Gebruiksaanwijzing /service van het product DVD-R135 van de fabrikant Samsung
Ga naar pagina of 90
Instruction Manual DVD-R135 English www .samsung.com AK68-01094A-00 01094A-R135-XSS-ENG_Cover 3/28/06 4:07 PM Page 1.
I MPORT ANT NOTE The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin face of the plug. If it requires replacing, a fuse approved to BS1362 of the same rating must be used.
English - 3 Important Safety Instructions Read these operating instructions carefully before using the DVD Recorder . Follow all the safety instructions listed below . Keep these operating instructions handy for future reference. 1) Read these instructions.
● Use a 700MB(80 minutes) CD-R/-RW disc. If possible, do not use a 800MB(90 minutes) or above disc, as the disc may not play back. ● If the CD-R/-RW disc was not recorded as a closed session, you may experience a delay in the early playback time, all recorded files may not play .
English - 5 ● If you want to record the disc in VR Mode and then record in V Mode, be sure to execute Format. Be careful when executing Format because all the recorded data may be lost. ● A DVD-RW blank disc is initialized to VR Mode when first initialized.
6 - English Getting Started Getting Started W arning ........................................................................2 Precaution ...................................................................3 Important Safety Instructions ..............
English - 7 Using Bookmarks .............................................................55 Using Markers ..................................................................56 Playing an Audio CD/MP3 .....................................57 Playing an Audio CD (CD-DA)/MP3 .
8 - English General Features High quality progressive scan Progressive scanning provides high resolution and flicker free video. The 10-bit 54-MHz DAC and 2D Y/C Separating Circuitry provides the highest image playback and recording quality .
English - 9 1) Be sure to be familiar with Safety Instructions before using this DVD Recorder . (See pages 2~5) 2) If a problem occurs, check for T roubleshooting. (See pages 84~87) About the use of this user ’s manual © 2006 Samsung Electronics Co.
10 - English Step 3 Recording There are two different recording methods, Direct Recording and T imer Recording. T imer recording is classified as a Date : Once, Daily , MO-SA, MO-FR, W -SA, etc. Recording mode : XP (high quality mode), SP (standard quality mode), LP (long recording mode), and EP (extended mode) according to the recording mode.
English - 11 Unpacking Accessories Check for the supplied accessories below . Preparing the Remote Control Install Batteries in the Remote Control ● Open the battery cover on the back of the remote control. ● Insert two AAA batteries. Make sure that the polarities (+ and -) are aligned correctly .
12 - English To determine whether your television is compatible, follow the instructions below . 1. Switch your television on. 2. Point the remote control towards the television. 3. Press and hold the ST ANDBY/ON button and enter the two-figure code corresponding to the brand of your television, by pressing the appropriate number buttons.
English - 13 Description Front Panel Display 1. Lights when a disc is loaded. 2. Lights in the record mode. 3. Lights to indicate the timer record mode. 4. Lights when a DVD-R/-RW disc is loaded. 5. Playing time/clock/current status indicator . 6. Lights in the progressive scan mode.
14 - English 1. RF IN / RF OUT Connects antenna cables. 2. HDMI OUT Connects the input of external equipment using a HDMI-HDMI cable or HDMI-DVI cable. 3. DIGIT AL AUDIO OUT(OPTICAL) Connects to an amplifier having a digital optical audio input jack. 4.
English - 15 T our of the Remote Control 1. ST ANDBY/ON Button 2. 0~9(Number) Buttons 3. TV/DVD Button Y ou can not use this button. 4. Reverse/Forward Skip Buttons Press to skip a disc backwards or forwards. 5. Reverse/Forward Step Buttons Press to play frame by frame.
16 - English A Quick Overview presented in this guide will give you enough information to start using the DVD Recorder . C onnecting & S etting Up Quick Overview Quick Overview.................................................16 Connecting the DVD Recorder .
English - 17 Connecting the DVD Recorder 1. Disconnect the aerial cable from your TV and connect it to on the rear panel of the DVD Recorder . 2. Connect of the DVD Recorder and the aerial input of your TV using the supplied aerial cable.
18 - English Case 2 : Connecting to an S-Video output jack 1. Connect an S-Video cable (not included) between the S-VIDEO OUT jack on DVD Recorder and S-VIDEO INPUT jack on your TV (or A V amplifier). 2. Connect audio cables (white and red) between the A V AUDIO OUT jacks on DVD Recorder and AUDIO IN jacks on TV (or A V amplifier).
English - 19 Case 3 : Component Video output jacks 1. Connect Component video cables(not supplied) between the COMPONENT OUT(Y ,P B ,P R ) jacks on DVD Recorder and COMPONENT IN(Y ,P B ,P R ) jacks on your TV . 2. Connect audio cables (white and red) between the AUDIO OUT jacks on the DVD Recorder and AUDIO IN jacks on TV (or A V amplifier).
20 - English C onnecting & Setting Up Case 3: Connecting to an A V amplifier with a digital output jack If your A V amplifier has a Dolby Digital, MPEG2 or DTS decoder and a digital input jack, use this connection. T o enjoy Dolby Digital, MPEG2 or DTS sound, you will need to set up the audio settings.
English - 21 C onnecting & Setting Up If your TV has a HDMI/DVI input, connect the HDMI/DVI cable to the TV . Y ou will enjoy the best quality images and sounds.
22 - English ■ If the input is not selected automatically , use INPUT SEL. button to select proper input. NOTE Case 2 : Connecting a Camcorder to the DV IN jack If your digital camcorder has a DV output jack, connect it to the DV input jack of your DVD Recorder .
English - 23 The on-screen menus allow you to enable or disable various functions on your DVD Recorder . Use the following buttons to open and navigate through the on-screen menus. 1 MENU Button Press this button on the remote control to open the on-screen MENU.
24 - English S ystem Setup Y our DVD Recorder will automatically set itself up when it is plugged in for the first time. TV stations and clock will be stored in memory . The process takes a few minutes. Y our DVD Recorder will then be ready for use. 1 Connect the RF cable as indicated on page 17.
English - 25 S ystem Setup This menu is used to set the current time. Y ou need to set the time to use timer recording. 1 With the DVD Recorder in Stop mode/No Disc mode, press the MENU button. 2 Press the …† buttons to select Setup , then press the OK or √ button.
26 - English S ystem Setup Y ou can add preset channel that Auto Channel Search missed. And you can delete a channel you wish to remove. Y ou can programme the order of channels. 1 With the DVD Recorder in Stop mode/No Disc mode, press the MENU button.
English - 27 4 Press the …† buttons to select Manual Setup , then press the OK or √ button. 5 Press the …† buttons to select a PR (programme) you wish to edit, delete, or swap, then press the OK or √ button. Select Edit , Delete or Swap using the …† buttons, then press the OK or √ button.
28 - English S ystem Setup Y ou can select one of four recording modes by pressing the REC MODE button repeatedly . EP mode is one of four REC Mode (XP ,SP ,LP ,EP). In EP(Extended Play) mode, you can set recording time to 6 or 8 hours by this setting.
English - 29 S ystem Setup ■ The Automatic Chapter Creation function does not work during T imer Recording or when you turn the power off. ■ DVD-R discs cannot be unfinalised. CAUTION 5 Press the …† buttons to select On or Off , then press the OK or √ button.
30 - English S ystem Setup Y ou can connect the DVD Recorder to an external amp or Home Theatre. Allow you to setup the Audio device and sound status depending on the audio system in use. Setting up the Audio Options 1 With the DVD Recorder in Stop mode/No Disc mode, press the MENU button.
English - 31 S ystem Setup Dynamic Compression This is only active when a Dolby Digital signal is detected. 1. On : When Movie soundtracks are played at low volume or from smaller speakers, the system can apply appropriate compression to make low-level content more intelligible and prevent dramatic passages from getting too loud.
32 - English S ystem Setup 1 With the DVD Recorder in Stop mode, press the P .SCAN button on the front of the DVD Recorder . The message “Press [Y es] to confirm Interlace scan mode. Otherwise press [No]” will appear . 2 Press the œ √ buttons to select Ye s , and then press the OK button.
English - 33 S ystem Setup ■ Press the RETURN or œ button to return to the previous menu. Press the MENU button to exit the menu. NOTE Display(Video) Options This function depends on disc type. It may not work for some disc types. TV Aspect Depending on the type of television you have, you may want to adjust the screen setting.
34 - English S ystem Setup 4 Enter the 4-digit password using the 0 to 9 buttons on the remote control. The ‘Confirm the password’ message will be displayed. Enter your password again. 5 Press the OK or √ button to select Password . 6 Press the …† buttons to select On or Off , then press the OK or √ button.
English - 35 1 Press the …† buttons to select Change Password . 2 Press the OK or √ button. The 'Enter the password' message will be displayed. 3 Enter the 4-digit password using the 0 to 9 buttons on the remote control. The ‘Confirm the password’ message will be displayed.
36 - English R ecording This DVD Recorder can record on various types of discs. Before recording, read the following instructions and select the disc type according to your preference. Recordable discs This DVD Recorder can record on the following discs.
English - 37 Unrecordable video V ideo with copy protection cannot be recorded on this DVD Recorder . When the DVD Recorder receives a copy guard signal while recording, recording stops and the following message appears on the screen.
R ecording 38 - English Recording the current TV programme you are watching Check that the disc has enough available space for the recording. Adjust the recording mode. 1 Press the OPEN/CLOSE button and place a recordable disc on the disc tray . 2 Press the OPEN/CLOSE button to close the disc tray .
English - 39 R ecording 5 Press the REC button. Information concerning the channel is displayed on the screen, then recording begins. REC icon( ) is displayed on the front panel. To view the current status of the disc and progress of recording : Press the INFO button, the information about the disc will appear .
R ecording 40 - English 5 Press the REC button . To pause recording Press the PLA Y/P AUSE( ) button to pause a recording in progress. ● Press the PLA Y/P AUSE( ) button again to resume recording. ● Y ou can switch channels by pressing the PROG (/) buttons while recording pauses.
English - 41 R ecording 5 To play the camcorder and find the starting point to be copied, select the play icon( ) on the top of the screen using the œ √ buttons and then press the OK button. 6 To start recording, select the record icon( ) on the top of the screen using the œ √ buttons and then press the OK button.
R ecording 42 - English Making a One T ouch Recording (OTR) Y ou can set the DVD Recorder to record in preset increments by pressing the REC button repeatedly . 1 If you want to record a TV channel, press the PROG (/ ) or number buttons to select a desired channel.
English - 43 R ecording 3 Set timer recording option. • Fill the input items using the arrow buttons and number buttons. œ √ : Moves to the previous/next item, …† , 0~9 : Sets a value. • Source : The video input source (A V1 or A V2), or the broadcasting channel you want to make a timer recording from.
R ecording 44 - English 4 Press the OK button. If the timer settings overlap The programmes are recorded in order of priority . If timer recording is set for the first programme and then again for the.
English - 45 4 Press the …† buttons to select Edit , then press the OK or √ button. ● The T imer Record Input item is displayed. Edit the items you want to modify . See the “Making a T imer Recording” section for more information on T imer Recording Input items.
46 - English Recording the Standard T imer List When the start time in the Scheduled record list reaches while the set is in power off, the set will be powered on and start the recording automatically . To stop Recording Press the STOP button. The message “Press STOP button once more to cancel T imer Record.
English - 47 P layback Read the following information before playing a disc. Region code (DVD-Video only) Both the DVD recorder and the discs are coded by region. These regional codes must match in order for the disc to play . If the codes do not match, the disc will not play .
48 - English P layback 1 Press the OPEN/CLOSE button. 2 Place a disc gently into the tray with the disc’s label facing up. 3 Press the OPEN/CLOSE button to close the disc tray . ● Y our DVD Recorder closes the disc tray and plays the disc automatically .
English - 49 P layback Using the Search Functions 1 During playback, press the SEARCH( ) button on the remote control. ● Y ou can scan the programme in reverse. To return to normal speed playback, press the PLA Y button. ● When you press and hold the SEARCH () button, playback is done at the default speed of Fast 2 .
50 - English P layback About ANYKEY The ANYKEY function allows you to easily search for a desired scene by accessing title, chapter , track, time. Y ou can also change the subtitle and audio settings and set some features including Repeat, Angle, Zoom.
English - 51 P layback Using the Repeat Function Using the REPEA Using the REPEA T button T button 1 Press the REPEA T button during playback. 2 Press the REPEA T or …† buttons to select T itle or Chapter you want to play repeatedly . Press the OK button.
52 - English P layback Using the Using the ANYKEY ANYKEY button button 1 Press the ANYKEY button during playback. 2 Press the …† buttons to select Repeat , then press the œ √ buttons to select T itle or Chapter you want to play repeatedly . 3 Press the OK button.
English - 53 P layback Selecting the Audio language Audio languages may not work depending on the disc type. This is only available during playback. Using the Using the AUDIO button AUDIO button 1 Press the AUDIO button during playback. 2 Press the AUDIO or …† buttons to select the desired audio language.
54 - English P layback Changing the Camera Angle When a DVD-VIDEO contains multiple angles of a particular scene, you can select the Angle function. This is only available during playback. If the disc contains multiple angles, the ANGLE mark appears on the screen.
English - 55 P layback 1 Press the MARKER button during playback. 2 Press the œ √ buttons to select a bookmarked scene. 3 Press the OK or PLA Y button to start playing from the selected scene. 1 Press the MARKER button during playback. 2 Press the œ √ buttons to select a bookmarked scene.
56 - English P layback Using Markers 1 Press the MARKER button during playback. 2 Press the OK button when the desired scene appears. The number 01 is displayed and the scene is memorized. 3 Press the œ √ button to move to the next position. 4 Press the OK button when the desired scene appears.
English - 57 P layback 1. … … † † : Selects a track (song). 2. √ √ : Plays the selected track (song). 3. OK button: Plays the selected track (song). 4. SKIP ( ) button: Plays the next track. 5. SKIP ( ) button: Returns to the beginning of the current track when pressed during playback.
58 - English P layback 1 Insert an MP3 Disc into the disc tray . 2 Press the …† buttons to select the Disc Navigation , and then press the OK or √ button. 3 Press the …† buttons to select the Music , and then press the OK or √ button. The MP3 menu appears and the tracks(songs) are played automatically .
English - 59 P layback 1. … … † † : Selects a track (song). 2. √ √ : Plays the selected track (song). 3. OK button: Plays back the selected track (song) or displays the files in the selected folder . 4. RETURN button: Moves to the folder to which the current song belongs.
60 - English P layback Using the Using the ANYKEY ANYKEY button button 1 Press the ANYKEY button during playback. The PLA Y MODE window appears. 2 Select the desired repeat mode ( T rack or Disc ) using the œ √ buttons, and then press the OK button.
English - 61 P layback 1 Insert a JPEG into the disc tray . 2 Press the …† buttons to select the Disc Navigation , and then press the OK or √ button. 3 Press the …† buttons to select the Photo , and then press the OK or √ button. 4 Press the …† œ √ buttons to select a picture.
62 - English P layback 5 -1 If you press the PLA Y button, the Slide Show Speed screen will appear . Press the œ √ buttons to set the slide show speed, then press the OK button.
English - 63 MPEG4 Function Description ■ This DVD Recorder can play the following video compression formats. - MPEG4 Codec format : DivX 3.1 1 DivX 4.
64 - English 2 Press the …† buttons to select T itle List , then press the OK or √ button twice. The T itle List screen is displayed. 3 Press the …† buttons to select an entry you want to play from T itle List, then press the OK or √ button.
English - 65 1. Playback screen for recorded entries. 2. Information window for the selected entry: T itle name, recording date, lock status, recording mode 3. Recorded entry No. 4. Recorded entry title 5. Recording length (i.e., the playing time) 6. T itle list edit items Play : Plays the selected entry .
66 - English ● T itle List A title is a section of recorded video and audio. T itle List shows a list to help you select a title. Since the title list consists of the information on stream that is actually recorded, if one title is deleted, that title cannot be played again.
English - 67 E diting Renaming(Labeling) a Title Follow these instructions to rename a title list entry , i.e., to edit the title of a recorded programme. Using the TITLE LIST button Using the TITLE LIST button 1 Press the TITLE LIST button. The T itle List screen is displayed Using the MENU button ● Press the MENU button.
68 - English E diting Locking(Protecting) a Title Follow these instructions to lock an entry to protect it from accidental deletion. Using the TITLE LIST button Using the TITLE LIST button 1 Press the TITLE LIST button. The T itle List screen is displayed Using the MENU button ● Press the MENU button.
English - 69 E diting Deleting a Section of a Title Follow these instructions to delete a section of a T itle List entry . Using the TITLE LIST button Using the TITLE LIST button 1 Press the TITLE LIST button. The T itle List screen is displayed Using the MENU button ● Press the MENU button.
70 - English E diting 4 Press the OK button at the starting point. The image and starting point time are displayed in the section deletion starting point window . Edit Title List Screen Elements 1. Playback bar 2. Playtime 3. Section deletion starting point window and time 4.
English - 71 E diting 5 Press the OK button at the end point. ● The image and end point time are displayed in the End window . ● The yellow-coloured selection bar moves to the Make item. - T o make a new playlist - 6 Press the OK button at the Make item.
72 - English E diting 3 Press the …† buttons to select Play , then select the OK button. ● To view the current status of the disc and progress of playback : Press the INFO button, and the information about the disc will appear . ● Press the INFO button once again.
English - 73 E diting 4 Enter the desired characters using the …† œ √ buttons. ● T his function is the same as the Rename function in renaming the title list. (See page 67.) ● The maximum number of characters that can be entered is 31. All 31 characters can be displayed by pressing the INFO button twice.
74 - English E diting Editing a Scene for the Playlist Follow these instructions to edit scenes for a playlist. 1 With the DVD Recorder in Stop mode, press the PLA Y LIST button. The Edit Playlist screen is displayed. Using the MENU button ● With the DVD Recorder in Stop mode, press the MENU button.
English - 75 E diting 7 Press the OK button at the end point of the scene. ● The image and ending point time are displayed in the End window . 8 Press the œ √ buttons to select Change , then press the OK button. ● The scene you want to modify is changed with the selected section.
76 - English E diting To setup, follow steps 1 to 3 in page 74. 4 Press the …† œ √ buttons to select the scene you want to move (change the position), then press the OK button. 5 Press the …† buttons to select Move , then press the OK button.
English - 77 E diting 7 Press the OK button at the end point of the scene. ● The image and time of the end point are displayed in the End window . ● To cancel, press the œ √ buttons to select cancel, then press the OK button. 8 Press the œ √ buttons to select Add , then press the OK button.
78 - English E diting 3 Press the …† buttons to select Delete , then press the OK button. ● Y ou will be prompted with the delete confirmation message “Do you want to delete?”. 4 Press the œ √ buttons to select Ye s , then press the OK button.
English - 79 E diting 4 Enter the desired characters using the …† œ √ buttons. ● T his function is the same as the Rename function in renaming the title list. (See page 67.) ● The maximum number of characters that can be entered is 31. All 31 characters can be displayed by pressing the INFO button.
80 - English E diting Disc Protection Disc Protection allows you to protect your discs from being formatted or deleted due to unintended operations. 1 With the DVD Recorder in Stop mode, press the MENU button. 2 Press the …† buttons to select Disc Manager , then press the OK or √ button.
English - 81 E diting 2 Press the …† buttons to select Disc Manager , then press the OK or √ button. 3 Press the …† button to select Delete All T itle Lists , then press the OK or √ button. ● Y ou will be prompted with the confirmation message “Do you want to delete all title lists?”.
82 - English Finalising a disc After you record titles onto a DVD-RW/DVD-R disc with your DVD recorder , it needs to be finalised before it can be played back on external devices. 1 With the DVD Recorder in Stop mode, press the MENU button. 2 Press the …† buttons to select Disc Manager , then press the OK or √ button.
English - 83 Unfinalising a disc (V/VR mode) 1 With the DVD Recorder in Stop mode, press the MENU button. 2 Press the …† buttons to select Disc Manager , then press the OK or √ button. 3 Press the …† button to select Disc Unfinalise , then press the OK or √ button.
A dditional Information 84 - English Recording is possible for DVD-RW/ DVD-R discs only . If a programme is copy protected, it cannot be recorded. Checkpoint 1 I pressed the REC button but there is no response. If your DVD Recorder malfunctions, go through the checkpoints below before contacting a Samsung autho- rised service centre.
English - 85 A dditional Information V ideo Be sure that the Video Setting is properly set. (See pages 32~33). Check whether there is damage to or any foreign material on your disc. Some low quality discs may not play properly . If scenes change from dark to bright suddenly , the screen may shake vertically temporarily , but this is not a fault.
A dditional Information 86 - English Sound Checkpoint 1 Checkpoint 2 Checkpoint 3 Checkpoint 4 No sound. Are you watching a programme in slow or skip mode? If you are playing a programme at a speed other than normal or Fast 1 speed, sound will not be heard.
English - 87 Remote Control Read the table of contents and then find and read the section describing your problem, follow the instructions given. T urn your DVD recorder off and on. If the problem still persists, contact a nearby Samsung service centre.
88 - English Specifications Power requirements Power consumption W eight Dimensions Operating temp. Other conditions V ideo Audio DV Input Receivable Channels Audio V ideo Picture Compression format Audio Compression format Recording Quality Audio Frequency Response AC 220-240V , 50Hz 21 W atts 2.
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. North America Latin America Europe CIS Asia Pacific Middle East & Africa CANADA 1-800-SAMSUNG (7267864) www .
AK68-01094A-00 English 01094A-R135-XSS-ENG_Cover 3/28/06 4:07 PM Page 2.
Een belangrijk punt na aankoop van elk apparaat Samsung DVD-R135 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Samsung DVD-R135 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Samsung DVD-R135 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Samsung DVD-R135 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Samsung DVD-R135 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Samsung DVD-R135 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Samsung DVD-R135 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Samsung DVD-R135 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
