Gebruiksaanwijzing /service van het product 486DX, 486DX2, 486DX4 van de fabrikant Acrosser Technology
Ga naar pagina of 81
AR-B1462 INDUSTRIAL GRADE 486DX/DX2/DX4 CPU CARD Use r ’ s Guide Edition: 2.0 Book Number: AR-B1462-99.A02.
.
AR-B1462 User ¡¦ s Guide 0-1 Table of Contents 0. PREFACE ....................................................................................................................................................... 0-3 0.1 COPYRIGHT NOTICE AND DISCLAIMER .
AR-B1462 User ¡¦ s Guide 0-2 6.2 SWITCH SETTING ...................................................................................................................................................................... 6-1 6.2.1 Overview ...............
AR-B1462 User ¡¦ s Guide 0-3 0. PREFACE 0.1 COPYRIGHT NOTICE AND DISCLAIMER April 1999 Acrosser Technology makes no representations or warranties with respect to the contents hereof and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose.
AR-B1462 User ¡¦ s Guide 0-4 0.6 ORGANIZATION This information for users covers the following topics (see the Table of Contents for a detailed listing): l Chapter 1, “ Overview ” , provides an overview of the system features and packing list. l Chapter 2, “ System Controller ” describes the major structure.
AR-B1462 User ¡¦ s Guide 1-1 1. OVERVIEW This chapter provides an overview of your system features and capabilities. The following topics are covered: l Introduction l Packing List l Features 1.1 INTRODUCTION The AR-B1462 is a disk size industrial grade CPU card that has been designed to withstand continuous operation in harsh environments.
AR-B1462 User ¡¦ s Guide 1-2 1.2 PACKING LIST The accessories are included with the system. Before you begin installing your AR-B1462 board, take a moment to make sure that the following items have been included inside the AR-B1462 package.
AR-B1462 User ¡¦ s Guide 2-1 2. SYSTEM CONTROLLER This chapter describes the major structure of the AR-B1462 CPU board. The following topics are covered: l DMA Controller l Keyboard Controller l Interrupt Controller l Real-Time Clock and Non-Volatile RAM l Timer l Serial Port l Parallel Port 2.
AR-B1462 User ¡¦ s Guide 2-2 2.3 INTERRUPT CONTROLLER The equivalent of two 8259 Programmable Interrupt Controllers (PIC) are included on the AR-B1462 board.
AR-B1462 User ¡¦ s Guide 2-3 2.3.1 I/O Port Address Map Hex Range Device 000-01F DMA controller 1 020-021 Interrupt controller 1 022-023 System -- ALI M1489/M1487 Video – C & T F65550 (PCI bus.
AR-B1462 User ¡¦ s Guide 2-4 I/O Pin Signal Name Input/Output I/O Pin Signal Name Input/Output A14 SA17 Input/Output B14 -IOR Input/Output A15 SA16 Input/Output B15 -DACK3 Output A16 SA15 Input/Outp.
AR-B1462 User ¡¦ s Guide 2-5 2.4 REAL-TIME CLOCK AND NON-VOLATILE RAM The AR-B1462 contains a real-time clock compartment that maintains the date and time in addition to storing configuration information about the computer system. It contains 14 bytes of clock and control registers and 114 bytes of general purpose RAM.
AR-B1462 User ¡¦ s Guide 2-6 2.6 SERIAL PORT The ACEs (Asynchronous Communication Elements ACE1 to ACE4) are used to convert parallel data to a serial format on the transmit side and convert serial data to parallel on the receiver side.
AR-B1462 User ¡¦ s Guide 2-7 (5) Line Control Register (LCR) Bit 0: Word Length Select Bit 0 (WLS0) Bit 1: Word Length Select Bit 1 (WLS1) WLS1 WLS0 Word Length 0 0 5 Bits 0 1 6 Bits 1 0 7 Bits 1 1 .
AR-B1462 User ¡¦ s Guide 2-8 (9) Divisor Latch (LS, MS) LS MS Bit 0: Bit 0 Bit 8 Bit 1: Bit 1 Bit 9 Bit 2: Bit 2 Bit 10 Bit 3: Bit 3 Bit 11 Bit 4: Bit 4 Bit 12 Bit 5: Bit 5 Bit 13 Bit 6: Bit 6 Bit 1.
AR-B1462 User ¡¦ s Guide 2-9 (4) Printer Status Buffer The system microprocessor can read the printer status by reading the address of the Printer Status Buffer. The bit definitions are described as follows: XXX 1 2 3 4 5 6 7 0 -ERROR SLCT PE -ACK -BUSY Figure 2 - 2 Printer Status Buffer NOTE: X presents not used.
AR-B1462 User ¡¦ s Guide 2-10 (5) Printer Control Latch & Printer Control Swapper The system microprocessor can read the contents of the printer control latch by reading the address of printer control swapper.
AR-B1462 User ¡¦ s Guide 3-1 3. SETTING UP THE SYSTEM This section describes pin assignments for system ’ s external connectors and the jumpers setting.
AR-B1462 User ¡¦ s Guide 3-2 3.2 SYSTEM SETTING Jumper pins allow you to set specific system parameters. Set them by changing the pin location of jumper blocks. (A jumper block is a small plastic-encased conductor [shorting plug] that slips over the pins.
AR-B1462 User ¡¦ s Guide 3-3 3.2.2 Hard Disk (IDE) Connector (1) 40-Pin Hard Disk (IDE) Connector (CN5) A 40-pin header type connector (CN5) is provided to interface with up to two embedded hard disk drives (IDE AT bus). This interface, through a 40-pin cable, allows the user to connect up to two drives in a “ daisy chain ” fashion.
AR-B1462 User ¡¦ s Guide 3-4 3.2.3 Parallel Port Connector (CN9) To use the parallel port, an adapter cable has to be connected to the CN9 (26-pin header type) connector. This adapter cable is mounted on a bracket and is included in your AR-B1462 package.
AR-B1462 User ¡¦ s Guide 3-5 3.2.4 PC/104 Connector (1) 64 Pin PC/104 Connector Bus A & B (CN11) 1 2 64-Pin PC/104 Connector 63 64 Figure 3 - 6 CN11: 64 Pin PC/104 Connector Bus A & B -IOCHC.
AR-B1462 User ¡¦ s Guide 3-6 (3) I/O Channel Signal Description Name Description BUSCLK [Output] The BUSCLK signal of the I/O channel is asynchronous to the CPU clock. RSTDRV [Output] This signal goes high during power-up, low line-voltage or hardware reset SA0 - SA19 [Input / Output] The System Address lines run from bit 0 to 19.
AR-B1462 User ¡¦ s Guide 3-7 Name Description -MASTER [Input] The MASTER is the signal from the I/O processor which gains control as the master and should be held low for a maximum of 15 microsecond.
AR-B1462 User ¡¦ s Guide 3-8 (C) COM-A RS-232/TTL Select (SW1-8) ON 123456 OFF SW1-8 -- RS-232 (Factory Default Setting) 7 8 ON 123456 OFF SW1-8 -- TTL 7 8 9 10 9 10 Figure 3 - 13 SW1-8: COM-A RS-23.
AR-B1462 User ¡¦ s Guide 3-9 (E) RS-485 Mode Select (SW1-9 & SW1-10) ON 123456 OFF SW1-9 & SW1-10 -- RS-485 MODE1 7 8 ON 123456 OFF 7 8 10 9 10 9 SW1-9 & SW1-10 -- RS-485 MODE2 Figure 3 .
AR-B1462 User ¡¦ s Guide 3-10 (3) TTL Connector (CN16) 1 9 3 5 7 8 10 6 4 2 Figure 3 - 17 CN16: TTL Connector CN16 Signal CN16 Signal 1 TTLOP0 2 TTLIP0 3 TTLOP1 4 TTLIP1 5 TTLOP2 6 TTLIP2 7 TTLOP3 8.
AR-B1462 User ¡¦ s Guide 3-11 3.2.7 Keyboard Connector (1) Keyboard Lock Header (J7) 1 KBLK 2 GND J7 Figure 3 - 19 J7: Keyboard Lock Header (2) Keyboard Connector (J4) This keyboard connector is a PS/2 type keyboard connector. This connector is also for a standard IBM-compatible keyboard with the keyboard adapter cable.
AR-B1462 User ¡¦ s Guide 3-12 (2) 4-Pin Power Connector (CN6) 3 GND 2 GND 1 +12 VDC 4 +5 VDC CN6 Figure 3 - 23 CN6: 4-Pin Power Connector 3.2.10 Reset Header (J6) J6 is used to connect to an external reset switch. Shorting these two pins will reset the system.
AR-B1462 User ¡¦ s Guide 3-13 3.2.12 Battery Setting (1) Battery Charger Select (JP9) Rechargeable 1 2 JP9 Non-Rechargeable Factory Preset 3 1 2 3 JP9 Figure 3 - 27 JP9: Battery Charger Select (2) External Battery Connector (J8) J8 allows users to connector an external 4.
AR-B1462 User ¡¦ s Guide 3-14 3.2.14 CPU Setting The AR-B1462 accepts many types of microprocessors such as Intel/AMD/Cyrix 486DX/DX2/DX4. All of these CPUs include an integer processing unit, floating-point processing unit, memory-management unit, and cache.
AR-B1462 User ¡¦ s Guide 3-15 (5) CPU Cooling Fan Power Connector (CN3) 1 4 3 2 CN3 1 +12V 2 GND 3 GND 4 VCC Figure 3 - 33 CN3: CPU Cooling Fan Power Connector 3.2.15 PCI Connector (1) PCI Connector Power Select (JP1) JP1 1 2 3 4 Factory Default Setting 1 2 3 4 Disabled Enabled 3.
AR-B1462 User ¡¦ s Guide 3-16 3.2.16 Memory Setting (1) DRAM Configuration There are two 32-bit memory banks on the AR-B1462 board. It can be one-side or double-side SIMM (Single-Line Memory Modules) which is designed to accommodate 256KX36 bit to 16MX36-bit SIMMs.
AR-B1462 User ¡¦ s Guide 3-17 3.3.1 Network 4-Pin Connector (J3) 1 TPTX+ 2 TPTX- 3 TPRX+ 4 TPRX- J3 Figure 3 - 37 J3: Network Connector 3.3.2 AUI Connector (CN2) CN2 1 2 3 5 7 9 11 13 15 4 6 8 10 12.
.
AR-B1462 User ¡¦ s Guide 4-1 4. CRT/LCD FLAT PANEL DISPLAY This section describes the configuration and installation procedure using LCD and CRT display.
AR-B1462 User ¡¦ s Guide 4-2 4.2 LCD FLAT PANEL DISPLAY This section describes the configuration and installation procedure for a LCD display. Skip this section if you are using a CRT monitor only.
AR-B1462 User ¡¦ s Guide 4-3 4.2.1 Inverter Board Description The inverter board supplies high voltage signals to drive the LCD panel by converting the 12 volt signal from the AR-B1462 into a high voltage AC signal for LCD panel. It can be installed freely on the space provided over the VR board.
AR-B1462 User ¡¦ s Guide 4-4 (6) LCD Panel Display Connector (CN14) Attach a display panel connector to this 44-pin connector with pin assignments as shown below: 1 2 43 44 Figure 4 - 8 CN14: LCD Di.
AR-B1462 User ¡¦ s Guide 5-1 5. INSTALLATION This chapter describes the procedure of the utility diskette installation. The following topics are covered: l Overview l Utility Diskette l Watchdog Timer 5.1 OVERVIEW This chapter provides information for you to set up a working system based on the AR-B1462 CPU board.
AR-B1462 User ¡¦ s Guide 5-2 5.2.1 VGA Driver (1) WIN 3.1 Driver For the WIN31 operating system, user must in the DOS mode decompress the compress file.
AR-B1462 User ¡¦ s Guide 5-3 (2) WIN 95 Driver For the WIN95 operating system, user must in the DOS mode decompress the compress file. And then as to the steps: Step 1: Make the new created directory to put the VGA drivers. C:>MD VGAW95 Step 2: Insert the Utility Disk #2 in the floppy disk drive, and then copy the compress fil e — VGAWIN95.
AR-B1462 User ¡¦ s Guide 5-4 (4) OS/2 Warp Driver The following steps must be performed before you install the 65550 display ’ s driver: CAUTION: 1. OS/2 DOS Support must be installed. 2. If you previously installed SVGA support, you must do the following: a) Close all DOS Full Screen and WIN-OS2 sessions.
AR-B1462 User ¡¦ s Guide 5-5 Step 6: There are some items for choice to setup. Please choose the <Driver Installation> item, notice the function key defined. And then the screen shows the hardware setting, press [OK] starts to install. Step 7: Completed the installation, user will find two drivers: <ESS AudioDrive ES1869 4.
AR-B1462 User ¡¦ s Guide 5-6 (4) DOS Driver Step 1: Make the new created directory to put the audio drivers. C:>MD AUDOS Step 2: Insert the Utility Disk #1 in the floppy disk drive, and then copy the compress fil e — DOSDRV.ZIP, and the extract progra m — PKUNZIP.
AR-B1462 User ¡¦ s Guide 5-7 (2) SSD Utility To support the AR-B1462 solid state dis k ’ s operations, the following files have been provided on the enclosed diskette #3 ’ s directory <SSD>. (A) WD1462.EXE WD1462.EXE This program demonstrates how to enable and trigger the watchdog timer.
AR-B1462 User ¡¦ s Guide 5-8 Help to PGF File This option gives information on how to write a PGF file and how to generate ROM pattern files. An example PGF is also included. Move the reverse video bar to <Generate ROM File(s)> then press [ENTER].
AR-B1462 User ¡¦ s Guide 5-9 5.3 WATCHDOG TIMER This section describes how to use the Watchdog Timer, disabled, enabled, and trigger. The AR-B1462 is equipped with a programmable time-out period watchdog timer. User can use the program to enable the watchdog timer.
AR-B1462 User ¡¦ s Guide 5-10 NOTE: 1. If you program the watchdog to generate IRQ15 signal when it times out, you should initial IRQ15 interrupt vector and enable the second interrupt controller (8259 PIC) in order to enable CPU to process this interrupt.
AR-B1462 User ¡¦ s Guide 6-1 6. SOLID STATE DISK The section describes the various type SSD s ’ installation steps as follows. This chapter describes the procedure of the installation. The following topics are covered: l Overview l Switch Setting l Jumper Setting l ROM Disk Installation l DiskOnChip Installation 6.
AR-B1462 User ¡¦ s Guide 6-2 6.2.1 Overview There is 1 DIP Switch located on the AR-B1462. It performs the following functions: ON 123456789 1 0 OFF Figure 6 - 2 SW1: Switch Select SW1-1 Set the bas.
AR-B1462 User ¡¦ s Guide 6-3 6.2.4 SSD Drive Number (SW1-4 & SW1-5) The AR-B1462 SSD can simulate one or two disk drives. You can assign the drive letter of the AR-B1462 by configuring SW1-4 & SW1-5. You can make the computer to boot from SSD by copying DOS into the SSD.
AR-B1462 User ¡¦ s Guide 6-4 (2) Disk Drive Name Arrangement If any logical hard disk drives exist in your system, there will also be a different disk number depending on which version DOS you are using. The solid state disk drive number with there respective DOS drive designation are listed in table as follows.
AR-B1462 User ¡¦ s Guide 6-5 6.2.7 Serial Port 2 Mode Select (SW1-9 & SW1-10) SW1-9 & SW1-10 are used to select the interface mode of serial port2.
AR-B1462 User ¡¦ s Guide 6-6 M1, M2, M3, & M4 EPROM (128KX8, 256KX8 and 512KX8) 5V FLASH (64KX8, 128KX8 and 256KX8) (Factory Preset) 5V FLASH (512KX8 Only) SRAM M1, M2, M3, & M4 M1, M2, M3, .
AR-B1462 User ¡¦ s Guide 6-7 M1, M2, M3, & M4 EPROM (128KX8, 256KX8 and 512KX8) 1 2 3 A B C M1, M2, M3, & M4 1 2 3 A B C 1 2 3 JP8 1MX8 EPROM (Only) 1 2 3 JP8 Figure 6 - 5 UV EPROM Jumper Se.
AR-B1462 User ¡¦ s Guide 6-8 ON 123456789 1 0 OFF Figure 6 - 6 5V Large FLASH (29FXXX) Switch Setting M1, M2, M3, & M4 5V FLASH (64KX8, 128KX8 and 256KX8) (Factory Preset) 5V FLASH (512KX8 Only).
AR-B1462 User ¡¦ s Guide 6-9 Step 7: In the main menu, choose the <Load ROM File> item, that is the ROM_NAME=[file name] in the *.PGF file. Choose the <Program Memory> item, this item program will program the EPROMs. Step 8: NOTE: Move the reverse video bar to the <Program memory> option then press <ENTER>.
AR-B1462 User ¡¦ s Guide 6-10 (2) Using Tool Program If small page 5V FLASH EPROMs are used, it is the same procedure as step 1 to step 4 of using the UV EPROM: Step 1: Making a Program Group File (*.
AR-B1462 User ¡¦ s Guide 6-11 6.4.4 RAM Disk (1) Switch and Jumper Setting Step 1: Use jumper block to set the memory type as ROM (FLASH). Step 2: Select the proper I/O base port, firmware address, disk drive number on SW1. Step 3: Insert programmed SRAM chips into sockets starting at MEM1.
AR-B1462 User ¡¦ s Guide 6-12 6.4.5 Combination of ROM and RAM Disk The AR-B1462 can be configured as a combination of one ROM disk and one RAM disk. Each disk occupies a drive unit. Step 1: Use jumper block to select the proper ROM/RAM configuration you are going to use.
AR-B1462 User ¡¦ s Guide 6-13 (2) DiskOnChip Memory Address Setting (JP7) 1 6 4 2 5 3 MEM4=SSD JP7 1 6 4 2 5 3 MEM4=DOC JP7 Figure 6 - 11 JP7: DiskOnChip Memory Address Setting (3) Configuring the DiskOnChip as a Bootable Disk The DiskOnChip fully supports the BOOT capability.
.
AR-B1462 User ¡¦ s Guide 7-1 7. BIOS CONSOLE This chapter describes the AR-B1462 BIOS menu displays and explains how to perform common tasks needed to get up and running, and presents detailed explanations of the elements found in each of the BIOS menus.
AR-B1462 User ¡¦ s Guide 7-2 7.2 STANDARD CMOS SETUP The <Standard CMOS Setup> option allows you to record some basic system hardware configuration and set the system clock and error handling. If the CPU board is already installed in a working system, you will not need to select this option anymore.
AR-B1462 User ¡¦ s Guide 7-3 7.3 ADVANCED CMOS SETUP The <Advanced CMOS SETUP> option consists of configuration entries that allow you to improve your system performance, or let you set up some system features according to your preference. Some entries here are required by the CPU board ¡¦ s design to remained in their default settings.
AR-B1462 User ¡¦ s Guide 7-4 System Keyboard This function specifies that a keyboard is attached to the computer. Primary Display The option is used to set the type of video display card installed in the system. Password Check This option enables password checking every time the computer is powered on or every time the BIOS Setup is executed.
AR-B1462 User ¡¦ s Guide 7-5 Shadow These options control the location of the contents of the 32KB of ROM beginning at the specified memory location. If no adapter ROM is using the named ROM area, this area is made available to the local bus. The settings are: SETTING DESCRIPTION Disabled The video ROM is not copied to RAM.
AR-B1462 User ¡¦ s Guide 7-6 7.4 ADVANCED CHIPSET SETUP This option controls the configuration of the board ’ s chipset. Control keys for this screen are the same as for the previous screen. AMIBIOS SETUP - ADVANCED CHIPSET SETUP (C) 1996 American Megatrends, Inc.
AR-B1462 User ¡¦ s Guide 7-7 7.5 PERIPHERAL SETUP This section is used to configure peripheral features. AMIBIOS SETUP - PERIPHERAL SETUP (C) 1996 American Megatrends, Inc.
AR-B1462 User ¡¦ s Guide 7-8 7.7.1 Setting Password Select the appropriate password icon (Supervisor or User) from the Security section of the BIOS Setup main menu. Enter the password and press [Enter]. The screen does not display the characters entered.
AR-B1462 User ¡¦ s Guide 7-9 7.9.2 Exit Without Saving When you select this option, the following message will appear at the center of the screen to help to Abandon all Data and Exit Setup.
.
AR-B1462 User ¡¦ s Guide 8-1 8. SPECIFICATIONS & SSD TYPES SUPPORTED 8.1 SPECIFICATIONS CPU: Supports25 to 133 Mhz Intel / AMD / Cyrix / ST / IBM 486 CPU .
AR-B1462 User ¡¦ s Guide 8-2 SST 28EE010 (128Kx8, 1M bits) SST 28EE011 (128Kx8, 1M bits) SST PH29EE010 (128Kx8, 1M bits) WINBOND W29EE011 (128Kx8, 1M bits) ATMEL AT29C020 (256Kx8, 2M bits) ATMEL AT2.
AR-B1462 User ¡¦ s Guide 9-1 9. PL ACEMENT & DIMENSIONS 9.1 PLACEMENT 1 2 3 A B C M5 1 2 3 A B C 1 2 3 A B C A B C 1 2 3 A B C 1 2 3 1 2 1 1 2 A B C 3 2 1 1 2 2 4 6 8 1 H7 H11 H6 H3 12 5 GND CN6.
AR-B1462 User ¡¦ s Guide 9-2 9.2 DIMENSIONS 8−∅138 2900 3975 200 4700 1600 8000 7600 3150 3825 3875 145 200 Unit: mil (1 inch = 25.4 mm = 1000 mil).
AR-B1462 User ¡¦ s Guide 10-1 10. PROGRAMMING RS-485 & INDEX 10.1 PROGRAMMING RS-485 The majority communicative operation of the RS-485 is in the same of the RS-232.
AR-B1462 User ¡¦ s Guide 10-2 (5) Basic Language Example a.) Initial 86C450 UART 10 OPEN “ COM1:9600,m,8,1 ” AS #1 LEN=1 20 REM Reset DTR 30 OUT &H3FC, (INP(%H3FC) AND &HFA) 40 RETURN b.
AR-B1462 User ¡¦ s Guide 10-3 10.2 INDEX Name Function Page CN1 120-pin PCI connector 3-15 CN2 AUI connector 3-17 CN3 CPU cooling fan power connector 3-15 CN4 RS-232 connector 3-10 CN5 40-pin hard d.
Een belangrijk punt na aankoop van elk apparaat Acrosser Technology 486DX, 486DX2, 486DX4 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Acrosser Technology 486DX, 486DX2, 486DX4 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Acrosser Technology 486DX, 486DX2, 486DX4 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Acrosser Technology 486DX, 486DX2, 486DX4 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Acrosser Technology 486DX, 486DX2, 486DX4 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Acrosser Technology 486DX, 486DX2, 486DX4 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Acrosser Technology 486DX, 486DX2, 486DX4 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Acrosser Technology 486DX, 486DX2, 486DX4 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
