NL
Topcom logo
Officiële handleiding

Topcom 142

51 pagina's·471 KB·Telefoon·PDF·ENITJA
Topcom 142
Inhoudsopgave 14 secties 3 DISPLAY/LED · 3.1 Standard display information · 3.2 LED Indicators · LED Description · … TonenVerbergen
Page 1 of the Topcom 142 user manual
Pagina 1 · klik om te vergroten
Pagina 1

1 Installation 29 2 Buttons/LED 29 3 Display/LED 30 3.1 Standard display information 30 3.2 LED indicators 30 4 Operation 31 4.1 Setting the language of the display text 31 4.2 Setting the Date and Time 31 4.3 Setting the Dial Prefix 31 4.4 Telephone reset 31 5 Making a phone call 32 5.1 Last number redial 32 5.2 Deactivating the microphone (mute) 32 5.3 Ringer volume 32 5.4 Flash Key 32 5.5 Headset operations (optional) 32 6 Caller ID 33 6.1 General information 33 6.2 Call list 33 6.2.1 Scrolling through the Call List 33 6.2.2 Erasing numbers from the Call List 34 6.2.3 Calling a number from the Call List 34 6.3 Voice mail 34 6.4 E-mail notification 34 7 Phone Book 35 7.1 Use of the alphanumerical keypad 35 7.2 Adding a number to the Phone Book 36 7.3 Saving a number from the Call List in the Phone Book 36 7.4 Selecting and calling a number from the Phone Book by name 36 7.5 Changing a number and name from the Phone Book 36 7.6 Erasing a number and name from the Phone Book 36 8 Memory numbers 37 8.1 Programming Direct and Indirect memory numbers 37 8.2 Saving a number from the Call List as a Direct/Indirect Memory number 37 8.3 Calling a Direct/Indirect Memory number 37 8.4 Changing a number or name in the Direct/Indirect Memory 37 8.5 Erasing a number or name from the Direct/Indirect Memory 38 9 WARRANTY 38

28

Page 2 of the Topcom 142 user manual
Pagina 2 · klik om te vergroten
Pagina 2
Topcom 142 diagram (page 2)
Afb. 1
  • Connect one end of the line cord to the telephone line wall socket and the other end to the bottom of the phone.
  • Put batteries in the battery compartment to activate the display : - Open the battery compartment at the bottom of the unit. - Insert 4 AA batteries (1,5V). - Close the battery compartment. Instead of using batteries, you can also use an adapter (DC 9V / 300 mA ( )) (adapter not included).
Page 3 of the Topcom 142 user manual — 3.2 LED Indicators
Pagina 3 · klik om te vergroten
Pagina 3

3 DISPLAY/LED

3.1 Standard display information

Display information Description 12:15 Time indication (24h format) 09/12 Date indication (day/month)

You received new messages in the telephone

network mailbox 0123456789 Caller’s telephone number PETER JANSSEN Caller’s name NEW You received a new call 02 The number of the call in the Call list, when

shown together with ‘CALL#’ on the display

Repeated call counter, when shown together with

‘RPT’ on the display

The battery is almost empty

Phone Book entry indication

You received an email message

3.2 LED Indicators

LED Description

Handsfree or Semi-Handsfree ON

Blinks once = new call received in the Call list.

Blinks twice = new voice mail message received.

30

Page 4 of the Topcom 142 user manual — 4 OPERATION
Pagina 4 · klik om te vergroten
Pagina 4

4 OPERATION

  • 4.1 Setting the language of the display text You can select the desired language as follows:
  • Press and hold the Down button for 6 seconds until the default language is shown on the display.
  • Press the Up and Down buttons to select the language.
  • Press the Set button to confirm your setting and to go to the next setting (4.2 Setting the Date and Time) or press the Phone Book button to exit the menu.
  • 4.2 Setting the Date and Time When you have a subscription to the Caller ID service and your telephone provider sends the date and time together with the telephone number, the phone’s clock will be set automatically. It is also possible to set the clock manually:
  • After setting the language, you will enter the setting of the Date and Time.
  • Enter the day, the month and the time (24h format) by means of the alphanumerical buttons.
  • Press the Set button to confirm and to go the next setting (4.3. Setting the Dial Prefix) or press the Phone Book button to exit the menu.
  • 4.3. Setting the Dial Prefix When you dial out a telephone number from the Call list, the programmed prefix will be added in front of the telephone number. This function is usefull when you have a PABX where you have to dial a prefix to take the external line.
  • After setting the date and time, you will enter the setting of the Dial Prefix.
  • Enter the desired prefix by means of the numerical buttons (wrongly entered digits can be erased by means of the Erase button ).
  • Press the Set button to confirm and to go to the next setting (4.4.Telephone reset) or press the Phone Book button to exit the menu.
  • 4.4. Telephone reset If you want to bring the telephone back in its initial status, it is possible to reset the telephone. When you reset your telephone, all stored information will be lost.
  • After setting the Dial Prefix, you will enter the Reset setting.
  • Press the Erase button to confirm reset or press the Phone Book button to leave the menu.

31

Page 5 of the Topcom 142 user manual — 5 MAKING A PHONE CALL
Pagina 5 · klik om te vergroten
Pagina 5

5 MAKING A PHONE CALL

There are 2 ways to make a phone call : 1. Enter the telephone number. If needed, you can erase the last digits by pressing the Erase button . Pick up the handset or press the Handsfree button . After 3 seconds, the phone number will be dialled automatically. 2. Pick up the receiver or press the Handsfree button . Enter the telephone number.

5.1 Last number redial The Deskmaster 142 saves the 5 last dialled telephone numbers in the memory with indication of the call duration, the date and the time. Press the Redial button to scroll through the Redial memory. When the desired number appears on the display, there are two ways to call back : 1. Press the Call Back button . The unit will take the external line in handsfree mode and the desired number will be dialled automatically. 2. Pick up the receiver or press the Handsfree button . The number will be dialled automatically after 3 seconds.

The letter ‘P’ appears on the display on the location where you have added a pause of 3 sec.

5.2 Deactivating the microphone (mute) It is possible to deactivate the microphone during a conversation by pressing the Erase/Mute button . You can now talk freely without the caller hearing you. ‘MUTE’ appears on the display when the microphone is deactivated. Press the Erase/Mute button again if you want to resume your conversation.

5.3 Ringer volume When you receive a phone call, the unit will ring. The ring volume can be adjusted by means of the Ring Volume switch at the back of the phone (Hi- , Lo- , Off- ).

5.4 Flash Key Press the Flash button (R) to use certain services as ‘Call Waiting’ (if this service is provided by your telephone company); or to transfer phone calls when you are using a telephone exchange (PABX).

  • 5.5 Headset operations (optional) If the handset connection and switch are available at the back of the phone, you can choose whether you want to use a headset or the handsfree function.
  • When you use a headset, plug it into the headset connection and put the switch on . Press the Handsfree button to make a phone call.
  • When you use the handsfree function, put the switch on . Press the Handsfree button to make a phone call.

32

Page 6 of the Topcom 142 user manual — 09/12 12:15
Pagina 6 · klik om te vergroten
Pagina 6

6 CALLER ID

6.1 General information When you have a subscription to the Caller ID service from you telephone provider, the caller’s phone number will appear on the display. Depending on the telephone network, the caller’s name will also be shown on the display. If your telephone company doesn’t send the name, but you saved the telephone number with the name in the Phone Book or in the direct/indirect memory, the programmed name will be shown on the display (name tagging function).

During an incoming call, the following information can appear on the display:

NUMBER UNKNOWN You have a subscription to the Caller ID service but the caller’s number is not available (for ex. international calls).

NEW 09/12 12:15 CALL# 01 NUNBER UNKNOWN

NUMBER BLOCKED You have a subscription to the Caller ID service but the caller’s number is a private number.

NEW 09/12 12:15 CALL# 01 NUMBER BLOCKED

6.2 Call list The Deskmaster 142 has a Call List in which you can save at least 199 incoming telephone numbers with name. The phone numbers you have received more than once, will also be saved with indication of the repeat call counter (max 7). Every incoming number is saved in the Call List with indication of date and time.

In standby mode the number of new received and total calls is shown on the display, for ex. :

09/12 12:15

- 03- -10NEW TOTAL

  • NEW 03 - You received 3 new calls in the Call List.
  • TOTAL 10 - There are 10 calls in total in the Call List: 3 new and 7 old (already checked) calls.

6.2.1 Scrolling through the Call List You can scroll through the Call list by means of the Up and Down buttons . When you have reached the beginning/end of the list, “TOP/END” appears on the display. Every time a new call comes in, “NEW” is shown on the display. The number of the incoming call is shown under the indication “CALL#” on the display. The highest number is the last call received. Number 1 is the oldest call.

For example: When you have received 4 calls and you press the Down button , the last call will appear

on the display. If you press the Down button again, the next call will be shown.

33

Page 7 of the Topcom 142 user manual — 6 CALLER ID
Pagina 7 · klik om te vergroten
Pagina 7

Down button 1st press 2nd press 3rd press 4th press 5th press CALL# CALL# 4 CALL# 3 CALL# 2 CALL# 1 Display last call 2nd 3rd Oldest call TOP/END

  • 6.2.2 Erasing numbers from the Call List a) Erasing one number
  • Select the call you wish to erase by means of the Up and Down buttons .
  • Press the Erase button once. “CLEAR?” appears on the display.
  • Press the Erase button once again to confirm or press the Up or Down button to scroll through the rest of the Call List.
  • b) Erasing the entire Call List
  • Enter the Call List, press and hold the Erase button until “CLEAR ALL?“ appears on the display.
  • Press the Erase button once again to confirm or press the Up or Down button to scroll through the rest of the Call List.

before they can be erased!

  • 6.2.3 Calling a number from the Call List
  • Select the desired telephone number with the Up or Down button .
  • Press the Call Back button and the number will be dialled automatically in handsfree mode. Pick up the handset if you want to communicate over the handset.

6.3 Voice mail !!! This function only works if your telephone company sends the Voice Mail signals together with the Caller ID information !!!

When the Deskmaster 142 has received a voice mail message, the Voice Mail symbol appears on the display. As soon as you have listened to the messages in the mailbox, the symbol disappears.

6.4 E-mail notification !!! This function only works if your email service provider sends an email warning, by calling your number when there is a new email!!!

When you have received a new email message, your ISP will call your telephone using a special number. This call means you have received new email messages. If you program this number, with a special name, in the Phone Book, the Deskmaster 142 will recognize this number and will show the following symbol on the display:

34

Page 8 of the Topcom 142 user manual — 7 PHONE BOOK
Pagina 8 · klik om te vergroten
Pagina 8
  • To set the ISP notification number:
  • Press the Set button when the unit is in standby mode.
  • Enter the telelphone number from your ISP (the number that will call you when there is an email message).
  • Press the Set button again.
  • Press the numerical button ’0’ four times until ‘@’ appears on the display.
  • Press the Set button again to save the ISP phone number and the name ‘@’ in the Phone Book.

7 PHONE BOOK

You can store up to 99 names (max. 15 characters) and numbers (max. 22 digits) in the Phone Book of the Deskmaster 142.

7.1. Use of the alphanumerical keypad Use the alphanumerical keypad to enter text. To select a letter, press the corresponding button. For ex. if you press numerical button ‘5’, the first character (J) will be shown on the display. Press multiple times if you want to select another character under this button.

Press button ‘2’ twice to select the letter ‘B’. If you want to select ‘A’ as well as ‘B’, press button ‘2’ once to select ‘A’, wait for 2 seconds until the cursor has moved to the next location and press then button ‘2’ twice to select ‘B’. Wrongly entered characters can be erased by pressing the Erase button . You can move the cursor by pressing the Up and Down buttons . The character in front of the cursor will be erased.

Available Characters Press these buttons to get the following characters:

[ 1 ] S p a c e . 1 ? ! : , “ ’ ( ) [ 2 ] A B C 2 Ä Å À Á Â Æ @ ß Ç [ 3 ] D E F 3 Ë È É Ê [ 4 ] G H I 4 Ğ Ï Ì Í Î [ 5 ] J K L 5 [ 6 ] M N O 6 Ñ Ö Ò Ó Ô Ø [ 7 ] P Q R S 7 ß $ [ 8 ] T U V 8 Ü Ù Ú Û [ 9 ] W X Y Z 9 [ 0 ] 0 + - @ & / % $ £ [ * ] * [ # ] #

35

Page 9 of the Topcom 142 user manual — 7 PHONE BOOK
Pagina 9 · klik om te vergroten
Pagina 9
  • 7.2 Adding a number to the Phone Book
  • Press the Set button when the unit is in standby mode. “ENTER NUMBER” appears on the display.
  • Enter the desired telephone number and press the Set button .
  • Enter the name by means of the alphanumerical keypad and press the Set button to confirm.
  • 7.3 Saving a number from the Call list in the Phone Book
  • Select the desired call from the Call list with the Up and Down buttons .
  • Press the Set button . The number is shown on the display.
  • Modify the number if necessary or press the Set button to confirm. The name is shown on the display (if sent by the Caller-ID).
  • Modify or add the name if necessary and press the Set button to confirm. The number and name are saved in the Phone Book.
  • 7.4 Selecting and calling a number from the Phone Book by name
  • Press the Phone Book button .
  • Enter one or more characters of the desired name by means of the alphanumerical keypad.
  • Search for the name in the Phone Book by pressing the Up and Down buttons . The first name that begins with this charachter, appears on the display. When there is no name with this character available, the next name of the alphabetical list will be shown on the display.
  • Press the Up and Down buttons to search for a name.
  • When the desired name is shown on the display, pick up the handset and the number will be dialled automatically.
  • 7.5 Changing a number and name from the Phone Book
  • Select the desired number from the Phone Book by name as mentioned in 7.4.
  • Press the Set button . The number is shown on the display.
  • Change the number if necessary or press the Set button to confirm. The name appears on the display.
  • Change the name if necessary or press the Set button to confirm. The number and name are saved in the Phone Book.
  • 7.6 Erasing a number and name from the Phone Book
  • Select the desired number from the Phone Book by name as mentioned in 7.4.
  • Press the Erase button . “CLEAR?” appears on the display.
  • Press the Erase button again to confirm or another button to exit the menu.

36

Page 10 of the Topcom 142 user manual — 8 MEMORY NUMBERS
Pagina 10 · klik om te vergroten
Pagina 10

8 MEMORY NUMBERS

You can program 3 Direct (M1-M2 and Voice Mail) and 10 Indirect (0-9) memory numbers (number: max 22 digits, name: max. 15 characters). These memory numbers can be dialled : by pressing M1, M2, or VM (one button) or the Memory button + 0…9 (two buttons). Under the Voice Mail button VM you can program the Voice Mail number. If you press this button, the unit goes to handsfree mode and the Voice Mail number will be dialled automatically.

  • 8.1 Programming Direct and Indirect memory numbers
  • Press the Set button in standby mode. “ENTER NUMBER” appears on the display.
  • Enter the desired telephone number and press the Set button to confirm.
  • Enter the desired name.
  • Press the Direct Memory button (M1-M2-VM) to save it in the direct memory; or press the Memory button , followed by the Indirect Memory number (0-9) to save it in the indirect memory.
  • 8.2 Saving a number from the Call List as a Direct/Indirect Memory number
  • Select the desired call with the Up or Down button .
  • Press the Set button . The number is shown on the display.
  • Change the number if necessary or press the Set button to confirm. The name appears on the display if it was sent together with the number.
  • Change the name if necessary.
  • Press the desired Direct Memory button (M1-M2-VM) if you wish to save the number in the direct memory; or press the Memory button , followed by the Indirect Memory number (0-9) if you prefer to save the number in the indirect memory.
  • 8.3 Calling a Direct /Indirect Memory number
  • Press the desired Direct Memory button (M1-M2-VM) or press the Memory button followed by the Indirect Memory number (0-9) to call a number.
  • Pick up the handset or press the Handsfree button and the number will be dialled automatically.
  • 8.4 Changing a number or name in the Direct/Indirect Memory
  • Select the desired telephone number in the Direct/Indirect Memory.
  • Press the Set button . The desired number appears on the display.
  • Change the number if necessary or press the Set button to confirm. The name appears on the display.
  • Change the name if necessary.
  • Press the desired Direct Memory button (M1-M2-VM) if you wish to save the number in the direct memory; or press the Memory button , followed by the Indirect Memory number (0-9) if you prefer to save the number in the indirect memory.

37

37

Page 11 of the Topcom 142 user manual — 9 WARRANTY
Pagina 11 · klik om te vergroten
Pagina 11

8.5 Erasing a number or name from the Direct/Indirect Memory a) Erasing a direct memory number (M1-M2-VM)

Press the Set button followed by the desired Memory button M1, M2 or VM. b) Erasing an indirect memory number (0-9)

Press the Set button followed by the Memory button and the corresponding memory number 0-9.

9 WARRANTY

Warranty: 1 year on defects of the phone. Attention: Return your phone in the original packaging. Do not forget to include your purchase invoice. The warranty is not valid without the purchase invoice.

38

Vraag stellen over de Topcom 142

Eigenaren en ons team reageren doorgaans binnen een dag — en uw vraag helpt ook de volgende persoon.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
Nog geen vragen over de Topcom 142

Stel als eerste een vraag — andere eigenaren of ons team geven antwoord.

Origineel document

Topcom 142 handleiding-pdf

51 pagina's·471 KB·Telefoon·PDF
Klik op een bovenstaande pagina om deze hier te openen
Pagina 1 / …
100%
Pagina's laden…