Gebruiksaanwijzing /service van het product LE820 van de fabrikant Sharp
Ga naar pagina of 25
Page - 1 - Instructions for - Installation of Satellite Channels Updated: March 2011 ENGLISH Experience Reality AQUOS LCD-TVs – Spring/Summer 2011.
Page - 2 - LE82 0 - L E822 - L E814 - LE 824 - LE 914 - LE 925 Contents: 1. First installation 2. Sort channels manually 3. Receive signal from special satellites 4.
Page - 3 - 1. First installation When the device is switched on for the first time, first of all you need to set the language and later the type of installation (usually „Home“) and at the end choose the country in which the device will be used.
Page - 4 - The following image will appear: Remain on the button „Change settings" and confirm the choice with the „OK “ -button on the remote control. You will see the following: Choose the setting applicable to your satellite device and confirm your choice with the „OK “ -button on the remote control.
Page - 5 - After confirmation you will see the following image: Don't change anuthing and confirm it with the „OK“ button on the remote control. Now you will see the following: Choose the preferred satellite and confirm your choice with the „OK “ -button on the remote control (in this example Astra1).
Page - 6 - Choose „Yes“ and confirm your choice with the „OK “ button on the remote control. Now you will see the following: Confirm the displayed setting by pressing the „OK “ - button on the remote control. (An explanation of this setting can be found in the chapter „Frequently asked questions" in the appendix).
Page - 7 - If the settings are correct, don't change anything and confirm the choice of „Continue“ option with the „OK “ button on the remote control. Now you will see the following: Please don't start the search yet! Please highlight „Change settings“ and confirm your choice with the „OK “ - button on the remote control.
Page - 8 - Choose „Yes“ or „ No “ to conduct the search including or excluding coded channels and confirm your choice with „OK “ - button on the remote control. ! If you choose "Yes", coded channels will be included in the search.
Page - 9 - After pressing the „OK “ button you will see the following: Don't change anything and confirm "Yes" with the „OK“ button on the remote control. Now you will see the following: The device has started automatic search for tv stations.
Page - 10 - After choo sing the mode of sorting and confrming it with „ OK “ the TV will start displaying the tv-station which is stored at channel slot number one. ! Take into consideration the fact that the device may have more than one satellite channel list.
Page - 11 - 2. Sort channels manually When during the display of a channel you press the „OK“ button on the remote control, on the right edge of the screen a list of automatically sorted channels will appear. If you want to change the sequence of channels, it is posible by using the menu, „Set up“ and the point „Channel settings“.
Page - 12 - Don't change anything and confirm "Program settings " with the „OK“ button on the remote control. The following image will appear: Enter the 4-digit pin number (factory .
Page - 13 - Confirm „Satellite settings “ with the „OK“ button. In case in the original search settings 2 or more satellites are selected, you will see the following image: Choose the satellites, whose channel lists you would like to process and confirm your choice by pressing the „OK“ -button on the remote control.
Page - 14 - Choose „Manual set -up" and you will see the following: Confirm your choice with the „OK “ - button on the remote control. Now you will see the following: Confirm the choice „Yes“ by pressing the „OK “ - button on the remote control.
Page - 15 - ! Don't use the function key "Delete"- yellow button in the on-screen menu - in order to delete channels, before you sort all channels, as other channels will also be deleted. This would mean that you would have to spend a lot of time allocating other channels.
Page - 16 - Further steps for moving channels in the following screen: Confirm the newly chosen channel location by pressing „OK “ button on the re mote control. The channel will be moved to the chosen location and the following channels will be moved one place ahead.
Page - 17 - 3. Receive signal from special satellites If satellites other than provided in the menu are received, e.g. Türksat or Eutelsat 4/5, in the satellite selection the point „others“ can be chosen. The search settings must usually then be adapted to these satellites.
Page - 18 - Choose the point „SAT - Symbolrate 1“ and change the symbol rate over the digit keyboard of the remote control, as shown on the following im age.
Page - 19 - 4. Special case: attenuator In some rare cases it may happen that during the reception of HD channel for a short time small squares appear on the screen or the sound stalls. Often such effects are caused by the fact that the level of the satellite antenna is too high.
Page - 20 - Choose „Test antenna“ and the following image will be shown: Using the attenuator change the input level of the device, but during the process observe the „Quality“ scale and using the atennuator set the possibly highest value. It should reach 37-42.
Page - 21 - 5. Frequently asked questions Why haven't satellites been fully searched? Check the settings of SAT_system configurat ion (e.g. individual or DiSEqC_system). Why does the number of found channels seem too small? Check the settings of SAT_system configuration (e.
Page - 22 - 6. Definition of terms concerning satellite reception This compendium was prepared with the aid of the Internet website www.wikipedia.de You can find further information concerni ng this subject on the s ame webpage.
Page - 23 - 22kHz Switchbox is an electronic switch which is controlled with a 22kHz signal from the satellite receiver. The switch can be found between the receivers and the satellite equipment.
Page - 24 - Usually satellite systems are adapted to satellites from the "Astra 1" fam ily. Astra 1 is a tv satellite on the orbital position 19.2° East Astra 2 is a tv satellite on the orbital position 28.2° East Astra 3 is a tv satellite on the orbital position 23.
Page - 25 - suitable satellite antenna with visual contact with a satellite can receive the signal. A transponder can transmit many different satellite channels.
Een belangrijk punt na aankoop van elk apparaat Sharp LE820 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Sharp LE820 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Sharp LE820 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Sharp LE820 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Sharp LE820 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Sharp LE820 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Sharp LE820 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Sharp LE820 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
