Gebruiksaanwijzing /service van het product FX150A van de fabrikant Black Box
Ga naar pagina of 51
CUSTOMER SUPPORT INFORMATION Order toll-free in the U.S. 24 hours, 7 A.M. Monday to midnight Friday: 877-877-BBOX FREE technical support, 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746 Mail order: Black Box Corporation , 1000 Park Drive, Lawrence, PA 15055-1018 Web site: www.
3 FCC ST A TEMENT FEDERAL COMMUNICA TIONS COMMISSION RADIO FREQUENCY INTERFERENCE ST A TEMENT Class B Digital Device. This equipment has been tested and found to comply with the limits for a Class B computing device pursuant to Part 15 of the FCC Rules.
4 LINESHARE PRO NORMAS OFICIALES MEXICANAS (NOM) ELECTRICAL SAFETY ST A TEMENT INSTRUCCIONES DE SEGURIDAD 1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el aparato eléctrico sea operado. 2. Las instrucciones de seguridad y operación deberán ser guardadas para referencia futura.
5 NOM ST A TEMENT 11. El aparato eléctrico deberá ser connectado a una fuente de poder sólo del tipo descrito en el instructivo de operación, o como se indique en el aparato. 12. Precaución debe ser tomada de tal manera que la tierra fisica y la polarización del equipo no sea eliminada.
6 LINESHARE PRO TRADEMARKS All applied-for and registered trademarks are the property of their respective owners..
7 LINESHARE PRO CONTENTS 1. Specifications ....................................................................................9 2. Introduction .....................................................................................10 2.1 Before You Begin .
8 LINESHARE PRO [3] No Answer Cascade ..........................................................40 [4] Answer/Disconnect Cascade ...........................................41 [5] Pulse Transfer .........................................................
9 LINESHARE PRO 1. Specifications Connectors — (1) RJ-11 line in, (4) RJ-11 device ports Ringer Equivalency — 1.0 B Operating Temperature — 5° to 113° F (-15° to 45° C) Maximum Relative Humidity — 85% MTBF — 56,200 hours Power — 12 VAC, 830 mA external transformer Size — 1.
10 LINESHARE PRO 2. Introduction Phone Company Voice Mail: The phone company’s voice- mail service is not compatible with the Lineshare Pro, but stand- alone voice mail systems work well with the Lineshare Pro. We recommend that service for call forwarding, and the phone company’s voice mail be discontinued.
11 LINESHARE PRO Listed below are examples of various telephone-activated devices that can be connected to the Lineshare Pro: • Fax/modem • Computer modem • Facsimile machine • Telephone Answe.
12 LINESHARE PRO 3. Installation For installation, you may need the following equipment: • one telephone cable—provided with the Lineshare Pro • additional telephone cables— typically supplied with equipment by the manufacturer.
13 LINESHARE PRO Figure 3-1. Rear Panel of the Lineshare Pr o. telephone device may connect to this port (such as a fax, answering machine, computer modem, and so on). 4. Any type of analog telephone device may connect to this port (such as a fax, answering machine, computer modem, and so on).
14 LINESHARE PRO 3.2 Installing the Lineshare Pro on a Single Phone Line with a Single Phone Figure 3-2 shows a single-line/single- phone arrangement before installing the Lineshare Pro. If you have this type of arrangement, you can install the Lineshare Pro yourself using the instructions provided in this section.
15 LINESHARE PRO To install the Lineshare Pro on a single phone line, as shown in Figure 3-3 , follow these steps: • Unplug the telephone cable from the wall jack. • Plug one end of the telephone cable provided with the Lineshare Pro into the LINE port on the back of the Lineshare Pro.
16 LINESHARE PRO 3.3 Connecting T elephone Equipment to the Lineshare Pro Figure 3-4 shows a complete installation for a single phone line/single phone arrangement. While the connections to the wall jack may be different for other types of phone systems, the connections to the Lineshare Pro remain the same for all phone configurations.
17 LINESHARE PRO Figure 3-4. T elephone Equipment Connected to the Lineshare Pr o in a Single-Phone-Line/Single-Phone Ar rangement. LINE PORT 1 PORT 2 PORT 3 PORT 4 12V AC Telephone Wall Jack 110 Volt.
18 LINESHARE PRO 3.4 Installing the Lineshare Pro on a Single Phone Line with Multiple Single-Line Phones You can install the Lineshare Pro in a phone configuration with multiple single-line phones by adding the Lineshare Pro on a single extension. If the Lineshare Pro is installed as an Figure 3-5.
19 LINESHARE PRO NOTE To fully use this application, you must turn the Extension Detection feature ON (see Chapter 5 for more information). You should also set the time that the Lineshare Pro waits for detection with the Extension Detection timer.
20 LINESHARE PRO NOTE The RJ-11 jacks have four (4) posts: The red post is marked [R], the green post is marked [G], the yellow post is marked [Y], and the black post is marked [B]. 2. Locate the telephone line from the phone company after it enters the premises but before it routes to any phone jack.
21 LINESHARE PRO Figure 3-6. The Lineshare Pr o Installed on a Single Line with Multiple Phones while Maintaining Exclusion. LINE PORT 1 PORT 2 PORT 3 PORT 4 12V AC Phone Company Junction Box Red Red .
22 LINESHARE PRO 3.6 Installing the Lineshare Pro on a KSU or PBX System A KSU or PBX phone system is common in a medium or large office arrangement in which calls are coming in on two or more lines and can be routed to any number of extensions.
23 LINESHARE PRO Figure 3-7. The Lineshare Pr o Installed on a KSU or PBX Phone System. LINE PORT 1 PORT 2 PORT 3 PORT 4 12V AC 1 2 3 4 1 2 3 4 KSU/PBX Connect the Lineshare Pro to the last line in rollover.
24 LINESHARE PRO 4. Using the Lineshare Pro Computer modems : Unlike fax calls, inbound computer calls do not produce any tones; they remain silent until another modem answers the call. The Lineshare Pro works best when calls from modem-type devices have the ability to identify themselves with an identifying tone.
25 LINESHARE PRO The Lineshare Pro has two basic modes of operation: • In the secured mode , when a call comes in, the Lineshare Pro answers the call on the first ring and waits silently for a pre- specified routing tone. The Lineshare Pro will wait for the amount of time set in the Time at Home function.
26 LINESHARE PRO You can reset the ring count for the Ring Reduction feature to six rings by performing any of the following steps: • Lift the receiver of the phone device connected to the primary default port. • Answer a call from any phone before the call is routed to another port.
27 LINESHARE PRO “Hello, this is ________ . If you want to send a fax, press # 2 2 on your tone phone, or leave a message at the tone.” (In this application, your fax should be connected to Port 2.) You can also announce the tone access code for Port 3 or Port 4 (# 3 3 or # 4 4) if you want to allow open access to these ports.
28 LINESHARE PRO During an outbound call, you can also receive a data or fax transmission from someone that is ready to transmit. To route this transmission from a tone phone to a specific port, press # 11 for Port 1, # 22 for Port 2, # 33 for Port 3, or # 44 for Port 4.
29 LINESHARE PRO 4.9 Sending a Fax or Modem T ransmission To send a fax or modem transmission, you must either dial from the phone connected to the fax machine or modem, or use the auto-dial feature of the device you are using. (Refer to your fax machine or modem Operator’s Guide for instructions.
30 LINESHARE PRO 4.12 Dialing the Destination Computer through the Calling Computer To have the calling modem automatically “over dial” a port access code and access the modem connected to the Lineshare Pro, the caller must take into consideration whether the call is local or long distance.
31 LINESHARE PRO ATDP (phone number) T ,#22,#22,#22,#22 Again, you should consider whether the call is local or long distance, and what the appropriate access code is for the desired port.
32 LINESHARE PRO NOTE You must turn Protocol Tone Access Signal Detection ON to route calls to Port 1 and Port 2 using this application. Port 3 and Port 4 are factory- preset ON.
33 LINESHARE PRO 5. Using the Lineshare Pro’ s Custom Features and Functions The following sections explain how to enter the programming mode and change the features and functions. 5.1 Entering the Programming Mode To enter the programming mode, perform the following steps: 1.
34 LINESHARE PRO If the Lineshare Pro does not enter the programming mode (the green LED continues flashing), try again with a different phone. When you are in the programming mode and entering change.
35 LINESHARE PRO T able 5-1. Lineshare Pro Custom Features. Feature Feature Factory Setting Options Number A vailable 0 Extension Detection 0 0 OFF/1 ON 1 Home Routing 0 0 OFF/1 ON 2 Secured Operation 0 0 OFF/1 ON NOTE: Turning the secured operation feature ON affects the operation of other features.
36 LINESHARE PRO 5.3 Lineshare Pro Functions Enter the programming mode by pressing # *. Change function settings by entering the function number, followed by a valid entry from the options available column. Exit the programming mode by pressing * *. T able 5-2.
37 LINESHARE PRO T able 5-2 (continued). Lineshare Pro Custom Functions. Function Function Factory Setting Options Number A vailable 7 6 Extension Detection to Timer 1.
38 LINESHARE PRO The following sections contain specific information about each feature and function and how to change the setting. 5.4 Changing ON/OFF features Earlier in this chapter, Table 5-1 listed the features that can be turned ON or OFF individually, or simultaneously with other features during a single programming session.
39 LINESHARE PRO factory-preset OFF, 0 0 *. To turn the Extension Detection feature ON, enter the programming mode and press the following on your tone phone: 1 Turn ON 0 Extension Detection * End pro.
40 LINESHARE PRO (For more information about the secured mode, see Section 4.2 ) The Secured Operation feature is factory-preset OFF, 0 2 *. Turn this feature ON if you want to limit access to the Lineshare Pro ports.
41 LINESHARE PRO The Answer/Disconnect Cascade feature is factory preset OFF, 0 4 *. To turn the Answer/Disconnect Cascade ON, enter the programming mode and press the following on your tone phone: 1 .
42 LINESHARE PRO When ON, this feature is typically used when all the phones are wired directly to the primary default port of the Lineshare Pro. If you pick up a phone connected to the primary default port, and hear a busy tone indicating that a device on another port is on the line, simply hang up the phone.
43 LINESHARE PRO If you do not want the Ring Reduction feature to reduce the ring count on the primary default port, you can turn the feature OFF. The feature is factory-preset ON, 1 8 *.
44 LINESHARE PRO [2] [1] Protocol Tone Access Signal Detection Protocol Tone Access Signal Detection allows you to turn ON or OFF each port’s ability to detect single-frequency routing tones. Setting the options for this function can be performed in two ways: • Setting an individual port ON or OFF.
45 LINESHARE PRO NOTE Settings in this function do not affect the settings in the Dual Tone Assignments function. Dual Tone Detection is factory- preset as follows (the first number is the correspondi.
46 LINESHARE PRO T able 5-3. Protocol T one Access Signal Options. 2 3 Protocol Tone Access Signal The desired port selection (1-4) 4 The desired new Protocol Tone Access Signal * End programming sequ.
47 LINESHARE PRO To select different protocol tones for all ports, press the following on your tone phone: 2 3 Protocol Tone Access Signal 0 Select all ports 1 through 4 The desired new protocol tones.
48 LINESHARE PRO NOTE You can enter one, two, three, or all four port numbers in this function. The Lineshare Pro will release a call after it reaches the last port in this sequence. [4] Phantom Ring Style When the Lineshare Pro answers a call, it produces a “phantom” ring signal.
49 LINESHARE PRO To turn Emergency Call Override ON (automatic mode), enter the programming mode and press the following on your tone phone: 5 Emergency Call Override 1 Automatic * End programming seq.
50 LINESHARE PRO [7][5] Time at Home The Time at Home function controls the amount of time that the Lineshare Pro holds the phone line open and listens for a routing command. It is activated when the Lineshare Pro is in the secured mode, or when Home Routing is turned ON and a call is routed home.
51 LINESHARE PRO • Port 1 6 rings • Port 2 4 rings • Port 3 4 rings • Port 4 4 rings To change the Rings Available to a port to 20 rings, enter the programming mode and press the following on .
1000 Park Drive • Lawrence, PA 15055-1018 • 724-746-5500 • Fax 724-746-0746 © Copyright 1996. Black Box Corporation. All rights reserved..
Een belangrijk punt na aankoop van elk apparaat Black Box FX150A (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Black Box FX150A heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Black Box FX150A vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Black Box FX150A leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Black Box FX150A krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Black Box FX150A bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Black Box FX150A kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Black Box FX150A . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
