Gebruiksaanwijzing /service van het product F1 van de fabrikant Canon
Ga naar pagina of 30
Paper Folding Unit-F1 Operating information Océ User Manual.
Copyright Copyright 2011 by Canon Inc. All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or by any information storage or retrieval system without the prior written permission of Canon Inc.
Contents Chapter 1 Preface ................................................................................................................. 5 Notes for the reader................................................................................... 6 Naming conventions for finishers (commercial naming and naming in User Interfaces).
4 Contents.
Chapter 1 Preface.
Notes for the reader Introduction This manual helps you to use the Paper Folding Unit-F1. The manual contains a descrip- tion of the product and guidelines to use and operate the Paper Folding Unit-F1. Definition Attention-Getters Parts of this manual require your special attention.
Indicates Icon Word Ignoring this warning could cause injury or damage to property. Caution Indicates additional important information. Note The use of heat-resistant gloves is mandatory when you carry out these actions.
Naming conventions for finishers (commercial naming and naming in User Interfaces) Hardware and hardware naming in User Interfaces To improve the readability of texts in User Interfaces of operator panels and software, the finishers are generally referred to by their function.
Chapter 2 Use the folder.
The main parts of the folder Note: The folder (Paper Folding Unit-F1) can only be used in combination with the stack- er/stapler (Finisher-AF1/Saddle Finisher-AF2). Illustration [10] Main parts of the folder Components and their functions Main parts of the folder # Function Component Open this door to remove jammed paper.
The folding modes Overview of the folding modes The folder supports the following folding modes. Folding modes # Remarks Illustration Folding mode Only Z-folded A4R, LetterR and Legal sheets can be sent to the folder output tray. Z-folded A3, B4 and 11" x 17" sheets must be sent to the output trays of the stacker/stapler.
Legend for the above illustration # Translation English text Leading Edge Length Leading Edge Length Feeding Direction Feeding Direction Overview of the Z-folded areas # Remarks Feeding method If paper that has been Z-folded is includ- ed in the output, the sheets may not be aligned when output.
Legend for the above illustration # Translation English text Leading Edge Length Leading Edge Length Feeding Direction Feeding Direction Overview of the tri-fold in areas # Remarks Feeding method Platen glass = Glass plate Feeder = ADF Tri-fold out The illustration below shows the feeding direction and fold method.
Legend for the above illustration # Translation English text Leading Edge Length Leading Edge Length Feeding Direction Feeding Direction Overview of the tri-fold out areas # Remarks Feeding method Platen glass = Glass plate Feeder = ADF Double parallel fold The illustration below shows the feeding direction and fold method.
Legend for the above illustration # Translation English text Leading Edge Length Leading Edge Length Feeding Direction Feeding Direction Overview of the double parallel fold areas # Remarks Feeding me.
Chapter 2 - Use the folder 16 The folding modes.
Chapter 3 Troubleshooting.
Labels inside the folder Introduction If a paper jam occurs in the folder (Paper Folding Unit-F1), the operator panel will display the location of the paper jam and a procedure to clear the paper jam. Follow the procedure on the operator panel to clear the paper jam.
[24] Front Cover = Front cover Overview of the error locations and their labels The table below describes the error locations in the order these must be checked in gen- eral. Depending on the paper jam, the order to check the error locations can be different.
Clear a paper jam in the folder Introduction If a paper jam occurs in the folder, the operator panel will display the location of the paper jam and a procedure to clear the paper jam. Follow the procedure on the operator panel to clear the paper jam. The procedure below describes how to clear a paper jam in the folder.
Illustration Action Step Turn the dial (M-A3) in the di- rection of the arrow (counter- clockwise). 3 Remove any jammed paper. 4 Pull out the paper folding unit (M-B1).
Illustration Action Step When there is a paper jam in the inside guide When there is a paper jam in the outside guide Remove any jammed paper. 7 Close the left-hand guide (M- B2). WARNING When you close the guide, be careful not to get your fingers caught, as this may result in per- sonal injury.
Illustration Action Step When there is a paper jam in the inside guide When there is a paper jam in the outside guide Remove any jammed paper. 10 Close the right-hand guide (M- B3). WARNING When you close the guide, be careful not to get your fingers caught, as this may result in per- sonal injury.
Illustration Action Step Remove the jammed paper. 13 Return the paper folding unit (M-B1) to its original position. WARNING When you return the paper folding unit to its original posi- tion, be careful not to get your fingers caught, because this may result in personal injury.
Illustration Action Step Follow the instructions on the operator panel. 18 Chapter 3 - Troubleshooting 25 Clear a paper jam in the folder.
Chapter 3 - Troubleshooting 26 Clear a paper jam in the folder.
Appendix A Specifications.
Specifications Paper Folding Unit-F1 Note: Whenever a number of sheets is mentioned in the table below, the figure is based on media of 80 g/m² (20 lb Bond). Specifications of Paper Folding Unit-F1 # Specification Item Integrated folding unit that comes optional in combination with Finisher-AF1 or Saddle Finisher- AF2.
Specification Item From Finisher-AF1/Saddle Finisher-AF2 Power source Appendix A - Specifications 29 Specifications.
Index Conversion table for commercial names and user interface names Conversion table for commercial names and user interface names ................................................. 8 E Error locations Error locations .................................
Een belangrijk punt na aankoop van elk apparaat Canon F1 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Canon F1 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Canon F1 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Canon F1 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Canon F1 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Canon F1 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Canon F1 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Canon F1 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
