

GUIDE D’INSTALLATION RAPIDE INSTALLATIONSKURZANLEITUNG
GUÍA DE INSTALACIÓN RÁPIDA
GUIA DE INSTALAÇÃO RÁPIDA KORTFATTAD INSTALLATIONSHANDLEDNING
HURTIG INSTALLATIONSGUIDE
HURTIGINSTALLASJON
PIKA-ASENNUSOPAS

This product is in compliance with the essential requirements and other relevant provisions of the R&TTE directive 1999/5/EC.
For use in:
Belgium, Holland, Germany, Sweden, Denmark, Norway, Finland, Spain, Italy, Portugal, Greece, Turkey

SECURITY WARNING To avoid that uninvited users will access your wireless network it is strongly
recommended to activate WEP (or WPA if available) encryption of your wireless network.

Before installation, please check your system and ensure it meets the minimum requirements:
- CD rom drive
- Free USB port
The CE symbol indicates that the unit complies with the essential requirements of the R&TTE directive.
This product is in compliance with the essential requirements and other relevant provisions of the R&TTE directive 1999/5/EC.










After installation of the driver and utility, you will have new icon in the Windows system tray.
For Windows 98Se , Me and 2000: double click the skyracer wireless USB icon : to open the configuration tool.



For Windows XP: this operating system has its own wireless LAN tool build in. To open the WLAN configuration, double click the wireless network icon in the system tray.

This will open the configuration tool:

Select the wireless available WLAN network and click ‘Connect’. Or select ‘Advanced…’ for more settings.


Click ‘Refresh’ to search available WLAN networks. Select WLAN network and click ‘Configure” to activate WEP and enter WEP key of the wireless network you want to connect.


You can only have data communication between the WLAN network and the PC with the wireless USB stick if the TCP/IP settings are set properly. Please ask your network administrator for TCP/IP setting : IP address = fixed or received automatically from the DHCP server, subnetmask , gateway and DNS.
Click with the right mouse button on ‘my network places’ icon and select properties. Click right mouse button on the wireless LAN network connection and click ‘properties’.


Select ‘TCP/IP settings’ and click ‘properties”.
Fill in according to your WLAN network settings the IP address or select ‘obtain an IP automatically’ and DNS settings. Click OK and exit the wireless network settings.
Now it should be possible to connect and transfer data with the WLAN network.
Note : The first time you connect to the WLAN network it can be necessary to ‘renew’ the IP address if the network provides the IP address automatically. This can be done in Windows 98 SE and Me : Select ‘Start’ / ‘run’ and enter ‘winipcfg’ select the correct network card (if you have more then 1) and click ‘Renew’. For windows 2000 and XP : select ‘start’ / ‘run’ and type ‘cmd’ and press enter. Type ‘ipconfig /renew’ and press enter. The PC will now receive a new IP address from the DHCP server.

Eigenaren en ons team reageren doorgaans binnen een dag — en uw vraag helpt ook de volgende persoon.
Stel als eerste een vraag — andere eigenaren of ons team geven antwoord.