
Do not expose battery packs to naked flame!
We declare under our sole responsibility: These cordless drill / screwdriver, identified by type and serial number *1), comply with all relevant requirements of the directives *2) and standards *3). Technical file at *4) - see page 3.
Do not open battery packs! Do not touch or short-circuit battery packs! Remove the battery pack from the machine before any adjustment or maintenance is carried out. Before fitting the battery pack, make sure that the machine is switched off. Keep hands away from the rotating tool! Remove chips and similar material only with the machine at standstill. Dust from material such as paint containing lead, some wood species, minerals and metal may be harmful. Contact with or inhalation of the dust may cause allergic reactions and/or respiratory diseases to the operator or bystanders. Certain kinds of dust are classified as carcinogenic such as oak and beech dust especially in conjunction with additives for wood conditioning (chromate, wood preservative). Material containing asbestos must only be treated by specialists. - Where the use of a dust extraction device is
The cordless drill/driver is suitable for screwing, drilling and thread cutting. The user bears sole responsibility for any damage caused by improper use. Generally accepted accident prevention regulations and the enclosed safety information must be observed.
For your own protection and for the protection of your electrical tool, pay attention to all parts of the text that are marked with this symbol! WARNING – Reading the operating instruc- tions will reduce the risk of injury.
possible it shall be used. - The work place must be well ventilated. - The use of a dust mask of filter class P2 is
recommended. Follow national requirements for the materials you want to work with. LED lights (2): Do not observe the LED radiation directly with optical instruments.
See page 2.
1 Chuck * 2 LED lights 3 Adjusting sleeve (torque control, maximum torque) 4 Slide-switch (1st/2nd gear) 5 Battery indicator to check the battery's charge level 6 Belt hook 7 Rotation selector switch (direction of rotation setting, transporting safety device) 8 Trigger 9 Battery pack release button 10 Battery pack 11 Protective cap * * depending on model
Hold tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring. Cutting accessory contacting a "live" wire may make exposed metal parts of the electrical tool "live" and could give the operator an electric shock. Ensure that the spot where you wish to work is free of power cables, gas lines or water pipes (e.g. using a metal detector).
Slightly acidic, flammable fluid may leak from defective Li-ion battery packs!
If battery fluid leaks out and comes into contact with your skin, rinse immediately with plenty of water. If battery fluid leaks out and comes into contact with your eyes, wash them with clean water and seek medical attention immediately.
6.1 The machine's multifunctional monitoring system
Protect battery packs from water and moisture!
If the machine switches off automatically, the machine electronics have activated automatic
Do not use faulty or deformed battery packs!
ENGLISH en

protection mode. A warning signal sounds (continuous beeping). The beeping stops after a maximum of 30 seconds or when the trigger is released (8).
1...20 = Torque setting (with torque control) - intermediate positions are also possible.
= Drilling stage setting (max. torque,
without torque control) To avoid motor overloading, do not lock the spindle.
In spite of this protective function, overloading is still possible with certain applications and can result in damage to the machine.
Causes and remedies:
6.6 Switching power tool on/off, setting
speed To start the machine, press the trigger (8). The speed can be changed by pressing in the trigger.
6.7 Chuck with Quick replacement system (for PowerMaxx BS Quick...) To remove: See page 2, fig. A. Push the interlock ring forward (a), advance and pull off the chuck (b). To mount: Push the interlock ring forward and move the chuck as far as the limit stop on the drill spindle.
6.8 Chuck (for PowerMaxx BS) See page 2, fig. B. To mount: unscrew protective cap (11). Screw the quick-clamping chuck onto the spindle thread. The quick-clamping chuck can be tightened (and released again) with an open-jawed spanner.
6.2 Battery pack Charge the battery pack before use.
When working with long screw bits or bit holders, we recommend the use of the bit clamping bush 6.31281 (see Accessories chapter).
If performance diminishes, recharge the battery pack.
The ideal storage temperature is between 10°C and 30°C.
Removing the battery pack Press the battery pack release (9) button and remove the battery pack (10).
Use only genuine Metabo accessories. If you need any accessories, check with your dealer. For dealers to select the correct accessory, they need to know the exact model designation of your power tool. See page 4.
To fit Slide in the battery back (10) until it engages .
6.3 Setting the direction of rotation, engaging the transporting safety device (switch-on lock) Do not activate rotation selector switch (7) unless the motor has completely stopped! Actuate the rotation selector switch (direction of rotation setting, transporting safety device) (7). See page 2. R = Clockwise setting L = Counter-clockwise setting 0 = Middle position: transportation safety device (Switch-on lock) set
A Quick-clamping chuck.
Fitting, PowerMaxx BS: unscrew protective cap (11). Screw the quick-clamping chuck onto the spindle thread. The quick-clamping chuck can be tightened (and released again) with an open-jawed spanner. B Battery pack C Angle screwdriver attachment. D Battery charger
E Bit clamping bush F Bit holder with Quick replacement system G Bit box For a complete range of accessories, see www.metabo.com or the main catalogue.
6.4 Selecting gear stage
1st gear (low speed, particularly high torque, preferable for screwing)
2nd gear (high speed, preferable for drilling)
Repairs to electrical tools must be carried out by qualified electricians ONLY!
6.5 Setting torque control, drilling Turn selector barrel (torque, drilling) (3).
ENGLISH en

If you have Metabo electrical tools that require repairs, please contact your Metabo service centre. For addresses see www.metabo.com
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but not actually doing the job. This can considerably reduce the vibratory load over the entire working period.
You can download spare parts lists from www.metabo.com
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of work patterns.
Observe national regulations on environmentally compatible disposal and on the recycling of disused machines, packaging and accessories. Battery packs must not be disposed of with regular waste. Return faulty or used battery packs to your Metabo dealer! Do not allow battery packs to come into contact with water!
A-effective perceived sound levels: LpA =Sound pressure level LWA =Acoustic power level KpA, KWA= Uncertainty (noise level)
Measured values determined in conformity with EN 60745.
To protect the environment, do not dispose of power tools or battery packs in household waste. Observe national regulations on separated collection and recycling of disused machines, packaging and accessories. Before disposal, discharge the battery pack in the power tool. Prevent the contacts from short- circuiting (e. g. by protecting them with adhesive tape).
Direct current The technical specifications quoted are subject to tolerances (in compliance with the relevant valid standards).
Explanatory notes on the specifications on page 3. Changes due to technological progress reserved. U =Voltage of battery pack n =No-load speed
Tightening torque for screwing: MA =soft screwing application (wood) MB =hard screwing application (metal) MC = adjustable torque (with torque control)
m =Weight (with battery pack) G =Spindle thread
Vibration total value (vector sum of three directions) determined in accordance with EN 60745: ah, D =Vibration emission value (drilling into
metal) ah, S =Vibration emission level (screwing without
impact) Kh, ... =Uncertainty (vibration) The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. It is also suitable for a provisional estimate of the vibratory load.
The specified vibration level applies to the main applications of the power tool. However, if the tool is used for other applications, with different accessories or is poorly maintained, the vibration level may vary. This can considerably increase the vibratory load over the entire working period.
ENGLISH en · Wear ear protectors!
Pagina's waarnaar wordt verwezen in deze handleiding — fabrikant, ondersteuning en downloads.
Eigenaren en ons team reageren doorgaans binnen een dag — en uw vraag helpt ook de volgende persoon.
Stel als eerste een vraag — andere eigenaren of ons team geven antwoord.