

INSTALLATIE GIDS GUIDE D’INSTALLATION RAPIDE SCHNELLINSTALLATIONSANWEISUNGEN
SNABB INSTALLATIONSVÄGLEDNING
GUIDE TIL HURTIG INSTALLATION
HURTIGVEILEDNING PIKA-ASENNUSOPAS MANUAL DE USUARIO MANUAL DO UTILIZADOR
!

FINLAND, SPAIN, ITALY, PORTUGAL,
GREECE, TURKEY
This product is in compliance with the essential requirements and other relevant provisions of the R&TTE directive 1999/5/EC.
GB The features described in this manual are published with reservation to modifications.
NL De in deze handleiding beschreven mogelijkheden worden gepubliceerd onder voorbehoud van wijzigingen.
F Les possibilités décrites dans ce manuel sont publiées sous réserve de modifications.
D Die in dieser Bedienungsanleitung umschriebenen Möglichkeiten, werden vorbehaltlich Änderungen publiziert.
ES Las características descritas en este manual pueden ser objeto de futuras modificaciones.
S Funktionerna i denna bruksanvisning publiceras med reservation för ändringar.
DK Vi forbeholder os retten til ændringer af de specifikationer, der er beskrevet i denne brugsanvisning.
N Funksjoner beskrevet i denne manualen kan endres uten nærmere informasjon.
SF Tässä ohjekirjassa julkaissut tiedot voivat muuttua ilman ennakkoilmoitusta.
P As características descritas neste manual são publicadas sob reserva de poderem ser modificadas.
This product is made by Topcom Belgium


3 2 1 DC12V
ON 10/100 AUTO-MDI/MDIX SWITCH
--> The power LED on the front panel will go ON when the power adapter is connected.
--> The DSL LED will go ON I when the ADSL link is established.
--> The LAN LED’s will indicate the connection status.
- The routers default IP address is: 192.168.1.1 - DHCP server is ON
If you do not wish to set a static IP address on your PC, you will need to configure your PC to accept the IP address that the router will provide.
reset · Remark





There are some tools which are great for finding out a computer’s IP configuration: MAC address and default gateway.
Inside the windows 95/98/ME Start button, select Run and type winipcfg. In the example below this computer has a IP address of 192.168.1.100 and the default gateway is 192.168.1.1. The default gateway should be the broadband router IP address. The MAC address in windows 95/98 is called the Adapter Address.


In the DOS command type IPCONFIG and press Enter. Your PC IP information will be displayed as shown below.

- IPCONFIG / RENEW will renew the IP address, gateway and DNS.
Click the right mouse key on your network adapter and select Status

The support screen will display the IP information.


When your PC has a valid IP address, you can access the router setup web page.
Open Internet Explorer or Netscape Navigater and goto address: 192.168.1.1

Now the login screen will appear.
--> Enter the username and password.

By default the username is admin and the password is password.
--> Click OK to proceed.
You will enter the router menu with all the available options:


--> Now click Login Settings in the Quick Start menu to enter the login screen:

--> Enter your Username and Password from your ISP. --> Please make sure that the connection protocol and VPI/VCI settings are correct.
! Please check the list below. If your ISP is not listed, please contact your ISP for details.

--> Click “connect”



--> click OK to continue.


!!! Remark !!! If the connection is not established because of wrong settings, next screen will appear.

--> click OK and enter your ISP settings again.
--> You can check your WAN IP address by clicking Overall Status in the Status menu:


--> click Wireless in the Configuration menu to enter the Wireless settings:

--> Click Apply to validate the entries.

--> Click Save Settings in the Configuration menu to save.

--> Click Save to save the settings into the flash memory of the router.
Advanced users can also enter the other settings of the ADSL router. (LAN & DHCP, Port Forwarding, DMZ, …. ). The full userguide is available on the Topcom Website. (Support – Userguides)
Please always click Apply to validate the changes below the screen and don’t forget to Save Changes!
When a new firmware is available, it will be published on the www.topcom.net website in the support – downloads section.
--> Please download the file to your computer. --> Go to Firmware Update in the Configuration screen.

--> Click Firmware Update to start the update procedure


--> Now Browse for the file you have downloaded from the Topcom website. --> Click Upload.


The Topcom units have a 24-month warranty period. The warranty period starts on the day the new unit is purchased. The warranty on batteries is limited to 6 months after purchase. Consumables or defects causing a negligible effect on operation or value of the equipment are not covered. The warranty has to be proven by presentation of the original purchase receipt, on which the date of purchase and the unit-model are indicated.
A faulty unit needs to be returned to a Topcom service centre including a valid purchase note. If the unit develops a fault during the warranty period, Topcom or its officially appointed service centre will repair any defects caused by material or manufacturing faults free of charge. Topcom will at its discretion fulfil its warranty obligations by either repairing or exchanging the faulty units or parts of the faulty units. In case of replacement, colour and model can be different from the original purchased unit. The initial purchase date shall determine the start of the warranty period. The warranty period is not extended if the unit is exchanged or repaired by Topcom or its appointed service centres.
Damage or defects caused by incorrect treatment or operation and damage resulting from use of non-original parts or accessories not recommended by Topcom are not covered by the warranty. Topcom cordless phones are designed to work with rechargeable batteries only. The damage caused by the use of non-rechargeable batteries is not covered under warranty. The warranty does not cover damage caused by outside factors, such as lightning, water and fire, nor any damage caused during transportation. No warranty can be claimed if the serial number on the units has been changed, removed or rendered illegible. Any warranty claims will be invalid if the unit has been repaired, altered or modified by the buyer or by unqualified, non- officially appointed Topcom service centres.
The CE symbol indicates that the unit complies with the essential requirements of the R&TTE directive.

Topcom Draadloze Webr@cer 1104
16 Topcom Draadloze Webr@cer 1104
Eigenaren en ons team reageren doorgaans binnen een dag — en uw vraag helpt ook de volgende persoon.
Stel als eerste een vraag — andere eigenaren of ons team geven antwoord.