Gebruiksaanwijzing /service van het product PYRO1394WebCam van de fabrikant Smith Micro
Ga naar pagina of 31
User’s Guide.
VideoLink Users Guide Smith Micro Software Inc. 2 Table of Contents WELCOME TO VIDEOLINK… .................................................................................................................4 ABOUT VIDEOLINK PRO… .....................
VideoLink Users Guide Smith Micro Software Inc 3 FREQUENTLY ASKED QUESTIONS ...........................................................................
VideoLink Users Guide Smith Micro Software Inc. 4 W ELCOME TO V IDEO L INK … …Your world-wide link to free communications. VideoLink is an Internet communications solution providing you with basic Video Conferencing capabilities. VideoLink is the "lite" version of our full-featured product VideoLink pro .
VideoLink Users Guide Smith Micro Software Inc. 5 A BOUT V IDEO L INK PRO … The VideoLink product that you have installed is a "lite" video conferencing-only version of our full-featured product VideoLink pro . VideoLink provides basic video conferencing capabilities where as VideoLink pro provides a much broader feature set.
VideoLink Users Guide Smith Micro Software Inc. 6 • Video - H.263 • All GateKeeper H.323 protocols • Access to full technical support via Email, web, telephone, and fax.
VideoLink Users Guide Smith Micro Software Inc. 7 G ETTING S TARTED … L AUNCHING V IDEO L INK Getting started with VideoLink is easy. The first time you launch VideoLink, the registration window displays asking you to register your e-mail address. In fact, you cannot start VideoLink until you have registered and authorized your e-mail address.
VideoLink Users Guide Smith Micro Software Inc. 8 R EGISTERING V IDEO L INK VideoLink is an Internet communications service allowing access to registered users only. You must register with VideoLink before using it. A registered user must have an authorized, legitimate e-mail address.
VideoLink Users Guide Smith Micro Software Inc. 9 • Unapproved : If you entered a non-verifiable e-mail address, your Control Strip module notifies you that your registration is rejected and you may not begin using VideoLink.
VideoLink Users Guide Smith Micro Software Inc. 10 A BOUT THE G ATEKEEPER VideoLink uses an Internet standard name server called a Gatekeeper in order to locate other VideoLink users. The Gatekeeper uses your email address as your internet ‘phone number’ allowing other internet phone users to locate and call you.
VideoLink Users Guide Smith Micro Software Inc. 11 P LACING A C ALL "Call" is the VideoLink function you use to connect to another VideoLink user. T O CALL ANOTHER V IDEO L INK USER : If not already logged on to the Internet, do so now then follow these steps: 1.
VideoLink Users Guide Smith Micro Software Inc. 12 • See Using Video Conference for Video Conferencing details. Incomplete Call? If your call cannot be completed, the reason for this displays in the call status area of the application window.
VideoLink Users Guide Smith Micro Software Inc. 13 U SING V IDEO C ONFERENCE When you have a video conference session, the VideoLink application window provides the appropriate audio and video control.
VideoLink Users Guide Smith Micro Software Inc. 14 Close box: Click to close the application window and to end the call at the same time. Click the Volume Controls to adjust the call's volume up or down. Display only. The Volume Level Display button indicates the current volume level.
VideoLink Users Guide Smith Micro Software Inc. 15 • Click the “X” button to stop sending video frames to the person you are video conferencing with. This will also blacken the local video display window. • Click the camera button to resume sending video frames to the person you are conferencing with.
VideoLink Users Guide Smith Micro Software Inc. 16 A NSWERING A C ALL In order to receive notification of an incoming call, must have VideoLink running. You are notified when a call comes in by a “ringing” sound and the display of the following dialog: Note the message: "You have an incoming Phone call from (person’s name or IP address).
VideoLink Users Guide Smith Micro Software Inc. 17 U SING THE V IDEO L INK C ONTROL S TRIP The VideoLink control strip lets you change your status and perform any of the major VideoLink functions. To open the control strip: 1. Click the VideoLink module on the Control Strip.
VideoLink Users Guide Smith Micro Software Inc. 18 C HANGING Y OUR S TATUS When you change your status on the VideoLink control strip menu, the color of the VideoLink module also changes. A red “X” on top indicates either Do Not Disturb or that you have not registered VideoLink yet.
VideoLink Users Guide Smith Micro Software Inc. 19 C HANGING Y OUR P REFERENCES When you first launch VideoLink, your initial preferences are automatically set based on your current system configuration.
VideoLink Users Guide Smith Micro Software Inc. 20 • Default Microphone Volume: Adjust the sensitivity of the sound in device that you have selected in the Default Audio Input Device popup menu. • Restore Defaults: Click to restore this panel to its default settings.
VideoLink Users Guide Smith Micro Software Inc. 21 1. Type in the person’s name and either the corresponding e-mail address or I.P. address. • Edit : Select a caller’s name from the list. (The list will be blank if you have not added anyone to this list yet.
VideoLink Users Guide Smith Micro Software Inc. 22 • Do not use a Gatekeeper : Select this if you plan to use VideoLink for LAN communications and do not want to send and receive calls over the Internet. Do not change this unless directed to by your system administrator.
VideoLink Users Guide Smith Micro Software Inc. 23 G ETTING H ELP Technical support is available for VideoLink. There is also an FAQ that begins on page 29 of this document as well as a Trouble Shooting section that begins on page 27 to aid you with VideoLink questions.
VideoLink Users Guide Smith Micro Software Inc. 24 T ECH S TUFF Please review the following sections for more technical details. R E - INSTALLING V IDEO L INK If you ever have the need to re-install your VideoLink software, review the instructions below: 1.
VideoLink Users Guide Smith Micro Software Inc. 25 S UPPORTED S TANDARDS VideoLink is a fully H.323 v3 standardized product. This includes the following standards: • Audio – G.
VideoLink Users Guide Smith Micro Software Inc. 26 W HERE V IDEO L INK F ILES A RE S TORED By default, VideoLink files are placed in the following locations: File Description Location VideoLink application Located in the VideoLink folder on root of the hard drive.
VideoLink Users Guide Smith Micro Software Inc. 27 T ROUBLE S HOOTING V IDEO L INK If you experience difficulties when using VideoLink, please refer to the information below before contacting Technical Support. Problem: Under "GateKeeper Status" in my VideoLink control strip module it says "GateKeeper unreachable".
VideoLink Users Guide Smith Micro Software Inc. 28 Solution: VideoLink relies on the Network and Open Transport functionality of the MacOS. This error occurred because the Network Setup Extension could not be found in the Extensions folder. You should reinstall it from the restore CD that came with your Macintosh.
VideoLink Users Guide Smith Micro Software Inc. 29 F REQUENTLY A SKED Q UESTIONS In addition to the Help Center, we have provided this FAQ to aid you in the use of VideoLink. Please browse this FAQ as well as the Trouble Shooting section for the answers to your questions before contacting Technical Support.
VideoLink Users Guide Smith Micro Software Inc. 30 Q) Is VideoLink based on any type of standard? A) Yes, VideoLink is a fully H.323 v3 compliant Internet communications client. This means that you will be able to communicate with any other H.323 compliant Video Conference client regardless of platform or vendor.
VideoLink Users Guide Smith Micro Software Inc. 31 Q) How do I move the VideoLink windows on my desktop? A) To move the My Favorites window or the VideoLink connection window on your desktop you must click in the gray oval shaped area at the top of the window and drag it to its new location on the desktop.
Een belangrijk punt na aankoop van elk apparaat Smith Micro PYRO1394WebCam (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Smith Micro PYRO1394WebCam heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Smith Micro PYRO1394WebCam vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Smith Micro PYRO1394WebCam leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Smith Micro PYRO1394WebCam krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Smith Micro PYRO1394WebCam bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Smith Micro PYRO1394WebCam kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Smith Micro PYRO1394WebCam . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
