Gebruiksaanwijzing /service van het product camera control unit van de fabrikant Toshiba
Ga naar pagina of 37
CAMERA CONTROL UNIT IK-HD2C INSTRUCTION MANUAL FCC NO TICE This equipment has been tested and f ound to comply with the limits for a Class A digital de vice, pursu- ant to P ar t 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial en vironment.
2 SAFETY PRECAUTIONS Safety icon s This manual contains safety instructions that must be observed in order to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data.
3 Di s claimer W e disclaim any responsibility and shall be held harmless for an y damages or losses incurred by the The following description is described the state that the suitable camera head is connected to this camera control unit. user in any of the f ollowing cases: 1.
4 1 CAUTIONS ON USE AND INSTALLATION ............................................ 2 COMPONENTS ....................................................................................... 3 ITEMS CONTROLLED BY THE ON SCREEN DISPLAY ........................
5 (6) SYNC ........................................................................................................................... (6.1) INT screen ...................................................................................................
6 1 Camera Control Unit ............................................................................................... 1 2 Accessories a Instruction manual ........................................................................................ 1 2. COMPONENTS 1.
7 3 ITEMS CONTROLLED BY THE ON SCREEN DISPL A Y 㻬㼗㼈㼐 㻤㼙㼄㼌㼏㼄㼅㼏㼈㻃㼖㼈㼏㼈㼆㼗㼌㼒㼑㼖 㻳㼕㼈㼖㼈㼗㻃㼙㼄㼏㼘㼈 㻋㻩㼄㼆㼗㼒㼕㼜㻃㼖㼈㼗㼗.
8 3 4 2 1 12 3 45 8 79 6 60I Camera cable for “IK-HD1H” terminal POWER switch POWER LED FILE button GAIN button DISP button P AGE button MENU UP (SHD) button MENU DOWN (SHD) button D ATA U P (A WB) button DA T A DOWN (A BB) button DC IN 12V terminal REMOTE terminal Y/G terminal P B /B terminal P R /R terminal EXT.
9 䐡 DC IN 12V terminal Accept a DC power input (12V). 䐢 Y/G terminal Outputs Y or G. (BNC connector) 䐣 P B /B terminal Outputs P B or B. (BNC connector) 䐤 P R /R terminal Outputs P R or R. (BNC connector) 䐥 REMOTE terminal To connect to a RS-232C device for remote control function.
10 DC IN 12V 1 +12V 2 +12V 3 GND 4 GND REMOTE 1 2 3 4 5 6 7 8 9 NC NC NC NC GND NC RXD TXD NC 5 4 A Connector Pin A ssignments 䝿 Only use optional camera head model # IK-HD1H with this ca mera controller. The use of another head m ay cause damage to the control unit and camera head.
11 䐖 Ref er to the item “5. CONNECT ION”, connect the equipment correctly. A camera head "IK-HD1H" needs to be connected to this camera control unit from this section on.
12 AT W A utomatic Tracking White Balance 䟻 䟻 䟻 䟻 AW B 䟺 䟺 䟺 䟺䟺 䟺 䟺 䟺 A utomatic White Balance 䟻 䟻 䟻 䟻 MA NUA L 䟺 䟺 䟺 䟺 Manual White Balance 䟻 䟻 䟻 䟻 Outline The camera m easures the object color tem perature and adjusts the white balance automatically.
13 Meaning Display A WB OK Automatic white balance adjustm ent finished correctly. A WB NG LEVEL LOW Automatic white ba lance adjust m ent cannot be performed because the video level is too low. Adjust the video level by increasing the illumination or opening the lens iris.
14 .:*7(*3*+.1*7&6*&:&.1&'1*&797*62*246.*7+468-.793.8-*7*&6*(-47*3)*5*3).3, 437-448.3,(43).8.437=97.3,8-*$%'988438-*(&2*6&45*6&8.
15 Due to the lens used or the environmental condition, color shading may occur at the upper and lower edge of the screen. If this happens, the shading correction function can be used to decrease the amount of color shading.
16 Various settings can be controlled on the unit by using the on screen m enu displayed on the m onitor. The contents once set are memorized in the scene files (A, B, C, D, E) selected, so if the power turns off, it is unnecessary to set again when using the unit n ext ti me.
17 䝿 Select the m enu to change the setting by referring to the item “7.1 Using the Menus”. 䝿 When the [MENU UP], [M ENU DO W N] buttons are pushed, the “ 䊲 ” on the screen moves up and do wn. Move the “ 䊲 ” to the item whose setting you wish to change.
18 䟺 䟺 䟺 䟺 1 䠀 䠀 䠀 䠀 1 䟻 䟻 䟻 䟻 Changing the setting in AUTO mode Shutter mode AUTO, MANUAL, SS Video level adjustment -100 to 100 Peak and average ratio adjustment 00 10 to 10 .
19 (d) Changing the automatic shutter zone area The available picture area is shown by the shading correction on the screen that is parted in 64. 䐖 Move the “ 䊲 ” to AREA by pushing [MENU UP], [MENU DOW N] buttons. 䐗 Select the measurem ent light area by pushing [DATA UP], [DAT A DOW N] buttons.
20 䟺 䟺 䟺 䟺 1 䠀 䠀 䠀 䠀 2 䟻 䟻 䟻 䟻 Changing the setting in MANUAL mode Shutter mode AUTO, MANUAL, SS -- 1 SHUTTER -- <FILE A> Shutter speed setting MODE MANUAL OFF, 1/100s, 1.
21 2 GA IN (Video gain) GAIN has three modes; AUT O, MANUAL, OFF. Move the “ ” to MODE, push the [DATA UP], [DATA DOWN], and select one of the three modes : AUTO, MANUAL, OFF.
22 䟺 䟺 䟺 䟺 3 䟻 䟻 䟻 䟻 WHT BAL(White Balance) The W H T BAL has three m odes; AW B, ATW , MANUAL. Move the “ ” to MODE, push the [DATA UP], [DATA DOWN], and select one of the three modes : AWB, ATW, MANUAL.
23 䟺 䟺 䟺 䟺 3 䠀 䠀 䠀 䠀 2 䟻 䟻 䟻 䟻 Changing the setting in ATW(Automatic Tracking White balance) mode White balance mode AWB, ATW, MANUAL -- 3 WHT BAL -- <FILE A> R PAINT adj.
24 䟺 䟺 䟺 䟺 3 䠀 䠀 䠀 䠀 3 䟻 䟻 䟻 䟻 Changing gain in MANUA L mode White balance mode AWB, ATW, MANUAL Red gain adjustment -100 to 100 -- 3 WHT BAL -- <FILE A> Blue gain adjust.
25 䟺 䟺 䟺 䟺 4 䟻 䟻 䟻 䟻 PROCESS Gamma correction ON, OFF Gamma correction level setting -10 to 10 -- 4 PROCESS -- <FILE A> GAMMA ON/OFF ON GAMMA 0 Detail gain setting -7 to 7 DTL GA.
26 䟺 䟺 䟺 䟺 4 䠀 䠀 䠀 䠀 4 䟻 䟻 䟻 䟻 Changing detail (outline) gain 䐖 !' % ) 䊲 * %! ( "&$.
27 䟺 䟺 䟺 䟺 5 䟻 䟻 䟻 䟻 MA TRIX(Matrix color correction) Matrix color correction ON, OFF Red hue setting -- 5 MATRIX -- <FILE A> Yellow hue setting Red gain setting MATRIX ON Yellow.
28 䟺 䟺 䟺 䟺 6 䟻 䟻 䟻 䟻 SYNC W hen an external sync signal is input, the displa y changes from INT (internal sy nc) to EXT .( external sync) automatically. I N T E X T 䟺 䟺 䟺 䟺 6 䠀 䠀 䠀 䠀 1 䟻 䟻 䟻 䟻 INT screen -- 6 SYNC -- <FILE A> MODE INT 䟺 䟺 䟺 䟺 6 䠀 䠀 䠀 䠀 2 䟻 䟻 䟻 䟻 Changing EXT.
29 䟺 䟺 䟺 䟺 7 䟻 䟻 䟻 䟻 OPTION OUTPUT Y/P b /P r , RGB SHADING MODE SET, MANUAL, OFF -- 7 OPTION -- <FILE A> RS232C baud rate 9600bps, 19200bps OUTPUT Y/P b /P r OSD OUTPUT ALL ON, .
30 䟺 䟺 䟺 䟺 7 䠀 䠀 䠀 䠀 5 䟻 䟻 䟻 䟻 Changing detail signal output 䐖 ( ( , 䊲 - ($ + %)' !# .
31 䠄 䠄 䠄 䠄 8 䠅 䠅 䠅 䠅 Setting USER area 䐠 Move the 㼏㼡㼞㼟㼛㼞 (blinking) to the zone to be appeared. 䡡 When USER is selected for the AREA of the automatic shutter or for AWB, the light measurement zones can be changed.
32 W hen using the unit with an external sync signal to EXT . SYNC term inal on t he rear panel. W hen the externa l sync signal is input, the cam era automatically switches its sy nc f rom the internal sync to the external sync.
33 Items to be checked Symptom No picture 䡗 Is power supplied correctly ? 䡗 Is the lens iris adjusted correctl y? 䡗 Is the power switch on, and the power LED illuminated? 䡗 Are the camera and .
34 Power supply 12V DC 㼳 10% Power consumption Approx. 10.3 W (Including a camera head, when the DC power supply is 12V) Image-acquisition method RGB, 3CCD, Micro prism system Image sensor 1/3 inch, IT 䟿 CCD Output pixels Horiz ontal : 1920, Vertical : 1080 Scanning system 2 䠌 1 interlace Scan frequency [59.
35 Unit : mm [inch] 10. EXTERNA L APPEA RANCE DIA GRAM 㻗㻗㻑㻙㻃㻾㻔㻑㻚㻙㼀 㻗㻓㻃㻾㻔㻑㻘㻛㼀 㻔㻛㻙㻃㻾㻚㻑㻖㻕㼀 㻔㻔㻓㻃㻾㻗㻑㻖㻖㼀 㻔㻛㻑㻛㻖 㻾.
36 M emo.
Limited Warranty – T OSHIBA Camera Control Unit The Imaging Systems Division of Toshiba America Information Systems, Inc. ("ISD") makes the following limited warranty with regard to this Camera Control Unit ("Product"). These limited w arranties apply to the Original End-User ("Y ou").
Een belangrijk punt na aankoop van elk apparaat Toshiba camera control unit (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Toshiba camera control unit heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Toshiba camera control unit vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Toshiba camera control unit leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Toshiba camera control unit krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Toshiba camera control unit bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Toshiba camera control unit kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Toshiba camera control unit . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
