Gebruiksaanwijzing /service van het product MIXPAD van de fabrikant Samson
Ga naar pagina of 40
Produced by On The Right Wavelength for Samson Technologies Corp. Copyright 1996, 1997, Samson Technologies Corp. Printed February, 1997 Samson Technologies Corp.
Introduction 1 MIXPAD Features 2 Guided T ours 4 MIXPAD 12/9 Channels 4 MIXPAD 12/9 Main Section 8 MIXPAD 12/9 Jackfield 10 Connecting the MIXPAD 4 Carrying Strap 11 MIXPAD 4 Channels 12 MIXPAD 4 Main.
Introduction Congratulations on your purchase of the Samson MIXPAD! One of the smallest mixers ever made, the MIXPAD provides excellent sound quality and a wealth of features normally found only in full-size units.
MIXP AD F eatures The compact design of the MIXPAD belies an extraordinary versatility. Add excellent sound quality to the equation, and you’ve got a product which is equally useful as a live performance mixer and for field recording applications.
MIXP AD F eatures • Constant level pan controls for placing each monophonic channel in the left-right stereo spectrum, as well as balance controls that allow you to blend the relative levels of stereo inputs.
4 Guided T our - MIXP AD 12 /MIXP AD 9 Channels 1 LEVEL LINE TRIM -50 -10 0 +4 MIC L R MONO 3 4 5 6 8 2 7 Mono Channel LOW HIGH +15 -15 O +15 -15 O +10 O +10 O LR PAN AUX 2 AUX1 PRE O +10 +10 O +10 O .
5 Guided T our - MIXP AD 12 / MIXP AD 9 Channels 1: Mic inputs - Provided in monophonic channels only (channels 1 - 6 in the MIXPAD 12 and channels 1 - 3 in the MIXPAD 9). Use these electronically balanced XLR jacks to connect microphones to any of the MIXPAD’s monophonic channels.
6 Guided T our - MIXP AD 12 / MIXP AD 9 Channels Balance control)—see the “Using Pan/Balance” section on page 28 for more information. See the “Connecting The MIXPAD” section on page 19 for additional information on how best to use channel inputs.
7 7: Balance (brown) - Provided in stereo channels only. When both inputs are connected to a stereo channel, the upper input signal (channels 7, 9, and 11 in the MIXPAD 12 and channels 4, 6, and 8 in .
8 Guided T our - MIXP AD 12 / MIXP AD 9 Main Section 1: Tape/CD inputs (L, R) - Use this set of dual RCA jacks to connect the outputs of a tape or CD player to the MIXPAD. In the MIXPAD 12, signal connected here appears at stereo channel 11/12 and is mixed at unity gain with any line input signal connected to channel 11/12.
9 Guided T our - MIXP AD 12 / MIXP AD 9 Main Section 2: Left/Right Peak LEDs (red) - These warning lights indicate an overload situation. They light whenever the main left or right output signal is 5 dB short of clipping.
10 Guided T our - MIXP AD 12 / MIXP AD 9 Jackfield 1: Aux Sends (1, 2) - These unbalanced 1/4" outputs allow you to route signal from each of the two discrete Aux Sends to external devices such as effects processors. Aux send 1 is pre-fade but post-EQ, while Aux send 2 is both post-fade and post-EQ.
The MIXPAD 4 is supplied with a handy carrying strap for easy portability. As shown in the illustration above, attach the strap to the MIXPAD 4 by placing the buckles in the connector slots and pressing them in firmly until they snap in place.
12 Guided T our - MIXP AD 4 Channels HIGH +15 -15 O +12 -12 O LR PAN LINE MIC LR LEVEL BALANCE O +10 O +10 TRIM -50 -10 0 -6 -20 LINE 3L 4R +10 O AUX +10 O AUX LEVEL ∞∞ ∞ ∞ LOW +15 -15 O MID 1.
13 Guided T our - MIXP AD 4 Channels 1: Mic inputs - Provided in monophonic channels only (channels 1 and 2). Use these electronically balanced XLR jacks to connect microphones to either of the MIXPAD 4’s two monophonic channels.
14 Guided T our - MIXP AD 4 Channels 4: Equalizer (violet) - These knobs determine the amount of boost or attenuation in each of three frequency areas. Each knob provides 15 dB of cut or boost at 12 kHz (High) and 80 Hz (Low) frequencies, and 12 dB of cut or boost at the Mid (2.
15 Guided T our - MIXP AD 4 Channels 7: Balance (brown) - Provided in the stereo channel (channels 3 - 4) only. When both inputs are connected to the stereo channel, the channel 3 input signal is automatically panned hard left and the channel 4 input signal is automatically panned hard right.
Guided T our - MIXP AD 4 Main Section 1: Tape/CD inputs (L, R) - Use this set of dual RCA jacks to connect the outputs of a tape or CD player to the MIXPAD 4. Signal connected here appears at the stereo channel (channels 3 and 4) and is mixed at unity gain with any line input signal connected to channel 3/4.
Guided T our - MIXP AD 4 Main Section 3: Left/Right Peak LEDs (red) - These warning lights indicate an overload situation. They light whenever the main left or right output signal is 5 dB short of clipping. To stop them from lighting (and to eliminate the accompanying sonic distortion), turn down the Main Level control (see #8 below).
Guided T our - MIXP AD 4 Jackfield 1: Main out (L, R) - These are the MIXPAD 4’s main outputs. You’ll usually use these to connect the MIXPAD 4 to a tape recorder or to a power amp and loudspeakers.
19 Connecting the MIXP AD - General Suggestions The actual connections you’ll make to and from the MIXPAD will vary according to the environment you use it in and the particular equipment you have, .
20 Connecting the MIXP AD - General Suggestions • Make one connection at a time and then monitor the incoming signal. If you hear a distinct hum or buzz, you may have a grounding problem with that particular device. See the section in this manual entitled “Grounding Techniques” (on page 26) for more information.
21 Connecting the MIXP AD - General Suggestions • In the MIXPAD 12 and MIXPAD 9, when connecting only one monophonic signal to a stereo channel, always use the upper input.
22 Setting Up and Using the MIXP AD Setting up your MIXPAD is a simple procedure which takes only a few minutes: 1. Remove all packing materials (save them in case of need for future service) and decide where the unit is to be physically placed.
23 Setting the Cor rect Gain Str ucture You’re now ready to establish the correct gain structure—the key to getting the best performance from the MIXPAD, or from any mixer, for that matter.
24 Setting the Cor rect Gain Str ucture h. Once you’ve set the optimum level in step (g) above, continue playing the instrument and slowly raise the power amplifier volume until you reach the level you want to hear. i. Repeat step (g) above for each instrument connected to the MIXPAD channel line inputs.
25 Setting the Cor rect Gain Str ucture l. The gain structure is now correctly set—you’ve optimized the level of all signals coming into and out of the MIXPAD, and the end result will be minimum noise and distortion and maximum clean sound.
26 Grounding T echniques Hum and buzz are the biggest enemies you face when interconnecting a large number of different pieces of equipment to a central audio mixer.
27 Grounding T echniques We also recommend that you use balanced audio cabling and connectors wherever possible. The MIXPAD provides electronically balanced inputs for mono line channel inputs and for its main outputs.
28 Using P an/Balance The final Main output of the MIXPAD is stereo—that is, there are two discrete output jacks, labeled “left” and “right,” which will normally be routed to a stereo power amplifier and two discrete speakers.* Because of this, you will usually be working with a stereo field that ranges from hard left to hard right.
29 Using P an/Balance In the MIXPAD 4 stereo channel (channels 3/4) and in MIXPAD 12 and MIXPAD 9 stereo channels (channels 7/8, 9/10, and 11/12 in the MIXPAD 12; channels 4/5, 6/7, and 8/9 in the MIX.
30 One of the most exciting aspects of using a mixer such as the MIXPAD is the ability to shape a sound, using a process called equalization . But there are few areas of sound engineering more misunderstood than equalization, and, just as good EQ can really help a sound, bad EQ can really hurt it, so read on.
31 Using Equalization In most instances, the best way to approach equalization is to think in terms of which frequency areas you need to attenuate, as opposed to which ones you need to boost (boosting.
32 Using Aux Sends and Retur ns The purpose of Auxiliary sends are to allow you to combine the signal from multiple channels and send the resulting mix to external devices such as effects processors. The MIXPAD 12 and MIXPAD 9 provide two such sends, while the MIXPAD 4 provides one.
33 Using Aux Sends and Retur ns outboard devices (via Aux sends). In practice, you’ll probably want to use the Aux returns to bring in signal from connected effects processors. If the effects processors have stereo outputs, they should be connected to both the left and right Auxiliary return inputs so that their stereo integrity is retained.
34 Appendix A: Operating the MIXP AD 12/9 off Batter y P ow er The MIXPAD 12 and MIXPAD 9 can optionally be battery powered. This requires the use of two 12 Volt rechargeable Lead-Acid (Gelcell) batteries, connected to the rear panel AC connector, wired as shown in the illustration below.
35 Appendix A: Operating the MIXP AD 12/9 off Batter y P ow er The current draw of the two models (without phantom power) are: MIXPAD9: 125mA (.125A) MIXPAD12: 160mA (.160A) Typical usage times for the two models: MIXPAD9 10 hours MIXPAD12 8 hours If you are using dynamic microphones, no phantom power is necessary.
36 MIXP AD 12 / 9 Specifications Normal Limit Frequency Response (Trim @ Min, unity gain ± 3 dB) Mic to Main 5 Hz - 65 kHz 10 Hz - 50 kHz Line to Main 5 Hz - 65 kHz Aux Return to Main 5 Hz - 75 kHz Line to Aux Send 1/2 5 Hz - 75 kHz T.H.D. (Trim @ Min, +4dBu output, unity gain, 1 kHz w/30 Hz LPF) Mic/Line to Main (Mono Ch) 0.
37 MIXP AD 4 Specifications Normal Limit Frequency Response (Trim @ Min, unity gain ± 3 dB) Mic to Main 5 Hz - 54 kHz 10 Hz - 50 kHz Line to Main 5 Hz - 54 kHz Aux Return to Main 5 Hz - 98 kHz Line to Aux Send 5 Hz - 57 kHz T.H.D. (Trim @ Min, +4dBu output, unity gain, 1 kHz w/30 Hz LPF) Mic/Line to Main (Mono Ch) 0.
Notes.
Een belangrijk punt na aankoop van elk apparaat Samson MIXPAD (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Samson MIXPAD heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Samson MIXPAD vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Samson MIXPAD leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Samson MIXPAD krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Samson MIXPAD bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Samson MIXPAD kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Samson MIXPAD . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
