Gebruiksaanwijzing /service van het product SIPMPDVFH van de fabrikant Speco Technologies
Ga naar pagina of 64
i Speco Internet Protocol (SIP)H.264 Series Camera Instruction Manual (Version 1.0.0) SIP H.264 Me gapixel Camer as SIPMPBVFH & SI PMPDVFH Speco Technologies 200 New Hwy, Amityville, NY 11701 800-645-5516 www.
ii Table of Contents 1. FEATURES ....................................................................................................... 1-1 1.1 Package ..................................................................................................
iii Profile Upload .......................................................................................................................... 2-55 Save & Reboot ......................................................................................
.
1-1 1. F EATURES 1.1 Package Package of Products is composed of the main body of the camera, Software CD (NVR Program, Product Manual, NVR Manual), Quick Install Guide, Cross LAN Cable, Accessory Pack, Power Lead Cable. Please check before starting installation.
1-2 1.2 Dimension a nd Connector Description 1.2.1 Dimensions 1. SIPMPBVFH ① ② ③ ④ ⑥ ⑤.
1-3 2. SIPMPDVFH ① ② ③ ④ ⑤.
1-4 1.2.2 Connector Descripti on ① 12 V olts DC Power Input ② A udio Ou tput ③ A udio Input : The S I P Camera supports one aud io input and output ④ Ether net Port : Standard RJ45 connector.
2-5 2. INSTALLATION 2.1 Recommend ed PC Specification CPU Core2Duo 2.13GH z and above Memory 2 GB or above Operating Sy stem Windows XP with SP2 or above. Windows Vista / Windows 2003 / Windows 7 Internet Explorer 6.0 S P2 and above. Video Resolution SVGA or XGA wi th 1024x768 resolut ion CPU Core2Duo 2.
2-6 2.2 Preparation before setup To configure your IP device, you have to use Internet Explorer to log in. Before that, your PC’s network settings and the IP device’s IP address must be set up. Make sure all the connections are connected correctly, and then follow the procedures below.
2-7 The procedure below is the setup procedure of a PC using Windows XP as its OS. When running an OS other than Windows XP, please refer to the manual included with the OS.
2-8 STEP 3 Double-click the "Network and Internet connections" icon. STEP 4 D ouble-click the "Network connections" icon.
2-9 STEP 5 Click “Local Area Connections”, and then click “Change settings of this connection” in the network Task menu. STEP 6 Click “Internet Protocol (TCP/IP)”, and then click the [Properties] button.
2-10 STEP 7 Click the “Use the following IP address” radio b utton and enter th e IP address and the subnet mask. STEP 8 Click the [OK] button and the window dialog box closes. Please set the settings as below. IP address: 192.168. 0.xxx Subnet mask: 255.
2-11 2.3 Configuring the IP device This section describes how t o configure the I P device. The product administrator has unlimit ed access to all setup windows and normal users can only watch the live image. The IP device is configured under a standard browser (Microsoft Internet Explorer 6.
2-12.
2-13 2.3.1 Video Display This section tells you how to view live images via Internet Explorer. Click the [Live] tab to show [ Live page]. Refer to the table below for how to configure each setting. Function List Function Description Full Screen Click the icon to stretch the preview to full screen.
2-14 Audio out Click the icon to enable the audio out from PC to IP camera or video server. When it is enabled, your voice will be transferred to the audio out of the IP camera or video server. NOTE: you will need to have a microphone connected to your PC to do that.
2-15 not zoomed-in (no zoom status). Network status Indicates the network state. If the light on the right is green, it means the network is ok. If the light is gray, it means the network is broken. The light on the left is not used DO Setting Click to set DO output level to High.
2-16 2.3.2 Date & Time This section tells you how to setup IP device’s date and time settings. STEP 1 : Click the [Date & Time] on the “Main Setup page”. The “Date setting page” is displayed as below STEP 2 : Configure these settings with reference to the table below.
2-17 manually Date : Select the date Time : Select the time Time zone Select the time zone offset for local settings Day Light Saving Select Type 1 to specify da ylight saving time by week number in a month; sele ct Type 2 to specif y daylight saving time by date.
2-18 2.3.3 Network Section Click the [Network] item on the “Setup Page”..
2-19 Host Click the [Host] to enter Host settings page. Refer to the table below for how to configure each setting. Parameters Description Host name Enter a host name, and this host name will be shown when you use the IP utility or the SDK to search for the IP device.
2-20 IP Address Filter ing Click the [IP Address Filter] item to display the “IP Address Filtering Page”. Refer to the table below for how to configure each setting. WARNING: Please be very careful when using this function, as you may lose access to your camera if you make mistakes in setup.
2-21 Parameters Description IP address filter enable Check this box to enable IP Address Filtering. Filter Method The filter can be set in either “Allow” mode or “Block” mode. 1. “Allow” mode will refuse access to all IP addresses except the ones listed below.
2-22 Port Mapping Click the [Port Mapping] item to display the “Port Mapping Page”. Refer to the table below for how to configure each setting. Parameters Description HTTP port Select the port ass.
2-23 Video streaming port (TCP Only) Select the port used by this IP device for Video Streaming. Video Multicast Port Enable/disable multicast audio streaming RTSP port Select the port assigned for RT.
2-24 ToS Click the [ToS] (Type of Service) item to display the “ToS Page”. Refer to the table below for how to configure each setting. Parameters Description TOS (type of service) Select whether to add the TOS tag onto the streaming data. Streaming data with a higher priority TOS tag will be transmitted first when compared with other data.
2-25 UPnP TM Click the [UPnP TM ] item to display the “UPnP TM Setting Page”. Click checkbox to enable or disable the UPnP TM function. Edit the UPnP Friendly Name in text field. Click the [Apply] button to confirm the settings or click the [Reset] button to re-enter the parameters.
2-26 SNMP Setting Click the SNMP Setting item to display the SNMP setting Page Click to enable SNMP function. Select to us e SNMP V1/V2 or to use SNMP V3 Check the check box to enable traps Enter the .
2-27 RTSP Authen Enable Check box to enable RTP streaming’s Account/Password authentication. RTP B2 Frame Enable Check box to enable the B2 frame in RTP streaming Click the [Apply] button to confirm the settings or click the [Reset] button to re-enter the parameters.
2-28 Speed & Duple x Click the [Speed & Duplex] item in the network section to display the ”Speed and Duplex” Page. Refer to the table below for how to configure each setting. Parameters Description Network speed This item lets you select the network transmission speed.
2-29 2.3.4 IP Setting s Connection Type Click the [Connection Type] item to display the “Connection Type Page”. Refer to the table below for how to configure each setting. Parameters Description Dynamic IP address Click this to enable IP device’s DHCP function.
2-30 IPV6 Click the check box to support IPV6 protocol Click the [ Apply] button to confirm the settings or click the [R eset] button to re-enter the parameters.
2-31 DNS Click the [DNS] item to display the “DNS Server Settings Page”. Refer to the table below for how to configure each setting. Parameters Description Primary DNS server Defines the IP address of the primary DNS server. This is used for identifying this computer by name instead of IP address.
2-32 DDNS Click the [DDNS] item to display the “DDNS Server Setting Page”. Refer to the table below for how to configure each setting. Parameters Description DDNS type Click this to enable IP device’s DDNS function. DDNS function enables user to connect to this IP device b y domain name even if its IP address is not static.
2-33 2.3.5 Video & Audio Click the [Video & Audio] item on the “Setup Page”. Please note that some elements may not appear on all models. Video Click the [Video] item to display the “Video Page”. The functions here are grouped under different tabs.
2-34 Parameters Description Live View Live view of the camera Activity Motion activity status Video Flipping Check this box to flip the video up-down Video Mirror Check this box to mirror the video le.
2-35 Image (CCD Models) This tab concerns the general video settings. Please refer to the table below for functions. Parameters Description Live View Live view of the camera Activity Motion activity s.
2-36 Day/Night (CMOS Non-D/N Models) This tab concerns the day and night switch timing for your camera. Please refer to the table below. Parameters Description Switch from Day mode to Night mode This value controls the level of light where camera switches into night mode.
2-37 Bar to night or day mode (Blue bars), and shows the current detected illumination level (Green bars). Use this bar to fine tune the day/Night switch timing. Get Current Exposure Level Clicking this button will refresh the illumination level reading from the camera sensor.
2-38 Parameters Description Day/Night Mode Select the day/night mode. Auto: The camera would switch between day and night mode automatically. It will follow Day to Night and Night to Day threshold defined by user below. Day: The camera will stay in da y (Color) mode.
2-39 Day/Night (CCD D/N Models) This tab concerns the day and night switch timing for your camera. Please refer to the table below. Parameters Description Day/Night Mode Select the day/night mode. Auto: The camera would switch between day and night mode automatically.
2-40 mode to Night mode switches into night mode. Increasing it will make camera switch to night mode at a darker illumination level. Switch from Night mode into Day Mode This value controls the level of light where camera switches into Day mode. Increasing it will make camera switch to night mode at a darker illumination level.
2-41 Motion Detection Click the [Apply ] button to confirm the settings or click the [Reset] button to re-enter the parameters. Video Motion Detection: STEP1: Click the Plus sign to expand the Motion Detection settings then Click the Motion Enable checkbox to enable motion detection.
2-42 STEP2: Click the checkbox to enable motion detection for each individual region . STEP3: Click one region to start to edit its size and location. You can click the “Adjust Column” to drag motion region to your desired location. You can click the “Adjust Square” and drag to adjust motion region size.
2-43 Compr ession There are two streams output available for this network device. Click the [Stream 1] or.
2-44 [Stream 2] item to display the content page, Contents for both stream are identical. Refer to the table below for how to configure each setting. Para meters Description Encoder Type Select the encoder’s compression type. MPEG-4 / MJPEG / H.264 Resolution Select the video resolution of the IP device.
2-45 (Stream2) down list. Frame rates available for stream 2 may be less than stream 1, depending upon the setting. Quality When encoder type is MJPEG: Select the quality value of MJPEG encoder type from 1 to 100. Click the [Apply] button to confirm the settings or click the Reset] button to re-enter the parameters.
2-46 Exposure Mode Select exposure mode to auto or manual. 1. Auto: The IP camera will adjust the exposure automatically. 2. Manual: Manuall y sel ect the Exposure Gain and Shutter Speed below . Da y and night mode change will not operate as norm al under manual Exp osure.
2-47 Exposure Mode Select exposure mode to auto or manual. 1. Auto: The IP camera will adjust the exposure automatically. Manual: Manually select the Exposure Gain and Shutter Speed below.. White Balance (In Indoor/Outdoor/Auto/Hold profiles only) Select the white balance mode.
2-48 Audio Audio In Select to enable or disable the audio in function. Audio In sensitivity Select the sensitivity of audio microphone. Audio Out Volume Adjust the Audio Out volume. Click the [Apply] button to confirm the settings or click the [Reset] button to re - enter the parameters.
2-49 OSD/Privacy Mask OSD (On Screen Display) and Privacy masks are configured in this section. There are four regions available. Each may be used either as a Privacy mask or an OSD text.
2-50 Para meters Description Enable Check this box to enable each OSD / Privacy mask region OSD / Privacy mask Each region can be in one of two types. OSD (On Screen Display) or Privacy mask Color (Privacy mask) This determines the color of the Privacy Mask Area.
2-51 2.3.6 System Click the [S y stem] item on the “Setup Page”. User Account Click the [User Account Setting] item to displa y the “User Account Setting Page”. Setup the account names and their respective passwords. There are 1 root (administrator) account and 10 common user accounts .
2-52 login this camera to view video without input account and password. But user will be required to input account and password if they want to change any setting Click the [Apply] button to confirm the settings or click the [Reset] button to re-enter the parameters.
2-53 Column Description System info It shows the firmware version, MAC address, production ID, and factory default type of IP device. WAN status It shows the WAN port’s IP address, netmask, gateway, DNS server, DDNS host and connection status. System log It shows the system event.
2-54 Firmware Upload Click the [Firmware Upload] item to display the “Firmware Upgrade Page”. Upgrade the IP device’s firmware through this page with the following instructions. Click [Apply] button. The ‘’Firmware Upgrade Page-2” will be displayed as below.
2-55 Once the process is finished, the progress bar will show the upgrading as OK, and reboot the IP device system. NOTE: If y ou cancel the firmware upg rade during upgrade process, the browser window w ill be closed Profile Upload Profiles are sets of parameters that control how the image sensor behaves.
2-56 STEP3 : Click the [Apply] button to start upgrading STEP5 : The upgrade process window shows a progress bar indicating upgrade status. STEP6: The system will reboot after profile upload. Save & Reboot This section tells you how to save all the settings and reboot this IP device.
2-57 APPEND IX 3.1 Specification 3.1.1 SIPMPH Cam era Series * Network Spec. Video Com pression Compres sion H.264 Baseline / M PEG-4 SP / M-JP EG Resolution SXGA (1280x10 24) at 18 fps HD720 (1280x72.
2-58 * Camera Spec . SIPMPBVFH Image Sensor 1/3" Micron Progressive Sc an CCD Effective Pixels 1280 x 1024 Electric Shutter 1/10 ~ 1/2,000sec ( 60Hz) 1/10 ~ 1/2,000sec ( 50Hz) Lens Varifocal Lens f=3 .3~12mm Min. scene Illum ination 0.5 Lux at F1.
2-59 SIPMPDVFH Image Sensor 1/3" Micron Progressive Sc an CCD Effective Pixels 1280 x 1024 Electric Shutter 1/10 ~ 1/2,000sec ( 60Hz) 1/10 ~ 1/2,000sec ( 50Hz) Lens Varifocal Lens f=3 .
2-60 20 0 N ew Highway A m i ty vil l e, N Y 11 70 1 63 1 - 95 7- 8 7 00 www . spec ot ec h. com Spec o T ec hnologies is cons t ant ly dev eloping produc t im prov em ent s . W e res erv e t he right t o modif y produc t des ign and s pec i f ic at i ons w it hout not ic e and w it hout inc urring any obligat ion.
Een belangrijk punt na aankoop van elk apparaat Speco Technologies SIPMPDVFH (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Speco Technologies SIPMPDVFH heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Speco Technologies SIPMPDVFH vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Speco Technologies SIPMPDVFH leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Speco Technologies SIPMPDVFH krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Speco Technologies SIPMPDVFH bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Speco Technologies SIPMPDVFH kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Speco Technologies SIPMPDVFH . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
