Gebruiksaanwijzing /service van het product BeoCom 1 van de fabrikant Bang & Olufsen
Ga naar pagina of 68
BeoCom 1 Guide.
.
3 Before you start… This Guide contains instructions in how to use the BeoCom 1 handset with a BeoLine base on the Public Switched T elephone Network (PSTN). How to use this Guide The following examples show what a key or status display looks like in an instruction sequence.
Contents Get started, 7 This chapter leads you through connection and setting-up of BeoCom 1, and instructs you in how to use the handset keys and the display . It also contains information about proper maintenance and about accessories available from your Bang & Olufsen retailer .
5 Prefer ence settings, 53 Find out how to register a handset to a base manually , choose a base, change the pincode for the base, and cancel the registration of a handset to a base. The chapter also includes an overview of the ‘Settings’ and ‘Advanced settings’ menus.
6.
7 Charge the handset battery , 8 First-time registration of a handset, 8 • Open the base and register the handset • Name the handset • Set BeoCom 1 for use with one or two lines • Set the time.
8 >> Get started Charge the handset battery If the handset requires charging, this occurs automatically when the handset is placed in the charger . For safety reasons, the battery is not charged prior to shipping. W e recommend that you charge the handset for at least one hour before proceeding further .
9 T o register a handset… Press to switch on the handset. The display prompts you to r egister the handset Press to continue. The handset sear ches for an open base When a base is located, the P ARK number – which identifies the base – is shown.
10 >> Get started Name the handset When registration is complete, the display prompts you to name the handset. Y ou can enter this setting at a later date, if you wish.
11 Set the time and date After you have registered the handset, named it and set it up for use with the telephone lines to which you have access, the display prompts you to set the time and date. The time is shown when the phone is not in use and when there is no new information in the display .
12 >> Get started Phone feedback – indicator lights Indicator light on the handset The indicator light flashes red when… – The phone is of f the hook – The phone rings – Unanswer ed Caller IDs are r egistered.
13 Placement and surroundings The phone must not be placed in damp, dusty or polluted surroundings and should not be exposed to direct sunlight or liquids. Avoid the handset charging contacts touching metal or greasy parts. Clean BeoCom 1 Clean your BeoCom 1 with a soft, damp cloth with a few drops of mild detergent added.
14 >> Get started The handset display Open the display… Press while the handset is in standby T ur n the wheel to view options in the display Press to select an option Options in the main menu – Redial list… See the list of outgoing calls – refer to page 26.
15 s Alert t View? s No contact t with base s No dial tone t Line 1 s Battery needs t recharging s The clock has t not been set If you wish to bring up the main menu without viewing the alert, simply turn the wheel.
16 A • V A..Z INT C LINE 1 LINE 2 HOLD 1 0 2 ABC 3 DEF 4 GHI 5 JKL 6 MNO 7 PQRS 8 TUV 9 WXYZ Clock Jun 3 11:17 AM The display is illuminated when the handset is in use.
17 Battery status The battery indicator in the display shows the charge level of the handset battery . If the batteries require charging, this appears automatically in the display and the handset warns you with an audible signal.
18.
19 Make and answer calls, 20 • Make a call • Answer a call • Mute the ringing of a single incoming call Lock the handset keypad, 21 Silence the handset ringer and battery alert, 22 V olume and t.
20 >> Daily use Make and answer calls The key on the BeoCom 1 is used to start and end a call. During the call, the phone displays the active line, the duration of the call and the number or name of the person called. If you do not wish to answer a call, you can mute the ringing signal.
21 OK s Redial list t s Lock keypad? t OK Keypad locked OK Unlock s No? t Unlock s Y es? t OK Lock the handset keypad Y ou can lock the handset keypad to avoid inadvertent key activation when, for example, you carry the handset in a pocket. If you lock the handset keypad, you can still answer calls, but you have to unlock the keypad to make a call.
22 >> Daily use Silence the handset ringer and battery alert Y ou can silence the handset ringer for situations in which you do not want to be disturbed - if you’re in a meeting, for example, or taking a nap.
23 V olume s === ==== t OK s Mic. off? t OK Microphone off OK OK V olume and the microphone During a call, you can adjust the volume level using the wheel. Y ou can also switch off the microphone if you do not wish the person on the phone to overhear a conversation you are having with a person in the room.
24 >> Daily use Store a number after a call After a call, you will be asked whether you want to store the number in the Phonebook, if it is not already there. Y ou can also enter a name with the number . After a call… The display shows the number and prompts you to store it in the Phonebook.
25 David Jones 5551212 A..Z First letter: A BDEFHIK First letter: ABDEFHIK OK Dan Smith 5551234 David Jones 5551212 Search the Phonebook and make a call When the phone is not in use, you can turn the wheel to search directly from the entire list of names in the Phonebook.
26 >> Daily use Use Redial The Redial function stores the last 24 telephone numbers you called. In addition to the number called, you can also view the time, date, and duration of the call. If you have entered a name in the Phonebook, this is displayed instead of the number .
27 OK s Redial list t OK 1:David Jones Dec 12 9:00 AM 1:John Smith Dec 10 11:51 AM OK 1:John Smith s Call? t 1:John Smith s Delete? t OK 1:John Smith Deleted T o delete a specific Redial number from t.
28 >> Daily use Use Caller ID The last 24 numbers you have received calls from are stored in the Caller ID list. If a name is stored with the number in the Phonebook, this name is shown, even if your phone company has provided Caller ID information.
29 OK s Redial list t s Caller ID list t OK 1:David Jones Dec 12 9:00 AM 1:John Smith Dec 10 11:51 AM OK 1:John Smith s Call? t 1:John Smith s Delete? t OK 1:John Smith Deleted T o delete a specific C.
30 >> Daily use Delete the content of the Caller ID and Redial lists If, for example, you use the phone often during the course of a day , and you prefer to keep call information only for calls made or received that day , you may find it useful to delete the entire content of the Caller ID list, the Redial list, or both.
31 Switch between two calls, 32 • Calls on separate lines • Calls on the same line – Call Waiting Conference calls, 34 • A two-line conference call • Conference call on one line – Three-Party call Choose a primary line, 36 BeoCom 1 is a two-line phone, made to handle up to four calls – two on each line – at the same time.
32 >> 2-line use Switch between calls on separate lines BeoCom 1 makes it possible for you to handle simultaneous calls on separate lines. The display shows which line is active and whether or not a call on the other line is placed on hold.
33 Switch between calls on the same line – Call W aiting Use the OK key to place a call on hold while you answer an incoming call, or to switch between two calls.
34 >> 2-line use A two-line conference call When you have simultaneous calls on both line 1 and line 2, you can connect the calls and establish a conference call.
35 Conference call on one line – Thr ee-Party Call When you establish a Three-Party Call, the first call made can be an incoming or outgoing call, but you must initiate the second call yourself. Please contact your phone company for more information about the Three-Party Call service.
36 >> 2-line use Choose a primary line Choosing a primary line for outgoing calls gives you several advantages. Y ou can dedicate each line to a specific purpose, making one line a private line and the other a line for work-related calls. Y ou can also keep separate Caller ID and Redial lists.
37 Enter a new name and number in the Phonebook, 38 Delete a name and number in the Phonebook, 39 Edit a name or number in the Phonebook, 40 Store Redial and Caller ID numbers, 42 Adjust volume level .
38 >> Advanced operations Enter a new name and number in the Phonebook At any time, you can store a name and number in the Phonebook. A number can contain up to 30 digits, and a name up to 16 characters. Y ou can store up to 200 entries. T o enter a number… Enter the telephone number Press to be able to stor e the number .
39 Delete a name and number in the Phonebook Y ou can delete names and numbers stored in the Phonebook. Press A..Z T ur n the wheel to select a first letter and press OK T ur n the wheel to select an entry and press OK T ur n the wheel until Delete? appears in the display and press OK to delete the entry A.
40 >> Advanced operations Edit a name or number in the Phonebook Y ou can edit a Phonebook entry – which typically contains a number and a name – at any time. Delete characters and digits in reverse order , and replace them using the wheel and the digit keys.
41 T o edit a name… The display prompts you to confirm that the number is correct Press to confirm. The display pr ompts you to confirm that the name is correct If the name is correct, pr ess OK.
42 >> Advanced operations Store Redial and Caller ID numbers T elephone numbers from the Redial and Caller ID lists can be stored and named in the Phonebook.
43 Adjust volume level on audio/video products Y ou can adjust the volume of your Bang & Olufsen audio and video products directly from your handset. First select which sound source, audio or video, you wish to adjust. T o adjust the volume of an Audio or Video system… Press A .
44 >> Advanced operations Call and store extension numbers in the Phonebook If you need to make a call to an extension number , such as those used by banks and other large businesses with switchboards, a pause must be inserted before the extension number .
45 Enter the extension number Press twice to stor e the entry . Y ou can then give the number a name, as described on page 38 T o call an extension number from the Phonebook… T ur n the wheel to search thr ough the entire Phonebook Press to make a call.
46.
47 Call another handset, 48 Make a handset ‘personal’ or ‘common’, 49 T ransfer exter nal calls, 50 Make an internal conference call, 51 With several handsets registered to one base, you can make your own phone system. All the handsets can receive external calls, also during internal calls between handsets.
48 >> System use with several handsets Call another handset Y ou can call one handset or call all handsets simultaneously . If you call all handsets, the handset that responds first receives the call. If you call one handset, the display shows which handset has been called.
49 OK s Redial list t s Settings t OK s Advanced t settings OK s Handset t OK s Handset type t OK s Common? t OK Make a handset ‘personal’ or ‘common’ Y ou can set your handset to be ‘personal’ instead of ‘common’. The Phonebook, Redial list and Caller ID list of a personal handset are located in the handset and not the base.
50 >> System use with several handsets T ransfer external calls Y ou can transfer an external call to one handset or to all handsets. Y ou can speak with the person answering the internal handset before transferring the call. When you transfer an external call to all handsets, the call goes to the handset which answers first.
51 INT 1 – 8 Living room 3 s Conference? t OK OK Make an internal conference call During an external call, you can call another party on an internal handset to establish a conference call. If one party hangs up, the call continues with the remaining parties.
52.
53 The Settings menu, 54 The Advanced settings menu, 56 Many BeoCom 1 functions can be activated, adjusted, and deactivated to help you tailor the phone to the way you want to use it. This is mainly done via the Settings and Advanced settings menus. This chapter provides an overview of these two menus.
54 >> Preference settings The Settings menu The Settings menu contains several options which allow you to connect, disconnect or adjust BeoCom 1 functions.
55 Primary line… Choose a default line – Line 1 , Line 2 or None – for outgoing calls. Choosing a primary line lets you dedicate each line to a specific purpose, for example, if you wish to keep private calls and work-related calls separate. It also allows you to keep separate Caller ID and Redial lists for each line.
56 >> Preference settings The Advanced settings menu The Advanced settings menu contains several options which allow you to connect, disconnect or adjust BeoCom 1 functions.
57 The Advanced settings menu options Handset… The Handset menu contains three sub-menus: – Change name allows you to give the handset a new name using the wheel and OK keys. Note that this menu is called Enter name until you have entered a name for the handset.
58 Important information about BeoCom 1 T echnical data Number of handsets per base: 8 T alk time per charging: 10 hours Standby time per charging: 150 hours Charging time: 4 hours Range: The phone has an indoor range of up to 165 feet (50 metres), and an outdoor range of up to 1000 feet (300 metres).
59.
60 Accessories Accessories, 13 Attach the clip, 13 Base Cancel registration of a handset, 56 Change the base pincode, 56 First-time registration of the handset to a base, 8 Manual registration of a ha.
61 Delete Caller ID call, 29 Delete the content of the Caller ID and Redial lists, 30 Name or number in the Phonebook, 39 Redial number , 27 Displays and menus Display of new , unanswered calls, 14 Op.
62 Redial Store Redial and Caller ID numbers, 42 Use Redial, 26 Registration Cancel registration of a handset, 56 First-time registration of the handset, 8 Manual registration, 56 P ARK numbers, 8 Rin.
63.
64 NOTICE: The Industry Canada label identifies certified equipment. This certification means that the equip- ment meets telecommunications network protective, operational and safety requir ements as pre- scribed in the appropriate T erminal Equipment T echnical Requirements document(s).
65 For the American market only… This equipment complies with Part 68 of the Federal Communications Commission (FCC) rules for the United States. A label is located on the underside of the base unit containing either the FCC registration number and Ringer Equivalence Number (REN).
66 For your information… Y our needs as a user are given careful consideration during the design and development process of a Bang & Olufsen product and we strive to make our products easy and comfortable to operate. Therefore, we hope that you will take the time to tell us about your experiences with your Bang & Olufsen product.
.
www .bang-olufsen.com.
Een belangrijk punt na aankoop van elk apparaat Bang & Olufsen BeoCom 1 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Bang & Olufsen BeoCom 1 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Bang & Olufsen BeoCom 1 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Bang & Olufsen BeoCom 1 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Bang & Olufsen BeoCom 1 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Bang & Olufsen BeoCom 1 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Bang & Olufsen BeoCom 1 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Bang & Olufsen BeoCom 1 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
