Gebruiksaanwijzing /service van het product WX5 van de fabrikant Yamaha
Ga naar pagina of 44
.
2 This product utilizes batteries or an external power supply (adapter). DO NOT connect this product to any power supply or adapter other than one described in the manual, on the name plate, or specifically recommended by Yamaha.
3 PRECAUTIONS PLEASE READ CAREFULL Y BEFORE PROCEEDING * Please k eep these precautions in a safe place f or future ref erence. • Do not open the instrument or attempt to disassemble the internal parts or modify them in any way . The instrument contains no user -serviceable parts.
4 Congratulations! Y our Y amaha WX5 is a state-of-the-art W ind MIDI Controller which takes wind MIDI control to new levels of performance and playability .
5 Main WX5 Features Realistic wind-instrument type response and play ability off ers unprecedented expressiv e control. A 16-ke y la yout similar to the standard saxophone la y- out, and a choice of f our finger ing modes, mak e the WX5 easily accessible to most wind pla yers.
6 1 Mouthpiece The WX5 is supplied with two mouthpieces: a saxophone-type mouthpiece with a reed, and a recorder-type mouthpiece with no reed. The WX5 is initially shipped with the saxophone-type mouth- piece attached. T o remove and replace the mouthpiece see the “Maintenance” section on page 28.
7 @ Pitch Bend Wheel Like the pitch bend wheel on keyboard synthesizers, the WX5 pitch bend wheel can be used to produce smooth upward or down- ward pitch bends. Details on page 13. # Ke y Hold Button The Key Hold button controls any of four assignable key hold functions including sustain.
8 P o wer Suppl y Setting Up Since the WX5 is a MIDI controller , it must be used with a MIDI tone generator to produce sound. Y amaha recommends the VL70-m or an MU-series XG tone generator , but just about any MIDI tone gener ator can be used.
9 Connecting to a T one Generator Setting Up WX5 Connection Connect the end of the WX cable with the screw ring to the WX5. Insert the connector with the arrow on the cable connector facing upward, then tighten the screw ring to ensure a solid connection.
10 Preparing to Play T urning the Power On Whether you are powering the WX5 via the WX cable connected to a VL70-m tone generator , or via an AC adap- tor or batteries, the WX5 power is switched on by sliding the POWER switch to the “ON” position.
11 Preparing to Play ■ Loose Lip In the loose lip mode no pressure (or very slight pressure) is applied to the reed when playing normally . Pressure applied to the reed causes an increase in pitch.
12 Basic Playing T echniques WIND GAIN WIND ZERO LIP GAIN LIP ZERO Vel Win Win LIP LIP LIP LIP+ Tr ns Fing Fast Hi ct Whl OFF + – ON DC IN 12V MIDI OUT WX OUT POWER nrm fix nrm hrd nrm wide P/B M/W .
13 Basic Playing T echniques Octave Shift The octave keys can be used to shift the pitch up or down by one, two, or three octaves while playing, as fol- lows: [Up 2] Octave K ey 3 octa ves up [Up 1] +.
14 Basic Playing T echniques WIND GAIN WIND ZERO LIP GAIN LIP ZERO Vel Win Win LIP LIP LIP LIP+ Tr ns Fing Fast Hi ct Whl OFF + – ON DC IN 12V MIDI OUT WX OUT POWER nrm fix nrm hrd nrm wide P/B M/W .
15 Basic Playing T echniques Press the Key Hold button while no note is being played to disengage the Key Hold function. In the Normal Hold mode, no key off message is trans- mitted to the tone generator when breath pressure is stopped. Rather , the sound is stopped because the wind sensor produces a volume value of “0”.
16 Program Change Control By using the pla ying ke ys and octa ve k eys in conjunction with the Prog ram Change button, it is possib le to change voices and other MIDI functions on y our tone generator directly from the WX5. • Refer to y our tone generator’ s owner’ s man ual f or details on the per tinent MIDI settings and functions.
17 Program Change Control ■ Direct Pr ogram Change Entr y Specific program change numbers can be directly trans- mitted from the WX5 by using the playing keys (num- bers 1 through 0 are assigned to the keys - see illustration above) while pressing the Program Change button.
18 Program Change Control WIND GAIN WIND ZERO LIP GAIN LIP ZERO Vel Win Win LIP LIP LIP LIP+ Tr ns Fing Fast Hi ct Whl OFF + – ON DC IN 12V MIDI OUT WX OUT POWER nrm fix nrm hrd nrm wide P/B M/W off.
19 Program Change Control Mono/Poly & Portamento Switching By using the Octave Keys while holding the Program Change button, it is possible to transmit MIDI Mono, Poly , and Portamento mode messages to your tone gen- erator .
20 Using the Setup Button A number of impor tant WX5 parameters can be changed as required by using the Setup b utton in conjunc- tion with the Octa ve k eys or Pitch Bend wheel.
21 Using the Setup Button • The WX5 hardware wind gain f or the wind sensor is set as described on page 25. Set both the hardware and software wind gain f or optimum pla yability .
22 Setup Switch Settings The WX5 has 16 DIP s witches which can be used to set up a range of impor tant basic parameters . These switches are not intended f or frequent use, b ut rather to set up the WX5 to match your individual pla ying requirements.
23 Setup Switch Settings ● Switch 1-7 (Lip) - Lip Data Specifies the type of MIDI data via which the WX5 lip data will be transmitted. SW 1-7 Setting OFF Pitch Bend ON Modulation Wheel ● Switch 1-.
24 Setup Switch Settings ● Switch 2-7 & 8 (Whl) - Pitch Bend to MIDI Data Determines the initial power-on Pitch Bend Wheel con- trol mode (page 13).
25 Wind & Lip Sensor Adjustment P erf or m the sensor adjustments after selecting the required pla ying mode (page 10). Wind Zero & W ind Gain Adjustment Adjust both W ind Zero and Wind Gain to set the ideal relationship between wind pressure input and MIDI data output for your playing style.
26 Wind & Lip Sensor Adjustment Lip Zero & Lip Gain Adjustment The WX5 lip sensor translates lip pressure applied to the WX5 reed to MIDI pitch bend data.
27 T uning T wo tuning methods are possib le with the WX5: T one Generator T uning, and Lip Sensor T uning. ■ T one Generator T uning Most tone generators have a master tuning parameter that can be used to tune the tone generator ’ s sound.
28 Maintenance Although the WX5 does not require the constant maintenance that acoustic wind instruments do , the simple maintenance steps described below will ensure that your WX5 will deliv er optimum perf ormance at all times.
29 MIDI System Setup Examples The WX5 can be used with MIDI de vices other than just tone generators f or expanded capabilities . Foot Control Data from a Y amaha MFC10 MIDI Foot Controller can be added to the MIDI output from the WX5 for extra control capability .
30 T roubleshooting The LED indicators don’t light when the pow er is turned on. • The Loose Lip mode is selected. When the Loose Lip mode is selected the LED indicators ma y not light. This is nor mal. • If the Tight Lip mode is selected, the lip sensor may not be adjusted properly .
31 Index A A C Adaptor ....................................... 8 A udition Function ........................... 21 B Bank Select MSB ........................... 17 Bank Select LSB ............................ 17 Batteries .............................
32 WX5 Fingering Ref er to page 12 f or more information about the WX5 fingerings. Saxophone(a) ● The whole-tone trill key (side E) and semitone trill k ey (side A # ) raise the pitch of all notes a whole tone or semitone , re- spectively .
33 8va 8va 8v a 8va WX5 Fingering Saxophone(a) Octave up.
34 WX5 Fingering Saxophone(b) ● The whole-tone trill key and semitone trill k ey raise the pitch of all notes a whole tone or semitone, respectiv ely . ● The High D # ke y and High D k ey raise the pitch of all notes a whole tone or semitone, respectiv ely .
35 8va 8va 8va WX5 Fingering Saxophone(b) Octave up.
36 A B C E B A B A D B A A A A A A A A A B B B B A B C E D C A B C A B A A B C B D A C B D B B WX5 Fingering Saxophone(c) This chart shows only the alternate fingerings pr ovided in addition to the Saxophone(a) fingerings. ● Alternate finger ing v ariations are shown in A through E.
37 OCT UP2 OCT UP1 OCT UP2 OCT UP1 OCT UP2 OCT UP1 WX5 Fingering Flute.
38 MIDI Data Format 1. TRANSMIT D A T A 1-1. CHANNEL V OICE MESSA GES 1-1-1. NOTE ON/OFF ST A TUS 1001nnnn ($9n) NO TE No . 0kkkkkkk k = 10 (Bb-2) - 104 (G#6) k = 0 (C-2) - 127 (G8) when F ollow Hold is ON. VELOCITY 0vvvvvvv v = 0 Note Off 1-1-2 CONTROL CHANGE ST A TUS 1011nnnn ($Bn) CONTROL No .
39 YAMAHA [ Wind MIDI Controller ] Date:17-Nov-1997 Model WX5 MIDI Implementation Chart Version : 1.0 +------------------------------------------------------------------------+ : : Transmitted : Remarks : : Function .
40 WX5 Specifications Sensors Wind Sensor , Lip Sensor Ke ys/Buttons/Switches 16 ke ys, Octav e keys (Up2, Up1, Do wn1, Down2), Setup But- ton, Pitch Bend Wheel, K ey Hold Button, Program Change Butto.
41 Key Operation Chart / MIDI Message Assignments PB MW BC V OL EXP GEN1 GEN2 GEN3 BR GC5 GC6 Lip ❍ ❍ Lip ❍❍ Wind ❍ Wind ❍ Wind ❍ PB ❍ PB ❍❍ PB ❍❍ PB ❍ High K eys ❍❍ When.
42 42 For details of products, please contact your nearest Yamaha or the authorized distributor listed below. Pour plus de détails sur les produits, veuillez-vous adresser à Yamaha ou au distributeur le plus proche de vous figurant dans la liste suivante.
.
M.D .G., EMI Division © Y amaha Corporation 1998 V201440 802POCP12.2-01A0 Printed in Japan.
Een belangrijk punt na aankoop van elk apparaat Yamaha WX5 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Yamaha WX5 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Yamaha WX5 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Yamaha WX5 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Yamaha WX5 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Yamaha WX5 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Yamaha WX5 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Yamaha WX5 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
