Gebruiksaanwijzing /service van het product Ericsson VH-410 van de fabrikant Sony
Ga naar pagina of 19
VH410 Extended User guide.
Contents Headset overview .........................................................................5 Introduction ..................................................................................6 Charging ............................................
1 2 3 4 5 6 8 7 9 1. 2. 3. 3 This is an Internet version of this publication. © Print only for private use..
4. 5. 3 1 2 6. 7. 1 2 4 This is an Internet version of this publication. © Print only for private use..
Headset overview See illustration 1. 1 Ear speaker 2 Ear hook 3 On/off key 4 Indicator light 5 Microphone 6 Volume keys 7 Call key 8 Charger connector 9 Ear bud 5 This is an Internet version of this publication.
Introduction The VH410 Bluetooth ™ Handsfree can be connected to any Bluetooth ™ compatible device that supports the headset. This User guide focuses on use with a Sony Ericsson mobile phone. 6 This is an Internet version of this publication. © Print only for private use.
Charging Before using the headset for the first time, you need to charge it with the supplied charger for 8 hours (See illustration 2). The normal charging time is 2.5 hours. Use Sony Ericsson chargers only. 7 This is an Internet version of this publication.
Turning on and off To turn on the headset • Press and hold down until the indicator light shows a steady green or red light. If the light is red, the headset needs charging. After 3 seconds, the light turns off and the headset is on. To turn off the headset • Press and hold down until the indicator light shows a green or red light.
Pairing the headset Pairing the headset with a phone To use the headset with a phone, you need to pair the headset with the phone. After successful pairing, the headset connects automatically to the phone as soon as the headset is turned on and within range.
Multipoint With the multipoint feature, you can use the headset with two different phones at the same time. Before you use this feature, you need to enable it. To enable the multipoint feature 1 Make sure the headset is turned off. 2 Press and hold down on the headset until the indicator light flashes green and red alternately.
Putting on the headset To put on the headset • Slide the ear hook behind your ear and point the microphone towards your mouth. See illustration 3 and 4. You can use the headset with or without the ear hook. You can also use the headset either on the left or right ear.
Calling When you have paired the headset with your phone, you can make and receive calls as long as the headset is turned on. To make a call • Dial the number using the phone keys. The call is automatically activated in the headset. To end a call • Press the end call key.
Battery A battery that has been infrequently used, or a new one, could have reduced capacity. You may need to recharge it a number of times. When the battery level is low, the indicator light flashes red and you hear a low beep. If you do not charge the headset, it turns off after 10 minutes.
Removing the cover To remove the cover • See illustration 6. You can see the regulatory information on the headset. 14 This is an Internet version of this publication.
Resetting the headset Reset the headset if it behaves unexpectedly. Resetting the headset removes all information about paired devices. To reset the headset • Press and hold down for 10 seconds. To reset the headset to factory settings • Simultaneously press and hold down and the call handling key during pairing mode.
Troubleshooting The headset is automatically turned off • The battery level is too low. You hear a beep approximately 10 minutes before the headset turns off. Charge the battery. • The headset turns off if you do not pair it with the phone within 10 minutes.
FCC Statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Industry Canada Statement This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Declaration of Conformity for VH410 We, Sony Ericsson Mobile Communications AB of Nya Vattentornet SE-221 88 Lund, Sweden declare under our sole responsibility that our product Sony Ericsson type DDA-0002028 and in combination with our accessories, to which this declaration relates is in conformity with the appropriate standards EN 300 328:V1.
Een belangrijk punt na aankoop van elk apparaat Sony Ericsson VH-410 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Sony Ericsson VH-410 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Sony Ericsson VH-410 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Sony Ericsson VH-410 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Sony Ericsson VH-410 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Sony Ericsson VH-410 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Sony Ericsson VH-410 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Sony Ericsson VH-410 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
