Gebruiksaanwijzing /service van het product 9A10001300 CR-H250 van de fabrikant Teac
Ga naar pagina of 40
9A10001300 CR-H250 OWNER’S MANUAL CD/Receiver Micr o-System Z.
2 Contents Thanks you for choosing TEAC. Read this manual carefully to get the best performance from this unit. Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Compact Disc . . . . . . . . . . . . . . . . . . . . . . . . .
3 Compact Disc Discs which can be played on this unit: • Conventional audio CDs bearing the CD-DA logo on the label: • Properly finalized CD-R and CD-RW discs Note: < Depending on the quality of the disc and/or the condition of the recording, some CD-R/CD-RW discs may not be playable.
4 Connections SUBWOOFER SPEAKER A B LINE IN Speaker Connections Caution: < To avoid damaging the speakers by inputting a sudden high-level signal, be sure to switch the power off before connecting the speakers. < Check the impedance of your speakers.
5 REMOTE CONTROL C LINE OUT LINE IN R L R L Cassette Deck (R-H300mk @ ) MD, CD-R, etc. R L R L LINE OUT L R VCR, DVD, etc. F LINE OUT DIGITAL IN (OPTICAL) LINE IN E D AC Power Cord Plug this AC power cord into an AC wall socket.
6 Connecting Antennas (AM/FM) < If the AM loop antenna provided does not deliver sufficient reception (often due to being too far from the transmitter or in a concrete building, etc.
7 Connecting Antennas (DAB) DAB Indoor Antenna Connect the T-type DAB antenna to the DAB socket, extend the lead vertically and attach it to a window frame or wall with thumbtacks, or the like, where reception is best. < You can check the antenna adjustment or positioning for the best reception by viewing the signal strength on the display.
8 Names of Each Control 1 Q P O N M L K J I H G F B A D E C Remote Sensor When operating the remote control unit, point it towards the remote sensor. Display Disc tray OPEN/CLOSE ( L ), AUTO TUNING In CD mode, use this button to open and close the disc tray.
9 PAUSE ( J ), FUNCTION, FM MODE In CD mode, use this button to pause playback. In DAB mode, activates features such as station order, manual tune, DRC value, SW version indication, signal error rate. It is also possible to ‘tidy’ the station list to remove stations which are in the memory but have no service provided.
Names of Each Control 2 INFO, RDS In DAB mode, this button is used to change the text content on the second line of the display, to show DLS (Dynamic Label Segment, info text supplied by each radio st.
BAND In TUNER mode, use this button to select FM, AM or DAB. SKIP ( . / / ) In CD mode, use these buttons to skip tracks. PLAY ( y ) In CD mode, use this button to start playback. PAUSE ( J ) In CD mode, use this button to pause playback Input selector Use these buttons to select a sauce.
12 A B C How to select CD/TAPE Every time the CD/TAPE button is pressed, the mode is changed as follows: A Basic Operation How to select TUNER/AUX 1/2 Every time the TUNER/AUX 1/2 button is pressed, t.
Bass control This control is used for adjusting the level of the low frequency sound range. Treble control This control is used for adjusting the level of the high frequency sound range. Balance control This control is used for adjusting balance of the volume level between the left and right channels.
14 Listening to CDs Press the OPEN/CLOSE button ( L ). 2 Place a disc on a tray with the printed surface up. 3 Press the OPEN/CLOSE button ( L ) to close the tray. The total number of the tracks and total play time of the disc is displayed. 4 Press the G (PLAY) button.
15 To stop playback Press the H (STOP) button to stop playback. A A B C D To suspend playback temporarily (pause mode) Press the J (PAUSE) button. Playback stops at the current position. To resume playback, press the G (PLAY) button or J (PAUSE) button.
16 Programmed Playback Press the PROGRAM/MEMORY button in the stop mode. 1 Select the desired track by pressing the . or / (SKIP) button and press the PROGRAM/ MEMORY button to enter. 2 Repeat this step to store other tracks. < If you attempt to program more than 32 tracks, ‘FULL’ is displayed and no more can be programmed.
T o clear the program 1. In the stop mode, press the PROGRAM/MEMORY button. 2 . Hold down the CLEAR button for more than 2 seconds. < If the OPEN/CLOSE button is pressed, the programmed contents will also be cleared.
18 Repeat Playback Repeat All [Ra] All the tracks of the selected disc will be played repeatedly. Repeat A-B This function allows repeat playback of any desired portion of the disc. 1 . Designate the point at which repeat playback should start by pressing the A-B button.
19 Time Display Each time the TIME button is pressed during playback,the display changes as follows:. elapsed time of the current track remaining time of the current track remaining time of the disc Listening to the Exter nal Sources You can connect external sources such as VCR deck or TV to the AUX input jacks.
20 The following screen will display for 2 seconds. The unit will scan for broadcast services in the local area and add them to the channel list as they are found. The scan should take about 10 seconds. As channels are added to the channel list the number of channels found is displayed.
21 < To display the signal strength of a channel, press the ENTER button again. The signal strength is displayed. Press the ENTER button once again to cancel the signal strength display. < Channels are displayed in alphanumeric order in the channel list, with numbers coming first.
Using Function Control 1 In DAB mode, use Function Control to set system options. There are 6 options in the function control. Station order Signal error rate Preset tune Software version DRC value Manual tune Station order Use station order to set the order in which stations are listed.
Press the ENTER button. 5 Fav Station (Favourite station) As you tune in stations and listen to them the unit will memorize the top ten stations you listen to and list them at the top of the channel list. A Favourite station in the channel list has ‘ ’ displayed after the station name on the first line of the display.
24 Sw version (Software version) This option shows the version number of the installed software. This is for information only and no adjustment is available. While listening to a DAB broadcast press the FUNCTION/FM MODE button. Press the TUNING/PRESET/TIME button until ‘Sw version’ is displayed in the second line of the display.
25 DRC value This option sets the Dynamic Range Control (DRC) value to be applied to received broadcasts. DRC is used to reduce the range between high and low volumes of audio and is sometimes applied at the broadcast source.
26 Manual tune This option allows you to manually tune in a channel and view a continuously updated display of the strength of the signal. This may be useful when adjusting or positioning an antenna for better reception. While listening to a DAB broadcast press the FUNCTION/FM MODE button.
27 Changing Display Settings You can choose the type of information displayed in the second line of the display while listening to a DAB channel. Each time the INFO/RDS MODE button is pressed, the information is displayed as follows. Multiplex name This displays the name of the Mulitplex that is broadcasting the programme.
28 Listening to FM/AM Selecting stations which cannot be tuned automatically (Manual tune) Select ‘Manual tune’ in step . Repeatedly press the TUNING/PRESET/TIME button until the station you want to listen to is found. Or hold down the TUNING/PRESET/TIME button until the station you want to listen to is found and release the button.
FM or AM DAB ‘CH01’ or ‘01’ blinks on the display. 29 Preset T uning 1 You can store up to 30 FM, 30 AM and 10 DAB stations. Preset Manually (FM/AM/DAB) BAND TUNING/PRESET/TIME MEMORY Select DAB, AM or FM by pressing the BAND button. 1 Tune the station you would like to store.
30 Preset T uning 2 1 3 2 < Preset channels can also be selected by the PRESET CALL buttons or the numeric buttons of the remote control unit. < When using the remote control unit, you can skip step . 2 Select a preset channel. Press the TUNING/PRESET/TIME button repeatedly until the desired preset station is found.
31 RDS The Radio Data System(RDS) is a broadcasting service which allows stations to send additional information along with the regular radio programme signal. RDS works on the FM waveband in Europe only. Tune in an FM station (see steps to of page 28).
32 1 5 3 2 4 PTY Search You can search for stations by programme type. Select FM by pressing the BAND button. 1 Press the INFO/RDS MODEbutton for more than 3 second. 2 Select the desired PTY programme using the TUNING/PRESET/TIME buttons. 3 Select your desired one from among 31 kinds of PTY programmes.
NEWS : brief announcements, events, public opinion, reports, actual situations. AFFAIRS : a kind of suggestion including practical announcements other than news, documents, discussion, analysis and so on. INFO : daily information or reference such as weather forecast, consumer guide, medical assistance and so on.
34 Every time the TIME MODE button is pressed, the mode is changed as follows. < The unit uses the 24 hour ‘military’ clock. < When no action is taken for 1 minute, the time adjust mode will be cancelled. Press the TUNING/PRESET/TIME buttons to set the current hour.
35 TUNING/PRESET/TIME TIME MODE ENTER/SET Setting the Timer < Adjust the clock before setting the timer. < When no action is taken for 1 minute, the timer setting mode will be cancelled. Press the TIME MODE button repeatedly until ‘On time’ is displayed.
36 How to Reset the Settings to the Factory Defaults The unit will be turned on, and all the settings are reset to the default settings. If the power supply is interrupted for 14 days or longer, all the settings kept in memory (such as preset stations and timer settings) will be erased.
37 Specifications GENERAL Power Requirements . . . . . . . . . . 230 V AC, 50 Hz Power Consumption . . . . . . . . . . . . . . . . . . . 75 W (standby) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 W Dimension (W x H x D) . . . . . .215 x 110 x 359 mm Weight .
38 T roubleshooting Amplifier No power e Check the connection to the AC power supply. No sound from speakers. e Check the connection to the speakers. e Adjust the volume. e Select proper source. e Pull out the headphone plug from PHONES jack. e If muting is on, press the MUTING button.
39 CD Player Cannot play. e Load a disc with label side up. e If the disc is dirty, clean the surface of the disc. e A blank disc has been loaded. Load a prerecorded disc. e Unfinalized CD-R/CD-RW disc is not playable. Finalize the disc properly. Sound skips.
0704 . MA-0906A Z This appliance has a serial number located on the rear panel. Please record the model number and serial number and retain them for your records. Model number Serial number TEAC CORPORATION 3-7-3, Nakacho, Musashino-shi, Tokyo 180-8550, Japan Phone: (0422) 52-5081 TEAC AMERICA, INC.
Een belangrijk punt na aankoop van elk apparaat Teac 9A10001300 CR-H250 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Teac 9A10001300 CR-H250 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Teac 9A10001300 CR-H250 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Teac 9A10001300 CR-H250 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Teac 9A10001300 CR-H250 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Teac 9A10001300 CR-H250 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Teac 9A10001300 CR-H250 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Teac 9A10001300 CR-H250 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
