Gebruiksaanwijzing /service van het product PGWU-618 van de fabrikant Barco
Ga naar pagina of 55
Command C at alog 1011000110100100101100101001010101010010100101 1010011001010100100100100100111010100101000101 0110110001001010011001100101010010010010101010 10110001101001001011001010010101010010010.
Barc o nv Noordlaan 5, B-8 520 Kuurne Phone: +32 56.36.82.11 Fax: +32 56.36.883.86 Support: www.barco.com/esupport Visit us at the web: www.barco.com Printed in Belgium.
Copyright © All rights reserved. No part of this documen t may be copied, reproduced or translated. It shall not otherwi se be recorded, transmitted or stored in a ret rieval system without the pr ior written c onsent of Barco.
.
Tabl e of c ont ents T ABLE OF C ONTEN TS 1 . I n t r o d u c t i o n . .... ...... .... .... ...... .... .... .... ...... .... .... .... ...... .... .... .... ...... .... .... ...... .... .... .... 3 1.1 About this document ..........................
Tabl e of co nt ents 3.64 set display mode, write .................... ............... ...................... ....................... ............... ............... 3 9 3 . 6 5 s e t f o r m a t , w r i t e .................... ......................
1. Introdu ction 1. INTROD UCTION 1.1 About this document What is the purpose of this documen t? This document is applicable for the Barco device mentioned on the front page of this document and can thu s not be used on any other equipment. It explains how the c ommu nication wit h the device is accomplis hed.
1. Introduc tion 4 R5905746 COMMAND CATA LOG 06/01/2014.
2. The Barc o Projec tion Pro tocol 2. THE BARCO PROJECTION PROT OCOL Overview • T he Barc o Pro jectio n P rotoco l explain ed • Ethernet comm unication • RS232/RS422/USB -B communication • The c ommand representation in this manu al 2.
2. The Barc o Projec tion Pro tocol Character strings can be formatted in two ways: • C-style format An array of one or more characters which is terminated by a NULL character ( 0x00 ). The position of the NULL character determines the length of th e string.
2. The Barc o Projec tion Pro tocol Sending and receiving a c ommand A command which is sent to the device will consist of a request. A comm and which is received b y the client will consist of a response.
2. The Barc o Projec tion Pro tocol 2.2 Ethernet communication Introduction The communication follows a cli ent/server model where the device is t he server . T his means that the device responds on requests that are sent by a client. The dev ice will not send out messages on its own initiative.
2. The Barc o Projec tion Pro tocol T ypically , the following s trings will be returned: • hostname=value ; the hostname of the devi ce • ip-address=value ; the IP address of the device • mac-a.
2. The Barc o Projec tion Pro tocol RS232/422 input (Sub-D) port Pin Description 5 GND : Ground 6 DSR : Data Set Ready [RS232] RXD+ : Recei ved Data [RS422] 7 — (not conn ected) — 8 CTS : C lear T o Send 9 RI : Ring Indicator 2.
3. Commands 3. COMMANDS 3.1 decrement noise reduc tion, write About this command This command decrem ents the noise reduction by one. Request Pos Size Name Description Content 0 1 dec adj byte value known as "dec adj" 0x23 dec adj (h ex) 1 1 adj noise reduction 0x73 adj noise reduction (hex) 3.
3. Commands Pos Size Name Description Content BYTE1 (hex) BYTE2 (hex) BYTE3 (hex) BYTE4 (hex) BYTE5 (hex) 14-19 6 system FW version BYTE6 (hex) 0x00 HDMI (hex) 0x01 VGA (he x) 0x02 DVI (hex) 0x03 BNC .
3. Commands Pos Size Name Description Content 0x00 Off (hex) 43 1 rear projection mode status 0x01 On (hex) 0x00 Off (hex) 44 1 ceiling mode status 0x01 On (hex) 0x00 invalid (hex) 0x01 auto (hex) 0x02 RGB (hex) 45 1 format (color space) 0x03 YUV (hex) 3.
3. Commands 3.4 get aspect ra tio fi le, rea d About this command This command gets the aspect ratio fi le value. Request Pos Size Name Description Content 0 1 get adj byte value known as "get .
3. Commands Request Pos Size Name Description Content 0 1 get adj byte value known as "get adj" 0x21 get adj (hex) 1 1 adj auto p ower off 0xA6 adj auto p ower off (hex) Response Pos Size Na.
3. Commands 3.9 get brightness, read About this command This command gets the brightness value of the acti ve source. Request Pos Size Name Description Content 0 1 get adj byte value known as "ge.
3. Commands Pos Size Name Description Content 0x00 invalid (hex) 0x01 native (hex) 0x02 3200K (hex) 0x03 5400K (hex) 0x04 6500K (hex) 2 1 color temperature value 0x05 8800K (hex) 3.12 get color wheel inde x, read About this command This command gets the color wheel index.
3. Commands 3.14 get diagnostics info, read About this command This command gets the "diagnostics" info of the projector . Request Pos Size Name Description Content 0x2A 0x07 0-2 3 get diagn.
3. Commands Pos Size Name Description Content 1 1 adj dimm ing 0x0D adj dimming (h ex) 0x00 276.4W (hex) 0x01 300W (hex) 0x02 321W (hex) 0x03 343.1W (hex) 0x04 360W (hex) 0x05 378W (hex) 0x06 400W (hex) 0x07 420W (hex) 0x08 442W (hex) 2 1 dimming value la mp powe r (W att) 0x09 462W (hex) 3.
3. Commands Pos Size Name Description Content 0x00 invalid (hex) 0x01 auto (hex) 0x02 RGB (hex) 21 format (color space) 0x03 YUV (hex) 3.18 get gamma, read About this command This command gets the gamma value.
3. Commands Pos Size Name Description Content 0x00 HDMI (hex) 0x01 VGA (he x) 0x02 DVI (hex) 0x03 BNC (h ex) 0x04 CVBS (hex) 6 1 main s ource 0x1A invalid (hex) 3.20 get geometry adjust info, read About this command This command gets the "geometry adjust info" of the projector .
3. Commands Response Pos Size Name Description Content 0 1 get adj byte value known as "get adj" 0x21 get adj (hex) 1 1 get H start 0x11 get H start (hex) 2 1 H start value range 0->100 (OSD range 0 ->100) H start value (hex) 3.22 get high alti tude, read About this command This command ge ts the high altitude setting.
3. Commands Pos Size Name Description Content 0x00 fi lm (h e x) 0x01 video (hex) 0x02 graphics (hex) 9 1 gamm a value 0x03 standard (hex) 3.24 get input black bal ance, read About this command This command gets the input b lack balance value of the active source.
3. Commands 3.26 get input white ba lance, read About this command This command gets the input w hite balance value of the active source. This is applicable for the speci fi ed color .
3. Commands Request Pos Size Name Description Content 0x2A 0x06 0-2 3 get IP con fi gu ration inf o 0xA2 Response Pos Size Name Description Content 0x2A 0x06 0-2 3 get IP con fi gu ration inf o 0xA2.
3. Commands Pos Size Name Description Content 0x01 l a m p1( h e x ) 0x02 l a m p2( h e x ) 0x03 l a m p3( h e x ) 2 1 lamp num ber 0x04 l a m p4( h e x ) Response Pos Size Name Description Content 01.
3. Commands 3.31 get lamp runtime, read About this command This command ge ts the runtime of the lamp. Request Pos Size Name Description Content 01 l a m p 0x76 lamp (hex) 1 1 get lamp ru ntime 0x90 g.
3. Commands 3.33 get main zoom, read About this command This command gets the main zoom in/out. Request Pos Size Name Description Content 0 1 get m ain zoom 0xA1 get main zoom (hex) 1 1 get m ain zoom.
3. Commands Response Pos Size Name Description Content 0 1 get adj byte value known as "get adj" 0x21 get adj (hex) 1 1 adj no signal color 0x7B adj no signal color (hex) 0x01 logo (hex) 0x02 blue (hex) 0x03 black (hex) 2 1 value background color value 0x04 white (hex) 3.
3. Commands Request Pos Size Name Description Content 0 1 get PIP enable 0xA1 get PIP enable (hex) 1 1 get PIP enable 0x01 get PIP enable (hex) Response Pos Size Name Description Content 0 1 get PIP enable 0xA1 get PIP enable (hex) 1 1 get PIP enable 0x01 get PIP enable (hex) 0x00 Off (hex) 2 1 PIP enable value 0x01 On (hex) 3.
3. Commands Pos Size Name Description Content 0x00 HDMI (hex) 0x01 VGA (he x) 0x02 DVI (hex) 0x03 BNC (h ex) 2 1 PIP select value 0x04 CVBS (hex) 3.41 get PIP size, read About this command This command gets the PIP size.
3. Commands Request Pos Size Name Description Content 0 1 get resolution 0xF0 get resolution (hex) 1 1 get resolution 0x01 get resolution (hex) Response Pos Size Name Description Content 0 1 get resol.
3. Commands Pos Size Name Description Content BYTE1 (hex) BYTE2 (hex) BYTE3 (hex) BYTE4 (hex) BYTE5 (hex) BYTE6 (hex) BYTE7 (hex) BYTE8 (hex) BYTE9 (hex) 3-12 10 serial number BYTE 10 (h ex) 3.46 get sharpness, read About this command This command gets the sharpness value of the active sour ce.
3. Commands 3.48 g et V star t, r ead About this command This comm and gets the v ertical start pixel for the VGA and BN C inputs. Request Pos Size Name Description Content 0 1 get adj byte value know.
3. Commands Pos Size Name Description Content 0x00 PW392 (hex) 0x01 DDP442x (hex) 0x08 PIC (hex) 0x0C Lan module (hex) 0x10 Waveform (hex ) 2 1 to data index 0x14 EDID (hex) major version (MSB) (h ex).
3. Commands 3.52 reset se ttings to fact ory defaults , write About this command This command resets the settings t o factory def aults. Request Pos Size Name Description Content 0 1 factory defaults 0x31 factory default s (hex) 3.53 set aspect rat io fi le, write About this command This command s ets the aspect ratio fi le value.
3. Commands Pos Size Name Description Content 0x00 Off (hex) 21 auto pow er off status 0x01 On (hex) 3.56 set auto power on, write About this command This command s ets the auto power on m ode.
3. Commands Request Pos Size Name Description Content 0 1 set adj byte value known as "set adj" 0x20 set adj (hex) 1 1 adj ceiling 0xA3 adj ceiling (hex) 0x00 Off (hex) 2 1 ceiling mode status 0x01 On (hex) 3.60 set color temperature , write About this command This command sets the color temperature of the acti ve source.
3. Commands 3.63 set dimming, write About this command This command sets the dimming value. Request Pos Size Name Description Content 0 1 set adj byte value known as "set adj" 0x20 set adj (hex) 1 1 adj dimm ing 0x0D adj dimming (h ex) 0x00 276.
3. Commands 3.66 set gamma, write About this command This command sets the gamm a value. Request Pos Size Name Description Content 0 1 set adj byte value known as "set adj" 0x20 set adj (hex) 1 1 adj gamma 0x70 adj gamma (hex) 0x00 fi lm (h e x) 0x01 video (hex) 0x02 graphics (hex) 2 1 gamm a value 0x03 standard (hex) 3.
3. Commands Pos Size Name Description Content 0x00 red (hex) 0x01 green (hex) 21 c o l o r color speci fi ca ti on 0x02 blue (hex) 3 1 balance value range 0->100 (OSD range 0 ->100) balance value (hex) 3.70 set input selecti on, write About this command This command s ets the input of the projector .
3. Commands Pos Size Name Description Content 0x00 none (hex) 0x01 white (hex) 1 1 internal pattern number 0x02 grid (hex) 3.73 set lens center , writ e About this command This command sets the lens t o the center . Request Pos Size Name Description Content 0 1 lens 0xF4 lens (hex) 1 1 set lens center 0x88 s et lens center (hex) 3.
3. Commands Request Pos Size Name Description Content 0 1 lens 0xF4 lens (hex) 1 1 set lens zoom 0x82 set lens zoom (hex) 0x00 zoom in (hex) 2 1 lens zoom value z oom direction 0x01 zoom out (hex) 3.77 set main zoom, write About this command This command sets the main zoom in/out.
3. Commands Pos Size Name Description Content 0x01 logo (hex) 0x02 blue (hex) 0x03 black (hex) 2 1 background color 0x04 white (hex) 3.80 set noise reduction, write About this command This command sets the noise reduction value of t he active source.
3. Commands Request Pos Size Name Description Content 0 1 set P IP position 0xA0 set PIP position (hex) 1 1 set P IP position 0x04 set PIP position (hex) 0x00 top left (hex) 0x01 top right (hex) 0x02 bottom left (hex) 2 1 PIP position value 0x03 bottom right (hex) 3.
3. Commands Pos Size Name Description Content 0x00 Off (hex) 11 power status 0x03 On (hex) 3.87 set rea r pro ject io n mod e, w rite About this command This command s ets the rear projection mode.
3. Commands Request Pos Size Name Description Content 0x2A 0x01 0-2 3 set TCP/IP 0xA3 fi rst octet (he x) second octet (hex) third octet (hex) 3-6 4 IP address fourth octet (hex) fi rst octet (he x).
3. Commands 3.93 set warp keyst one vertical , write About this command This command sets the war p keystone vertical value. Request Pos Size Name Description Content 0 1 set adj byte value known as &.
Index INDEX A About this doc ument 3 B Barco Pro jection Protocol 5 C Command representation 10 D decrement noise reduction 1 1 write 1 1 E Ethernet 8 G get about info 1 1 read 1 1 get advanced c ontr.
Index get ceiling mode 16 get color temperature 16 get color w heel index 17 get contrast 17 get diagnostics info 18 get dimming 18 get display mode 19 get format 19 get gamma 20 get general info 20 g.
Index set contrast 38 set dimming 39 set display m ode 39 set format 39 set gamma 40 set H start 4 0 set high altitude 40 set input black balance 40 set input selec tion 41 set input white balance 41 .
Een belangrijk punt na aankoop van elk apparaat Barco PGWU-618 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Barco PGWU-618 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Barco PGWU-618 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Barco PGWU-618 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Barco PGWU-618 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Barco PGWU-618 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Barco PGWU-618 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Barco PGWU-618 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
