Gebruiksaanwijzing /service van het product XLMP2H van de fabrikant Sharp
Ga naar pagina of 36
04/12/15 XL-MP2H_FRONT .fm Thank you f or purchasing this SHARP pr oduct. T o obtain the best performance fr om this product, please read this manual carefully . It will guide you in operating y our SHARP product. MICR O COMPONENT SYSTEM XL-MP2H Micro Component System consisting of XL-MP2H (main unit) and CP-MP2H (speaker system).
2 XL-MP2H General Information Special notes WARNINGS When the ON/STAND-BY button is set at STAND-BY position, mains voltage is still present inside the unit. When the ON/ STAND-BY button is set at STAND-BY position, the unit may be brought into operation by the timer mode or remote control.
3 XL-MP2H General Information Special Note Supply of this product does not convey a license nor imply any right to distribute content created with this product in revenue-generating broadcast systems .
4 XL-MP2H General Information Precautions General Please ensure that the equipment is positioned in a well ventilated area and that there is at least 10 cm (4") of free space along the sides and back. There must also be a minimum of 10 cm (4") of free space on the top of the unit.
5 XL-MP2H General Information Controls and indicators Front panel Reference page 1. CD Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 2. On/Stand-By Button . . . . . . . . . . . . . . . . . . . . . . . . . .
6 XL-MP2H General Information Controls and indicators (continued) Display Reference page 1. Memory Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 2. MP3/WMA Folder Indicator . . . . . . . . . . . . . . . . . . . . .
7 XL-MP2H General Information Remote control Reference page 1. Remote Control Transmitter . . . . . . . . . . . . . . . . . . . . . . . . 10 2. On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 3. CD Play/Pause Button .
8 XL-MP2H Preparation for Use System connections ANTENNA FM 75 OHMS AM GND Left speaker Right speaker Speaker connection (see page 9) AM loop aerial FM aerial Make sure to unplug the A C power lead bef ore any connections.
9 XL-MP2H Preparation for Use Aerial connection Attached FM aerial: Position the FM aerial wire in the direction where the strongest signal can be received. Supplied AM loop aerial: Connect the AM loop aerial to the AM loop aerial socket. Position the AM loop aerial for optimum reception.
10 XL-MP2H Preparation for Use Remote control Battery installation Precautions for battery use: Replace all old batteries with new ones at the same time. Do not mix old and new batteries. Remove the batteries if the unit will not be used for long periods of time.
11 XL-MP2H Basic Operation General control To turn the power on Press the ON/ST AND-BY button to turn the power on. Auto power off function In the stop mode of CD operation, the main unit enters the stand-by mode after 10 minutes of inactivity .
12 XL-MP2H Basic Operation Setting the clock In this example, the clock is set for the 24-hour (0:00) display. T o confirm the time display: Press the CLOCK/TIMER button.The time displa y will appear for about 5 seconds. Notes: T o reset the clock if the pow er fails or is unplugged, the unit must be in the ST AND-BY mode.
13 XL-MP2H CD or MP3/WMA disc Playback Listening to a CD or MP3/WMA disc This system can play bac k a standard CD , CD-R/RW in the CD f ormat and CD-R/RW with MP3 or WMA files, but cannot record on them. Some audio CD-R and CD-RW discs ma y not be playab le due to the state of the disc or the equipment used for recording.
14 XL-MP2H CD or MP3/WMA disc Playback Listening to a CD or MP3/WMA disc (continued) To interrupt playback: Press the CD / button during playback. Press the CD / button again to resume playback. To listen to the track being played again: During playback, press the button.
15 XL-MP2H CD or MP3/WMA disc Playback Advanced CD or MP3/WMA disc playback Direct track search By using the direct search buttons, the desired tracks on the current disc can be played. Notes: A track number higher than the number of tracks on the disc cannot be selected.
16 XL-MP2H CD or MP3/WMA disc Playback Advanced CD or MP3/WMA disc playback (continued) Repeat play (REMOTE CONTROL ONLY) Repeat play can pla y single track and all trac k sequence continu- ously .
17 XL-MP2H CD or MP3/WMA disc Playback Programmed play To cancel the programmed play mode: During programmed stop mode, press the MEMORY/DISP button and press the button or STOP button on the remote control. The display will show "CLEAR" and all the programmed contents will be cleared.
18 XL-MP2H CD or MP3/WMA disc Playback Advanced CD or MP3/WMA disc playback (continued) Programmed play (Folder mode) To cancel the programmed play mode: During programmed stop mode, press the MEMORY/DISP button and press the button or STOP button on the remote control.
19 XL-MP2H CD or MP3/WMA disc Playback MP3/WMA f older mode (only f or MP3/WMA files) T o playbac k MP3/WMA (Windows Media A udio) file There are many music sites on the internet that you can do wnload MP3/WMA (Windows Media A udio) music files. Follow the instructions from the website on how to download the music files.
20 XL-MP2H CD or MP3/WMA disc Playback MP3/WMA f older mode (only f or MP3/WMA files) (continued) Procedure to pla yback MP3/WMA disc T o playbac k CD-R/R W . Note: If "ERR DISC" is displayed, it means "Copyright protected WMA file" or "Not supported playback file" is selected.
21 XL-MP2H Radio Listening to the radio Tuning Notes: When radio interference occurs, auto scan tuning may stop automatically at that point. Auto scan tuning will skip weak signal stations. To stop the auto tuning, press the TUNING/FOLDER ( or ) button again.
22 XL-MP2H Radio Listening to the memorised station Memorising a station Up to 20 stations for FM band, 10 station for AM band can be preset. Note: The backup function protects the memorised stations for a few hours should there be a power failure or the AC power lead become disconnected.
23 XL-MP2H Tape Playback Tape playback Pause Press the PAUSE button to temporarily stop playback or record- ing. Press it again to resume operation. Fast forward and rewind Press the F.FWD or REWIND button. When the desired location has been reached, press the STOP/EJECT / button.
24 XL-MP2H Tape Recording Recording on a cassette tape Recording from CD or MP3/WMA disc Before recording: When recording important selections, make a preliminary test to ensure that the desired material is properly recorded. SHARP is not liable for damage or loss of your recording arising from malfunction of this unit.
25 XL-MP2H Tape Recording Recording from the radio When beat is heard Beat (a high-pitched noise) may sometimes be heard during the re- cording of radio broadcasts. If this occurs, set the BEAT CANCEL switch (the rear of the unit) to 1 or 2 position to reduce the level of the beat noise.
26 XL-MP2H Advanced Features Timer and sleep operation Timer playback Before setting timer: Continued to the next page 1 Check that the clock is set to the correct time (refer to page 12). If it is not set, you cannot use the timer function. 2 For timer playback, load the disc to be played back.
27 XL-MP2H Advanced Features To cancel Timer function: Notes: z After selecting the playback source, when press the CLOCK/ TIMER button to confirm, "SOURCE" will appear and blink for 2 seconds, then change to CD or TUNER mode. z When the preset time is reached, playback will start at current setting if no selected playback source is made.
28 XL-MP2H Advanced Features Timer and sleep operation (continued) Sleep operation The radio, compact disc and cassette tape can all be turned off au- tomatically. To confirm the remaining sleep time: To cancel the sleep operation: To cancel the sleep operation without setting the unit to the stand-by mode, proceed as follows.
29 XL-MP2H References Enhancing your system Headphones Before plugging in or unplugging the headphones, reduce the vol- ume. Be sure your headphones have a 3.5 mm (1/8") diameter plug and impedance between 16 and 50 ohms. The recommended imped- ance is 32 ohms.
30 XL-MP2H References Troubleshooting chart (continued) Tuner Cassette deck Remote control If trouble occurs When this product is subjected to strong external interference (me- chanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc.
31 XL-MP2H References Maintenance Cleaning the CD pickup lens Cleaning the cabinet Periodically wipe the cabinet with a soft cloth and a diluted soap so- lution, then with a dry cloth. Caution: Do not use chemicals for cleaning (petrol, paint thinner, etc.
32 XL-MP2H References Specifications As par t of our policy of continuous improv ement, SHARP reser ves the right to make design and specification changes f or product improv ement without prior notice. The perf or mance specification figures indicated are nominal values of production units .
MEMO MEMO 11/16/05, 4:41 PM 1.
MEMO MEMO 11/16/05, 4:41 PM 2.
FOR LOCATION ENQUIRIES WITHIN AUSTRALIA REGARDING YOUR LOCAL SHARP APPROVED SERVICE CENTRE VISIT OUR WEBSITE AT www.sharp.net.au OR CALL SHARP CUSTOMER CARE 1300 135 022 SHARP CORPORATION OF AUSTRALIA.
This Sharp product is warranted against faults in materials and manufacture for a period of twelve(12) months from the date of original purchase. The owner is responsible for any transportation and insurance costs if the product has to be returned for repair.
Een belangrijk punt na aankoop van elk apparaat Sharp XLMP2H (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Sharp XLMP2H heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Sharp XLMP2H vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Sharp XLMP2H leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Sharp XLMP2H krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Sharp XLMP2H bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Sharp XLMP2H kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Sharp XLMP2H . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
