Gebruiksaanwijzing /service van het product SV25500HV, ESV25550HV, SV25550HC, SV25650B van de fabrikant Snapper
Ga naar pagina of 16
Safety Instructions & Operator’s Manual for PUSH YARD VACUUM SERIES 0 RESIDENTIAL MODELS Model Mfg. No. SV25550HC SV25650B 7085638 7085687 COMMERCIAL M ODELS Model Mfg.
IMPORTANT SAFETY INSTRUCTIONS WARNING: This pow erful machine is capable of amputating hands and feet and can throw objects that can cause injury and damage! Failure to comply w ith the following SAFETY instructions could result in serious injury or death to the operator or other persons.
IMPORTANT SAFETY INSTRUCTIONS SAFE HANDLING OF GASOLINE (Continued From Previous Page) 3. DO NOT remove fuel cap or add fuel with the engine running. Allow the engine to cool before refueling.
4 TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIO NS ........................................................................ 2-3 TABLE OF CO NTENTS ..................................................................................................... 4 SETUP INST RUCTIONS .
5 SETUP INSTRUCTIONS The majority of the assembly has been co mpleted at the factory. After removing the machine from the shipping container you will be required to unfold the handles, attach the debris bag, and insert the accessory plug into the vacuum nozzle.
6 Section 1 – FAMILIARIZATION FIGURE 1.1 1.1 INTRODUCTION This manual has been prepared for the operator’s of the Yard Vacuum. Its purpose, aside from recommending standard operating procedures and routine service requirements, is to promote SAFETY through the use of accepted operating practices.
7 Section 1 – FAMILIARIZATION 1.3 SAFETY AND INSTRUCTION LABELS The safety and instruction labels included with your Yard Vacuum are very important. Read, understand and follow all instructions and warnings. Keep these labels clean and legible at all times.
8 Section 2 – OPERATING INSTRUCTIONS 2.1 PRE-START CHECK LIST Read, understand and follow instructions and warnings in this manual and on the machine, engine and attachments before operating. Know the controls and the proper use of the machine before starting.
9 Section 2 – OPERATING INSTRUCTIONS WARNING Entire debris bag and bag adapter must be properly installed before starting engine. The debris bag and bag adapter are subject to deterioration during normal use. Inspect frequently and replace if signs of deterioration are observed.
10 Section 3 – MAINTENANCE WARNING DO NOT attempt any adjustments, maintenance, service or repairs w ith the engine running. STOP engine. Remove spark plug wire from spark plug and secure aw ay from plug. Engine and components are HOT. Avoid serious burns, allow all parts to cool before w orking on machine.
11 Section 4 - ADJUSTMENTS & REPAIR WARNING DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. Stop engine. Remove spark plug wire from spark plug and secure aw ay from plug. Engine and components are HOT. Avoid serious burns, allow all parts to cool before w orking on machine.
12 TROUBLESHOOTING PROBLEM PROBABLE CAUSE CORRECTIVE ACTION Engine Will Not 1. F ue l ta nk e mp ty . 1. Fill fuel tank with fresh fuel to proper level. Start Using 2. Engine needs choking or priming. 2. Move control to “CHOKE”, press primer. Recoil Starter 3.
13 MAINTENANCE SCHEDULE SUBJECT SERVICE TO BE PERFORMED REFERENCE PAGES EACH USE 5 HOURS 25 HOURS 50 HOURS 100 HOURS EACH SEA SON Engine Check Oil Level Page 8 X Engine Initial Oil Change Page 10 X En.
14 PRODUCT REGISTRATION FORM IMPORTANT: KEEP THIS INFORMATION FOR YOUR PERSONAL RECORDS (Complete the following inform ation on your new purchase) Model _______________________________________________.
15 NOTES ___________________________________________________________________ ___________________________________________________________________ _______________________________________________________.
16 Safety Instructions & Operator’s Manual for PUSH YARD VACUUM SERIES 0 IMPORTANT These products are built using engines that meet or exceed all applicable emissions requirements on the date manufactured. The labels on those engines contain very important emissions information and critical safety w arnings.
Een belangrijk punt na aankoop van elk apparaat Snapper SV25500HV, ESV25550HV, SV25550HC, SV25650B (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Snapper SV25500HV, ESV25550HV, SV25550HC, SV25650B heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Snapper SV25500HV, ESV25550HV, SV25550HC, SV25650B vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Snapper SV25500HV, ESV25550HV, SV25550HC, SV25650B leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Snapper SV25500HV, ESV25550HV, SV25550HC, SV25650B krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Snapper SV25500HV, ESV25550HV, SV25550HC, SV25650B bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Snapper SV25500HV, ESV25550HV, SV25550HC, SV25650B kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Snapper SV25500HV, ESV25550HV, SV25550HC, SV25650B . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
