Gebruiksaanwijzing /service van het product EM1-31076 van de fabrikant Toshiba
Ga naar pagina of 92
TEC Electronic Computing Scale SL-9000/9000N-FFH-US/CA/QR Owner ’ s Manual.
.
TABLE OF CONTENTS Page 1. INTRODUCTION ..................................................................................................... 1- 1 1.1 APPLICABLE MODEL ................................................................................... 1- 2 1.
Copyright 2001 by TOSHIBA TEC CORPORATION All Rights Reserved 570 Ohito, Ohito-cho, Tagata-gun, Sizuoka-ken, JAPAN Page 11. PROGRAMMED DATA VERIFICATION REPORTS ................................................. 11- 1 12. PASSWORD SECURITY ........
.
1. INTRODUCTION 1. INTRODUCTION 1- 1 1. INTRODUCTION Thank you for purchasing the TEC SL-9000 electronic computing scale. The TEC SL-9000 is designed to be hung from the ceiling. As you will discover, it has many features and functions designed for user friendliness as well as complete customer satisfaction.
1. INTRODUCTION 1.1 APPLICABLE MODEL 1- 2 Max. Capacity 30M: 30 lbs (decimal pound /multi-inter val) 15M: 15 Kg (multi-interval) 1.1 APPLICABLE MODEL • SL-9000-15M-FFH-CA • SL-9000-30M-N-FFH-US • SL-9000-15M-FFH-QR • SL-9000-15M-N-FFH-CA • SL-9000-15M-N-FFH-QR The description of the model number is as follows.
2. SPECIFICATION 2.1 SCALE 2- 1 2. SPECIFICATION 2.1 SCALE Item US CA QR Maximum Capacity 30 lb 15 Kg (30 lb) Minimum Scale Division 0.005 lb (0 to 15 lb.) 0.01 lb (15 to 30 lb.) 0.002 Kg (0 to 6 Kg) 0.005 Kg (6 to 15 Kg) 0.005 lb (0 to 15 lb) 0.01 lb (15 to 30 lb) Display Range 0 to 30.
2. SPECIFICATION 2.2 OPTION 2- 2 2.2 OPTION Option Name Model No. or Part No. Description Source LON Connector TM8P-88P Part No. EAJ-0028001 A modular connector used to connect scales to each other in a LON configuration. See Note 2 LON Terminal Resistor 285D-8P Part No.
3. APPEARANCE 3. APPEARANCE 3- 1 3. APPEARANCE NOTE : To set the speed/operation key sheet, open the keyboard frame and insert t he two tabs of the key sheet into the two slots of the keyboard frame bottom.
4. DISPLAY 4.1 US TYPE 4- 1 4. DISPLAY 4.1 US TYPE n Front Display Panel n Rear Display Panel SL-9000N CAPACITY SCROLLING MESSAGE INDICATES SCALE AT ZERO x o WEIGHT e=d 0 ∼ 15 lb 0.005 lb 15 ∼ 30 lb 0.01 lb SL-9000N CAPACITY SCROLLING MESSAGE INDICATES SCALE AT ZERO WEIGHT e=d 0 ∼ 15 lb 0.
4. DISPLAY 4.2 CA/QP TYPE 4- 2 4.2 CA/QR TYPE n Front Display Panel n Rear Display Panel SL-9000N CAPACITY x o WEIGHT e=d WEIGHT e=d 0 ∼ 6 kg 0.002 kg 0 ∼ 15 lbs 0.005 lbs 6 ∼ 15 kg 0.005 kg 15 ∼ 30 lbs 0.01 lbs SL-9000N CAPACITY WEIGHT e=d WEIGHT e=d 0 ∼ 6 kg 0.
5. KEY LAYOUT 5.1 PROGRAMMING KEYBOARD 5- 1 5. KEY LAYOUT 5.1 PROGRAMMING KEYBOARD NOTE: Blank keys have no function. ■ Programming Keyboard Function Name of Key Function 1. Clears numeric data just entered. 2. Releases the scale from the error mode.
5. KEY LAYOUT 5.1 PROGRAMMING KEYBOARD 5- 2 Name of Key Function 1. Displays the preceding PLU data. 2. Used t o set an auto code. 3. Calls the preceding label format # when setting the print position. Moves the cursor to left. Moves the cursor to right.
5. KEY LAYOUT 5.2 OPERATION KEYBOARD AND SPEED KEYBORAD 5- 3 5.2 OPERATION KEYBOARD AND SPEED KEYBOARD ■ Operation Keyboard Function Name of Key Function to Enters PLU #, unit price and tare. 1. Clears numeric entries. 2. Releases the scale from error mode.
5. KEY LAYOUT 5.2 OPERATION KEYBOARD AND SPEED KEYBORAD 5- 4 ■ Operation Keyboard Function Name of Key Function Corrects data just after the registration. 1. Selects the speed key page. 2. Selects the function for change Print/OFF. Returns to the main menu.
6. PROCEDURE BEFORE OPERATION 6. PROCEDURE BEFORE OPERATION 6- 1 6. PROCEDURE BEFORE OPERATION 1. Ask an authorized installing dealer for the scale installation. Please contact your nearest TOSHIBA TEC representative. 2. Hang the platter arm from the scale.
7. INSTALLATION PROCEDURE 7. INSTALLATION PROCEDURE 7- 1 7. INSTALLATION PROCEDURE ■ Scale installation on the wall or ceiling The installation should be an authorized installing dealer. Please contect your nearest TOSHIBA TEC representative. ■ Platter 1.
8. REMOVAL AND REPLACEMENT OF RECEIPT/LABEL 8. REMOVAL AND REPLACEMENT OF RECEIPT/LABEL 8- 1 8. REMOVAL AND REPLACEMENT OF RECEIPT/LABEL 1. Open the printer cover and turn the head-up lever to the anticlockwise. 2. Pull o ut the roll stopper and backing paper stopper, then remove the receipt/label core with the backing paper.
8. REMOVAL AND REPLACEMENT OF RECEIPT/LABEL 8. REMOVAL AND REPLACEMENT OF RECEIPT/LABEL 8- 2 4. Insert the tip of the receipt/label into the print head. 5. Align the two media guides with the right edge of the receipt/label. 6. Thread the receipt/label as shown below.
9 . OUTLINE OF OPERATION 9. OUTLINE OF OPERATION 9- 1 9. OUTLINE OF OPERATION Main Power Switch ON Display OFF Press the key POWER Scanning Display Press the key POWER ① REG Menu REWRAP Menu MARK DO.
10. PROGRAMMING PROCEDURES ■ How to access to Programming Menu 10- 1 10. PROGRAMMING PROCEDURES ■ How to access to Programming Menu Password Enter the Password ∼ Programming starts Programming completes unnecessary Enter a menu number Select an item No.
10. PROGRAMMING PROCEDURES ■ Title and Contents of Programming Menu 10- 2 ■ Title and Contents of Programming Menu Table 1. NO. TITLE MENU PAGE ITEM NO.
10. PROGRAMMING PROCEDURES ■ How to enter characters 10- 3 ■ How to enter characters Use the following procedure to enter a commodity name, address and ingredient message. Example) 1st line: TEC STORE 2nd line: (TEL) 0123-45-6789 1 st line content 2 nd line content NOTES: 1.
10. PROGRA MMING PROCEDURES 10.1 PLU DATA EDIT 10- 4 10.1 PLU DATA EDIT Menu Page: 1 Item No.: 0 In this procedure, use operation keys (except when calling a PLU by using a speed key). The unit price stored in a PLU can be changed with this menu. NOTES: 1.
10. PROGRAMMING PROCEDURES 10.2 PLU DATA SETTING 10- 5 10.2 PLU DATA SETTING Menu Page: 1 Item No.: 1 Setting or changing the contents of PLU (PLU#, UPC#, Commodity Name, etc). b Enter PLU# (max. 6 dig.) Enter UPC# (Max. 6 dig.) Enter commodity name. (max.
10. PROGRAMMING PROCEDURES 10.2 PLU DATA SETTING 10- 6 NOTES: 1. A UPC code is made up of a combination of an entered code and an AUTO CODE. Be sure to attach some characters to the end of the AUTO CODE, or all entered codes will be ignored and an AUTO CODE will become an UPC code (see ex.
10. PROGRAMMING PROCEDURES 10.3 INGREDIENT MESSAGE 10- 7 10.3 INGREDIENT MESSAGE Menu Page: 1 Item No.: 2 Ingredient messages can be printed on a label with a maximum of 54 characters per line using small letters or 32 characters per line using boldfaced small letters.
10. PROGRAMMING PROCEDURES 10.4 NUTRITION SETTING 10- 8 10.4 NUTRITION SETTING Menu Page: 1 Item No.: 3 Using the following procedure, nutrition information and caloric intake can be set. Serving Size and Servings Per Container consist of a maximum of a 18 characters.
10. PROGRAMMING PROCEDURES 10.4 NUTRITION SETTING 10- 9 Additional Information Area 2 to 6. (0 to 99999 or 0.0 to 999.9) Enter the vitamin A. (0 to 999) Enter the Vitamin C. (0 to 999) Enter the Calcium. (0 to 999) Enter the Iron. (0 to 999) Additional Information Area 7 to 12 (0 to 999) e f ENTER ENTER ENTER ENTER ENTER ENTER PROG.
10. PROGRAMMING PROCEDURES 10.4 NUTRITION SETTING 10- 10 ● Set the Daily Value Table NOTES: 1. DAILY VALUE (Max. 8 digits) 1) The contents of Daily value 2) The necessary daily intake of calories can be changed by changing the above table data, and percentage will be changed accordingly.
10. PROGRAMMING PROCEDURES 10.4 NUTRITION SETTING 10- 11 ● Deleting Nutrition Data ● Memory file sort The memory file is sorted when a memory full error occurs.
10. PROGRAMMING PROCEDURES 10.5 PLU VERIFYING LABEL 10- 12 10.5 PLU VERIFYING LABEL Menu Page: 1 Item No.: 4 Verifies PLU data stored in the scale. NOTES: 1. Labels are printed in both batch mode and on-demand mode. 2. When no PLU is stored in the selected range, an error occurs when the key is pressed.
10. PROGRAMMING PROCEDURES 10.6 ADDRESS AND COMMERCIAL MESSAGE SETTING 10- 13 10.6 ADDRESS AND COMMERCIAL MESSAGE SETTING Menu Page: 1 Item No.: 5 A store address printed on label and a commercial message shown on the display can be set within the following character limits using the procedure below.
10. PROGRAMMING PROCEDURES 10.7 COMBINATION MESSAGE 10- 14 10.7 COMBINATI ON MESSAGE Menu Page: 1 Item No.: 6 You can combine some messages set in Section 10.6 together and create a maximum of 24 different combination messages. NOTE: When the fixed message is selected, set “ 00 ” as the 1st and 2nd messages.
10. PROGRAMMING PROCEDURES 10.7 COMBINATION MESSAGE 10- 15 NOTE: T he scrolling up/down methods allow displaying 16 characters per line, up to a total of 90 characters per display. 3. Displa y method varies depending on message construction. 1) message combination a.
10. PROGRAMMING PROCEDURES 10.8 SPECIAL INFORMATION 10- 16 10.8 SPECIAL INFORMATION Menu Page: 1 Item No.: 7 When the Net Weight Statement label is selected, 3 lines (32 characters/line) of special information can be printed in the label position where the net weight data is to be printed.
10. PROGRAMMING PROCEDURES 10.10 SPEED KEY SETTING 10- 17 10.10 SPEED KEY SETTING Menu Page: 1 Item No.: 9 The SL-9000 has a maximum of 108 × 2 speed keys which are very convenient to call PLUs quickly.
10. PROGRAMMING PROCEDURES 10.11 PRINT FORMAT 10- 18 10.11 PRINT FORMAT Menu Page: 2 Item No.: 0 The SL-9000 can memorize 5 different print formats. After print formats are set, you can call them by pressing the print format number. 0 j <MENU> Page 2 PROG.
10. PROGRAMMING PROCEDURES 10.11 PRINT FORMAT 10- 19 ■ Table 2: Label Format Number Table S elect the format # for the label to be used by referring to the table below. Print format 48-mm wide label 57-mm wide label Format # Basic form Ingredient Commodity Length Nutri.
10. PROGRAMMING PROCEDURES 10.12 DATE/TIME SETTING 10- 20 NOTES: 1. The error mode can be released by pressing the key, and operated again through the above steps. 2. Use the metal cassette tape which is commercially available and has a capacity of 45 or 60 minutes recording.
10. PROGRAMMING PROCEDURES 10.13 CMT/PL-3 10- 21 ■ PL-3 Operation Error Code Error Message 0 FDC ERROR 1 FDK MISINSERTION ERROR 2 UNAVAILABLE FDK INSERTION ERROR 3 VOL.
10. PROGRAMMING PROCEDURES 10.13 CMT/PL-3 10- 22 ■ Table 4: Transmission Item List ITEM # Title on the Display Contents of Transmission CMT PL-3 2 VERIFY PLU & ING. = CMT 2 COMPARE PLU & ING. IN OLD FORMAT ○ ○ 3 READ PLU & ING. FM CMT 3 READ PLU & ING.
10. PROGRAMMING PROCEDURES 10.14 IN-LINE/LOCAL 10- 23 10.14 IN-LINE/LOCAL Menu Page: 2 Item No.: 3 When the SL-9000 is used as a satellite in an in-line system, the “ ID # ” and “ Transmission delay time ” can be set by the following procedure.
10. PROGRAMMING PROCEDUR ES 10.15 LON SYSTEM 10- 24 10.15 L ON SYSTEM Menu Page: 2 Item No.: 4 The SL-9000 scales which consists of a master, satellites, and a backup master are connected each other by the LON cable to transmit data such as PLU, ING., NUTRI, etc.
10. PROGRAMMING PROCEDUR ES 10.15 LON SYSTEM 10- 25 ■ Data Transmission The following data is down-line-loaded. Page 1: (0). All (PLU+ING+NUTRI) Page 2: (0). SPEED KEY (1). PLU (1). LOGO (2). ING. (2). VENDOR (3). NUTRITION (3). FREE FORMAT (4). U. PRICE (4).
10. PROGRAMMING PROCEDURES 10.16 BAR CODE FORMAT 10- 26 10.16 BAR CODE FORMAT Menu Page: 2 Item No.: 6 With the SL-9000 scale, four kinds of bar code formats are available. These formats can be changed freely. When changing the above example format into the weigh format described in NOTE 1, use the following procedure.
10. PROGRAMMING PROCEDURES 10.16 BAR CODE FORMAT 10- 27 2. When the key is pressed, bar code format is checked. An error occurs in the following cases. ① Check digit (C/D) is at other than digit-13. ② Price check digit (PC/D) cannot be calculated.
10. PROGRAMMING PROCEDURES 10.17 TITLES 10- 28 10.17 TITLES Menu Page: 2 Item No.: 7 You can register and change displayed/printed titles of the additional information area for nutrition facts using the following procedure. Registered or changed titles are stored in the RAM.
10. PROGRAMMING PROCEDURES 10.18 TRANSFERRING LOGO DATA 10- 29 10.18 TRANSFERRING LOGO DATA Menu Page: 2 Item No.: 8 Logo data is created on a PC and stored into RAM through the CMT interface. Two different sizes of logos, 320x118 dots and 256x64 dots, are available on the SL-9000 series.
10. PROGRAMMING PROCEDURES 10.19 IDIOM SETTING 10- 30 ■ Table 6: Error message during data transmission 10.19 IDIOM SETTING Menu Page: 2 Item No.: 9 Up to 50 terms frequently appearing in ingredient messages can be preset using the following procedure.
10. PROGRAMMIN G PROCEDURES 10.20 VENDOR SETTING 10- 31 10.20 VENDOR SETTING Menu Page: 3 Item No.: 0 Up to 40 vendors can be registered using the following procedure. The vendor number must be set from 0 to 39 in order. One vendor name can contain a maximum of 12 characters.
10. PROGRAMMING PROCEDURES 10.21 FREE FORMAT SETTING 10- 32 10.21 FREE FORMAT SETTING Menu Page: 3 Item No.: 1 When using 57-mm wide labels, up to three print formats can be changed freely. Moreover, characters can be rotated and magnified, and print items are selectable.
10. PROGRAMMING PROCEDURES 10.21 FREE FORMAT SETTING 10- 33 NOTES: 1. The following print items cannot be magnified. (1) LOGOs (2) Safe handling precautions (3) Ingredient messages (4) Barcode (5) FSP block (SL-9000N only) 2. Base label format numeric data is shown automatically.
10. PROGRAMMING PROCEDURES 10.21 FREE FORMAT SETTING 10- 34 Print area size Normal Rotation No. Print Item X Y X Y Note 26 (F) Unit price (title) 105 13 13 120 27 (F) Weight 106 20 20 112 28 (F) Weigh.
10. PROGRAMMING PROCEDURES 10.21 FREE FORMAT SETTING 10- 35 8. Print coordinate *1 Addresses are printed together with the previous label ’ s data. To print addresses, use normal labels. POS (Format #10-16): 10.0 mm NET (Format #21-26): 10.0 mm Bar code (Format #31-35): 8.
11. PROGRAMMED DATA VERIFICATION REPORTS 11. PROGRAMMED DATA VERIFICATION REPORTS 11- 1 11. PROGRAMMED DATA VERIFICATION REPORTS The programmed data can be printed on journal paper. Before issuing these reports, load the journal paper. The programmed data verification reports cannot be issued with any label.
11. PROGRAMMED DATA VERIFICATION REPORTS 11. PROGRAMMED DATA VERIFICATION REPORTS 11- 2 Table 7 Menu # Report Name Contents 50 PLU programmed data report All the preset PLU data are listed in the PLU # order (from small to large #). 51 Commodity description report All the preset commodity names are listed in the PLU # order (from small to large #).
12. PASSWORD SECURITY 12.1 SETTING PASSWORD AND PROTECT MENU 12- 1 12. PASSWORD SECURITY You can protect all menus (except REG. menu) and set two step passwords for access to protected menus. 12.1 SETTING PASSWORD AND PROTECT MENU P M R SX Z ○○○○ ー ○ P M R SX Z ×○○× ー ○ Select menus to be protected.
12. PASSWORD SECURITY 12.1 SETTING PASSWORD AND PROTECT MENU 12- 2 P M R SX Z ○×○○ ー × Enter password B in 4 digits. Exclude menus to which password B cannot access. ○ : Valid × : Invalid ー : Not need 1 2 3 4 2 6 w NOTES: 1. Select validity of the password by pressi ng the key 2.
12. PASSWORD SECURITY 12.2 CALLING MENU BY ENTERING PASSWORD 12- 3 12.2 CALLING MENU BY ENTERING PASSWORD NOTE: When the password is unknown, enter “ HELP ” instead, and you can access only security menu. <Menu> 0. PROG. 5. REPORT 1. REG. 6.
13. OPERATING PROCEDURES ■ NOTES BEFORE STARTING OPERATION 13- 1 13. OPERATING PROCEDURES ■ NOTES BEFORE STARTING OPERATION ■ How to access REG., M.DOWN, or REWRAP menu (1) Turn the power ON. (2) A sixteen-second scanning will be performed after pressing the key.
13. OPERATING PROCEDURES 13.1 WEIGHING OPERATION 13- 2 13.1 WEIGHING OPERATION Menu: REG., M.DOWN, or REWRAP Mode: WEIGH The weigh mode is used to weigh a commodity and to issue the label. The label contains data such as a weight, unit price (price per weight) and total price (calculated as a result of the weighing operation).
13. OPERATING PROCEDURES 13.2 FIX PRICE OPERATION (FOR US TYPE ONLY) 13- 3 13.2 FIX PRICE OPERATION (FOR US TYPE ONLY) The FIX mode (Fix Price Mode) is used to issue a label for a commodity of a fixed price PLU (i.e. the price determined by the store), the weight of which may vary from commodity to commodity.
13. OPERATING PROCEDURES 13.3 BY COUNT OPERATION 13- 4 13.3 BY COUNT OPERATION The BY-COUNT mode is used to issue the label of commodities of the same kind in a package (or may not be packed). The whole package quantity (or a certain quantity) and the whole package price (or the price per the quantity) are usually preset.
13. OPERATING PROCEDURES 13.3 BY COUNT OPERATION 13- 5 Example) An open price item can be sold as below: ① 1 piece at 15 dollars ② 15 pieces at 10 dollars ③ 15 pieces sold at 0.5 dollars per 10 pieces Enter the PLU #. 5 1 PLU 1 5 FOR Press: Press: ex.
13. OPERATING PROCEDURES 13.4 PRINT COUNT OPERATION 13- 6 13.4 PRINT COUNT OPERATION With this procedure, a specified number of the same labels can be issued. Menu: REG., M.DOWN, or REWRAP Mode: WEIGH, FIX or BY-COUNT Example A) When operating in Weigh mode.
13. OPERATING PROCEDURES 13.4 PRINT COUNT OPERATION 13- 7 Example B) When operating in Fix or By Count mode. Place a commodity on the platter. (Ex. 1.320 lb.) The label is issued with the mount paper attached. The label is issued. When all the specified numbers of labels are being issued.
13. OPERATING PROCEDURES 13.4 PRINT COUNT OPERATION 13- 8 Example C) When issuing only the nutrition information label. Note that nutrition information can be printed only on several types of label.
13. OPERATING PROCEDURES 13.5 ISSUING LABELS WITH NET WEIGHT STATEMENT (FOR US TYPE ONLY) 13- 9 13.5 ISSUING LABELS WITH NET WEIGHT STATEMENT (FOR US TYPE ONLY) Menu: REG., M.DOWN, or REWRAP Mode: FIX When the initial settings #1-7 and #1-8 are set to 1, a Net Weight Statement is printed on the label.
13. OPERATING PROCEDURES 13.5 ISSUING LABELS WITH NET WEIGHT STATEMENT (FOR US TYPE ONLY) 13- 10 NOTES: 1. To print NET WT. data, from the FIX mode, load a label which has an area to print a NET WT. Statement. 2. The quantity sold number and price data in NET WT.
13. OPERATING PROCEDURES 13.6 TARE/SAVE FUNCTION PROCEDURES 13- 11 13.6 TARE/SAVE FUNCTION PROCEDURES Menu: REG., M.DOWN, or REWRAP Mode: WEIGH or FIX (Tare % function is available in WEIGH mode only.) NOTES: 1. Tare subtraction is available up to 2.000 lb.
13. OPERATING PROCEDURES 13.7 CALLING AND PRINTING GRADE LINES 13- 12 13.7 CALLING AND PRINTING GRADE LINES A grade line is a short message added to a commodity name. A grade line can be selected from maximum of 49 programmed grade lines and printed on the label.
13. OPERATING PROCEDURES 13.8 CALLING AND PRINTING LOGOS 13- 13 13.8 CALLING AND PRINTING LOGOS When the initial set #10-7 is set to “ 1 ” (or “ 2 ” : SL-9000N only), a logo containing a picture, a mark, a POP message, etc., can be printed on the ingredient label having 12 lines or more.
13. OPERATING PROCEDURES 13.9 SELECTING PRINT ITEM 13- 14 13.9 SELECTING PRINT ITEM Menu: REG, M.DOWN, or REWRAP Mode: WEIGH, FIX, or BY COUNT Entry Item Entry Item 1 Packed on date Print/Non Print 9 Piece count Print/Non Print 2 Sell by date Print/Non Print 10 Cooked by date Print/Non Print 3 Commodity name Print/Non Print 11 SP/Info.
13. OPERATING PROCEDURES 13.9 SELECTING PRINT ITEM 13- 15 13.10 DATE CHANGE The date can be changed temporarily. Menu: REG., M.DOWN, or REWRAP Mode: WEIGH, FIX, or BY COUNT NOTES: 1. A store code can be printed in place of a ‘ packed on date ’ and ‘ sell by date ’ by changing the initial settings #6-5 and #6-6.
13. OPERATING PROCEDURES 13.11 BATCH PRINT MODE (with 30 Items Run Assignment) 13- 16 13.11 BATCH PRINT MODE (with 30 Items Run Assignment) Menu: REG., M.DOWN, or REWRAP Mode: FIX, or BY COUNT Up to 99 labels per PLU can be issued in non-scale mode. Up to 30 items can be preset.
13. OPERATING PROCEDURES 13.11 BATCH PRINT MODE (with 30 Items Run Assignment) 13- 17 ● Unit Price Change and G.Line/LOGO Call *1 By call ing the PLU designation LOGO, the LOGO can be designated per PLU and printed. When the PLU dose not designate the LOGO, the LOGO programmed before entering Batch Print Mode is printed.
13. OPERATING PROCEDURES 13.11 BATCH PRINT MODE (with 30 Items Run Assignment) 13- 18 ● Label Issue Stop or Cancel Cancel output PRT * z C Clear an error or stop label issuing. Press: Stop issuing the labels and cancel PLUs which have not been output.
13. OPERATING PROCEDURES 13.12 VISUAL COMMODITY LIBRARY 13- 19 13.12 VISUAL COMMODITY LIBRARY Menu: REG., M.DOWN, or REWRAP Mode: WEIGH, FIX, or BY COUNT In the following procedure, entering a group # (the upper two digits of PLU#) allows you to call 6 commodities which belong to the group.
13. OPERATING PROCEDURES 13.13 FLOATING VENDOR 13- 20 13.13 FLOATING VENDOR Menu: REG Mode: WEIGH, FIX, or BY COUNT Floating vendor function allows you to register different commodities sales together. This function is available when the Initial Setting #11-1 is set to 1 and using a receipt.
13. OPERATING PROCEDURES 13.13 FLOATING VENDOR 13- 21 ■ Price deletion Prices already registered can be deleted in the following procedure. ■ Subtotal The following procedure will sum up all of the registered items. VOID PRT * Enter vendor #. NEXT PLU or VOID C Enter the deletion mode.
14. TOTAL OPERATION 14. TOTAL OPERATION 14- 1 14. TOTAL OPERATION In Report or Reset mode you can issue a sales report or reset report with either a label or journal paper. Menu: REPORT or RESET REPORT The totals will not be cleared as they are printed on labels or journal paper.
14. TOTAL OPERATION 14.1 HOURLY TOTAL REPORT 14- 2 14.1 HOURLY TOTAL REPORT Ex.) REPORT Menu 14.2 GRAND TOTAL REPORT 14.3 PLU TOTAL REPORT 0 PRT * NOTES : 1. When issuing an hourly report, hours with no sales are not printed. 2. An hourly report is printed as follows: 1) Label: Issued sequentially in on-demand mode.
14. TOTAL OPERATION 14.4 VENDOR TOTAL REPORT 14- 3 14.4 VENDOR TOTAL REPORT A Individual Total Ex.) Individual PLU Total (PLU #100) B Block Total Ex.) UPC Block Total (UPC #100100 to 100199) C Zone Total Ex.) PLU Zone Total (PLU #100 to 107) D Entire PLU Total 100 1 1 0 0 ◇ ◇ NOTE : The key represents 0 through 9.
15. ERROR MESSAGE TABLE 15. ERROR MESSAGE TABLE 15- 1 15. ERROR MESSAGE TABLE Take the following action if an error message has appeared on the commodity name display along with the buzzer sounding. ● Programming Mode Message Cause Solution DATA ENTRY ERROR Error in key input.
15. ERROR MESSAGE TABLE 15. ERROR MESSAGE TABLE 15- 2 ● Label lssue Mode ● Report and Reset Mode Message Cause Solution DATA ENTRY ERROR Error in key input. Press the key, and re-input the right data. PLU NOT FOUND The PLU # being called out is not registered.
15. ERROR MESSAGE TABLE 15. ERROR MESSAGE TABLE 15- 3 ● CMT Operation Mode ● LON System Mode M: Master scale BM: Backup master scale S: Satellite scale Message Cause Solution Mismatch of the model type. Mismatch of the base unit. Mismatch of the VERSION.
16. CLEANING THE PRIT HEAD 16. CLEANING THE PRINT HEAD 16- 1 16. CLEANING THE PRINT HEAD If the print head is dirty, printing will not be clear. The print head should be cleared with a print head cleaner everyday before use, according to the following procedure: 1.
17. TROUBLESHOOTING 17. TROUBLESHOOTING 17- 1 17. TROUBLESHOOTING ■ Before You Call for Service It is our primary concern to give you full satisfaction and better service.
.
PRINTED IN SINGAPORE EM1-31076E E.
Een belangrijk punt na aankoop van elk apparaat Toshiba EM1-31076 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Toshiba EM1-31076 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Toshiba EM1-31076 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Toshiba EM1-31076 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Toshiba EM1-31076 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Toshiba EM1-31076 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Toshiba EM1-31076 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Toshiba EM1-31076 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
