Gebruiksaanwijzing /service van het product 410r van de fabrikant Ryobi
Ga naar pagina of 22
410r 2-Cycle Gar den Cultivator OPERA TOR’S MANUAL FOR QUESTIONS, CALL 1-800-345-8746 in U.S. or 1-800-265-6778 in CANADA www.ryobi.com IMPORT ANT MANUAL DO NOT THROW AW A Y.
THANK YOU Thank you for buying this quality product. This modern outdoor power tool will provide many hours of useful service. You will find it to be a great labor-saving device. This operator’s manual provides you with easy-to- understand operating instructions.
3 CALIFORNIA EMISSION REGULA TIONS W ARNING NOTE: For users on U.S. Forest Land and in the states of California, Maine, Oregon and Washington . All U.S.
RULES FOR SAFE OPERA TION 4 DANGER : Failure to obey a safety warning will result in serious injury to yourself or to others. Always follow the safety precautions to reduce the risk of fir e, electric shock, and personal injury . WARNING : Failur e to obey a safety warning can result in injury to yourself and others.
RULES FOR SAFE OPERA TION 5 • Be sure the tines are not in contact with anything before starting the unit. • Avoid accidental starting. Be in the starting position whenever pulling the starter rope. The operator and unit must be in a stable position while starting.
SYMBOL MEANING • WEAR EYE AND HEARING PROTECTION WARNING: Thr own objects and loud noise can cause severe eye injury and hearing loss. W ear eye protection meeting ANSI Z87.
RULES FOR SAFE OPERA TION 7 KNOW YOUR UNIT Tine Guard Tines Gearbox Primer Bulb Choke Control Air Filter/ Muffler Cover Spark Plug Muffler Fuel Cap On/Off Stop Control STOP/OFF (O) START/ON (I) Thrott.
ASSEMBL Y INSTRUCTIONS 8 Fig. 1 Fig. 2 Fig. 3 ASSEMBLING THE UNIT Your yard and garden cultivator has been completely assembled except for the handlebar, throttle cable and wheel bracket assembly. A large phillips screwdriver is needed for assembly. Unpacking 1.
ASSEMBL Y INSTRUCTIONS 9 Fig. 6 Fig. 5 Fig. 7 INST ALLING THE HANDLEBAR 1. Place the handlebar between the bottom and middle clamp pieces (Fig. 4). 2. While holding the three pieces together, position the handlebar underneath the shaft tube and align with the top clamp.
ASSEMBL Y INSTRUCTIONS 10 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Throttle Wire Hole Throttle Wire Slot Fig. 8 THROTTLE CABLE ASSEMBL Y 1. Wrap the throttle wire once around the handlebar (Fig. 8). 2. Depress the throttle trigger and locate hole for the throttle wire (Fig.
OIL AND FUEL INFORMA TION 11 WARNING: Gasoline is extr emely flammable. Ignited V apors may explode. Always stop the engine and allow it to cool before filling the fuel tank. Do not smoke while filling the tank. Keep sparks and open flames at a distance from the ar ea.
ST ARTING/STOPPING INSTRUCTIONS 12 Choke Control Full Choke Position (A) Starter Rope Throttle Control Primer Bulb Fig. 16 ST ARTING INSTRUCTIONS WARNING: A void accidental starting. Be in the starting position when pulling the starter rope (Fig. 16).
T ransporting the Unit WARNING: T o pr event serious personal injury , always stop the engine when operation is delayed or when transporting the unit from one location to another . 1. Stop the engine. 2. Slide the wheel bracket assembly all the way down.
MAINTENANCE AND REP AIR INSTRUCTIONS 14 AIR FIL TER MAINTENANCE Removing the Air Filter/Muffler Cover WARNING: T o avoid serious personal injury , always turn the unit off and allow it to cool before you clean or perform any maintenance on it. 1. Place the choke control in the PARTIAL choke position (B).
MAINTENANCE AND REP AIR INSTRUCTIONS 15 Cleaning the Air Filter WARNING: T o avoid serious personal injury , always turn the unit off and allow it to cool before you clean or perform any maintenance on it. Clean and re-oil the air filter every 10 hours of operation.
MAINTENANCE AND REP AIR INSTRUCTIONS 16 REPLACING THE SP ARK PLUG Use a Champion RDJ7Y spark plug (or equivalent). The correct air gap is 0.020 in. (0.5 mm.). Remove the plug after every 50 hours of operation to check its condition. 1. Stop the engine and allow it to cool.
CLEANING AND STORAGE 17 CLEANING THE UNIT WARNING: T o avoid serious personal injury , always turn the unit off and allow it to cool before you clean or perform any maintenance on it. • Use a small brush to clean off the outside of the unit and to keep the air vents free of obstructions.
TROUBLESHOOTING 18 CAUSE ACTION Old or improperly mixed fuel Drain fuel tank / Add fresh fuel mixture Improper carburetor adjustment Take to an authorized service dealer for carburetor adjustment Cult.
SPECIFICA TIONS 19 Engine T ype . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Air -Cooled, 2-Cycle Displacement . . . . . . . . . . . . . . . . . . . . . . . . . . . .
NOTES 20.
21 The California Air Resources Board and Ryobi Outdoor Products (ROP), are pleased to explain the emission control system warranty on your 1995 and later small off-road engine. In California, new small off-road engines must be designed, built and equipped to meet the State's stringent anti-smog standards.
ALL IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE TWO (2) YEAR WARRANTY PERIOD OR NINETY (90) DAYS FOR PRODUCTS USED FOR ANY COMMERCIAL PURPOSE. ACCORDINGLY, ANY SUCH IMPLIED WARRANTIES INCLUDING .
Een belangrijk punt na aankoop van elk apparaat Ryobi 410r (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Ryobi 410r heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Ryobi 410r vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Ryobi 410r leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Ryobi 410r krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Ryobi 410r bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Ryobi 410r kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Ryobi 410r . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.