Gebruiksaanwijzing /service van het product NexStar LX Ultra van de fabrikant Vantec
Ga naar pagina of 33
USER’S MANUAL C o pyri ght 2009 Vantec Thermal Technologies . All Rights Reserved..
Package Contents: NexStar ® LX Ultra USB Cable eSATA Cable RJ45 Ethernet Cable SATA to eSATA Bracket Power Adapter User’s Manual Screws User's CD 1 2 3 5 6 7 8 9 4 TRADEMARKS MS-DOS, Microsoft, Windows NT/2000/ME/XP/Vista are trademarks of Microsoft Corporation.
1. Introduction .............................................................................................................. . 02 2. Specifica tions / F eatures ............................................................................ .. . 03 3. System Requiremen ts .
Introduction 2 NST-475LX-BK 1. Introduction: Introducing the sleek contemporary design of the V antec NexStar ® LX Ultra—blending the finest functions of a Network Attached Storage (NAS) solution into a powerful little package that fits any home or office.
• Easy-T o-Use Web Control Panel • Gigabit Ethernet Supports 10/100/1000 Mbps • FTP & SMB Server T o Store And Share Y our Files • Media Server T o Stream Files Over Y our Network: -PS3 &a.
3. System Requirements: System Requirements 4 Microsoft Windows 2000/2003 server/XP x86/ XP 64 bit/Vista X86/Vista 64 bit 1. USB port, internal SATA port, eSATA port or RJ45 Ethernet port. 2. For USB 2.0 speeds, the system must support USB 2.0 specifications.
SATA/Power connector NexStar LX Ultra Gigabit NAS Hard Drive Enclosure ® 4. Parts Layout: Parts Layout 5.
NexStar LX Ultra Gigabit NAS Hard Drive Enclosure ® 5. Installation: Installation 6 (1) Unscrew the screws on the underbody as shown. ( Figure 5.1 - A ) ( Figure 5.1 - A ) ( Figure 5.1-B ) (2) Slide out the hard drive tray and place t he hard drive in.
Installation 7 ( Figure 5.2-D ) (3) Slide the hard drive tray back into the LX Ultra and re-screw the screws back on to the underbody. ( Figure 5.2-D ) ( Figure 5.
8 5.2 How to find the NexStar LX Ultra : Installation (1) Find and execute “SDisk jar” from the CD and begin the search for the NAS device. ( Figure 5.2-A ) 1. If there is more than one NAS device attached in the same local area network, you will see the other IP addresses in the IP block.
9 Installation (4) After entering the web UI, please select a language of your choice. ( Figure 5.2-C ) (1) Click on “Disk Utility” located on the left list. (2) Next click “Format” to begin the format of the hard disk. ( Figure 5.3 -A ) ( Figure 5.
10 Status Page (4) By clicking "Status", you will see information pertaining to your NAS and Hard Drive. ( Figure 5.3- C ) (1) Click on "Change" ( Figure 6.1-A ) (2) Enter desired Host and Group name. When finished, press "OK".
11 Status Page (1) Click on "Change". ( Figure 6.2-A ) (2) Enter desired password. Retype the password once more and press "OK" when finished. ( Figure 6.2-B ) ( Figure 6.2-A ) ( Figure 6.2-B ) 6.2 Changing the administrator ’s password.
12 FTP Server 7.1 Creating a new FTP account The FTP Tab allows you to easily setup your FTP Server. You may manage accounts and control the files/folders that are being shared. ( Figure 7.1- A ) Default account settings User name: anonymous Password: “empty” (1) Click "New" ( Figure 7.
7. 2 Modifying the FTP user account (1) Select the account you wish to modify. When selected, click on the "Modify". ( Figure 7.2- A ) (2) You may now change the account's password and access authority. When finished, click on the "Modify".
Here you can share the folder for established user : (2) Begin by choosing a folder from the Folder List you wish to share with the user. Press the "Direction Arrow" button so that the folder shows up under Sharing List. (3) When finished, click "Back" to return to the previous page.
(2) You may change the user's password and access authority. When finished , click "Modify". ( Figure 8.2- B ) (1) Select the user account you wish to modify. Once selected, click "Modify". ( Figure 8.2- A ) 8.2 Modifying a user's account ( Figure 8.
(2) Begin by choosing a folder from the Folder List you wish to share with the user. Press the "Direction Arrow" button so that the folder shows up under Sharing List. ( Figure 8.5-B ) When finished, click on "Back" to return to the previous page.
17 SMB Server (1) Open up "My Network Places". ( Figure 8.6- A ) (2) Double click “Workgroup”. ( Figur e 8.6- B ) 8.6.Logging into the NAS by using a user account ( Figure 8.6- A ) (3) Here you will find the NST-475LX storage. Double click the storage to login.
18 IP Configuration Here you can change the NAS to either automatically obtained an IP address or manually set a static IP. When se t t o Automatic, the NAS will automatically obtain the an assigned IP address which is given by the DHCP server.
10. Printer Setup 19 Printer Setup (1) Plug the printer into the USB Printer Port. ( Figure 10 - A ) (2) Ensure the printer is installed on the NAS's web page. ( Figure 1 0- B ) (3) Locate your computer's "Printers and Faxes" settings.
20 Printer Setup (7) Select "Create a new port" and choose " Standard TCP/IP". When finished, click "Next". ( Figure 10- G ) (8) Click "Next". ( Figure 10- H ) ( Figure 10- G ) ( Figure 10- H ) (5) Click "Next".
21 Printer Setup (11) Select "Custom" and click "Next". ( Figure 10- K ) (9) Type the IP Address in the "Printer Name or IP Address" box and when finished click "Next".
22 Printer Setup (12) Select Protocol "LPR" and in the LPR Settings under Queue Name type "LP1" as shown in the picture. ( Figure 10- L) (13) When finished, click "Finish".
1 1.1. iTunes 11. Media Server 23 Media Server The Media Server is a powerful tool that allows the NAS to host an array of files on the network. Photos, music and videos are shared over the network and support a variety of platforms which includes but not limited to computers, iTunes, PS3, Xbox360.
This product can upload many BitTorren t ™ files at the same time however when downloading, there is a max that can be downloaded at one time. The LX Ultra will put the rest of the BitTorren t ™ files that are not currently being downloaded into que.
25 How to use BT download (1) In this example, Microsoft Outlook will be used. (2) Select "Accounts" in "Tools". ( Figure 1 2. 2 - A ) (3) Under the "Mail" tab select the account and then check its "Properties".
26 How to use BT download (5) Type the "Account name and Password" for the Outgoing Mail Server. Make sure this information is also the same in the BitTorren t ™ Mail Notification function also. When finished, click "Apply". ( Figure 1 2.
On the maintenance page, you are able to do Firmware Upgrades, preform a System Reboot and restore Factory Defaults. ( Figure 13 . 1-A ) (2) Check to make sure the file and pathway of the firmware file is correct. If everything is correct, click "Upload".
( Figure 13.2-A ) ( Figure 13.3-A ) 28 Maintenance Page A reboot of the NAS is possible without the need of powering off. If you feel the network or NAS is not smooth or a bit sluggish, try a reboot of the NAS. ( Figure 13.2-A ) 13.2 System reboot A reset will reset the NAS to Factory D efault Settings.
14.3. Scan Disk Click on "Start" to begin the scanning of the hard disk. Once complete, a report will be displayed; Number of Files, Number of Directories, Used Size and Number of Errors. You may erase the information displayed by clicking "Clear".
(1) Power off the NexStar ® LX Ultra. ( Figure 15 - A ) (2) Press and hold the reset button while you turn on the LX Ultra. ( Figure 15 -B ) (3) Continue to hold the reset button for 20 seconds. Once 20 seconds has elapsed, please let go of the reset button.
W arrant y / Contact 31 16. Warranty: 17. Contact : V antec Thermal T echnolo gies 43951 Boscell Rd. Fremont, CA 94538 tel: 510-668-0368 fax: 510-668-0367 website: www.vantecusa.com The NexStar® LX Ultra comes with a 1 year limited warranty ( 90 day part s ).
Een belangrijk punt na aankoop van elk apparaat Vantec NexStar LX Ultra (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Vantec NexStar LX Ultra heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Vantec NexStar LX Ultra vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Vantec NexStar LX Ultra leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Vantec NexStar LX Ultra krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Vantec NexStar LX Ultra bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Vantec NexStar LX Ultra kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Vantec NexStar LX Ultra . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
