Gebruiksaanwijzing /service van het product IP ReadyTM Series Video Alarm FDP75C12N van de fabrikant Canon
Ga naar pagina of 24
- 1 - Before attempting to connect or operate this product, please read these instructions completely. Product Instructions IP Ready ™ Series FDW75C12N & FDP75C12N 81-IN5329 04/28/06.
! Caution Risk of ElECtRiC shoCk! Caution: to REDuCE thE Risk of ElECtRiCal shoCk, Do not EXPosE C oMPonEnts to WatER oR MoistuRE. safEtY PRECautions iMPoRtant safEGuaRDs 1. Read Instructions - All the saf ety and operating instructions should be r ead befor e the unit is operated.
- 3 - ! ! ELECTRICAL SPECIFICATIONS (OUTDOOR ONLY): Power 12Vdc, Class 2 Only T otal Power: 21 watts Housing only Accessories (Heater/Blower): 21 watts Heater: 20 watts Blower: 1 watt NOTE: This unit is designed for operation in an upright position.
- 4 - INSTALLATION OF PTZ CAMERA See model for specic instruction. Listed on the following pages are the specic instructions for each of the individual network cameras.
- 5 - INSTALLING QUICK RELEASE BRACKETS AXIS 213 2539 Mounting Plate: 1. Install the camera to the 2539 mounting plate using (2) 10-32 screws and lockwashers provided. 2. The Axis 213 camera requires 3.5" of spacing for optimal position within the housing.
- 6 - INSTALLING QUICK RELEASE BRACKETS AXIS 214 2685 Mounting Plate: Attach camera using these (3) holes 1. Install the AXIS 214 camera to the 2685 mounting plate using the (3) 3mm x 12mm bolt and lock washers provided. 2. The AXIS 214 camera requires 2” of spacing for optimal position within the housing.
- 7 - INSTALLING QUICK RELEASE BRACKETS CANON VB-C10R 2539 Mounting Plate: 1. Install the camera to the 2539 mounting plate using (2) 10-32 screws and lockwashers provided. 2. The Canon VB-C10R camera requires 4" of spacing for optimal position within the housing.
- 8 - INSTALLING QUICK RELEASE BRACKETS CANON VB-C50iR 2539 Mounting Plate: 1. Install the camera to the 2539 mounting plate using (2) 10-32 screws and lockwashers provided. 2. The Canon VB-C50iR camera requires 3.5" of spacing for optimal position within the housing.
- 9 - INSTALLING QUICK RELEASE BRACKETS CANON VC-C4R / VC-C50iR 2539 Mounting Plate: 1. Install the camera to the 2539 mounting plate using (2) 10-32 screws and lockwashers provided. 2. The Canon VC-C4R / VC-C50iR camera requires 4" of spacing for optimal position within the housing.
- 10 - INSTALLING QUICK RELEASE BRACKETS ELMO PTC-200C Mounting plate for this unit is included in the housing packet. Remove existing mounting plate installed in the unit before proceeding. 2539 Mounting Plate: 1. Place the camera onto the quick release bracket using the (4) metric 3M Phillips head screws provided with the kit.
- 11 - INSTALLING QUICK RELEASE BRACKETS ELMO PTC-201 Mounting plate for this unit is included in the housing packet. Remove existing mounting plate installed in the unit before proceeding. 2539 Mounting Plate: 1. Place the camera onto the quick release bracket using the (4) metric 3M Phillips head screws provided with the kit.
- 12 - INSTALLING QUICK RELEASE BRACKETS ELMO PTC-400C Mounting plate for this unit is included in the housing packet. Remove existing mounting plate installed in the unit before proceeding. 2539 Mounting Plate: 1. Place the camera onto the quick release bracket using the (4) metric 3M Phillips head screws provided with the kit.
- 13 - INSTALLING QUICK RELEASE BRACKETS ELMO PTC-401 Mounting plate for this unit is included in the housing packet. Remove existing mounting plate installed in the unit before proceeding.
- 14 - INSTALLING QUICK RELEASE BRACKETS JVC VN-C30U 2539 Mounting Plate: 1. Remove the mounting plate from the camera and place it onto the quick release bracket using the (3) metric 3M Phillips head screws provided with the kit. Then place the mounting plate back onto the JVC VN-C30U.
- 15 - ½" 1" 2" INSTALLING QUICK RELEASE BRACKETS P ANASONIC BB-HCM381 / KX-HMC280 2539 Mounting Plate: Attach camera using this hole 1. Install the camera to the 2539 mounting plate using the ¼ x 20, washer and lockwasher provided. 2.
- 16 - ½" INSTALLING QUICK RELEASE BRACKETS PIXORD 261 / 262 2630 Mounting Plate: 1. Install the camera to the 2630 mounting plate using the (3) 8 x 32 x .5 at head screws, nuts and washers provided. 2. The PIXORD 261/262 cameras require ½“ of spacing to properly position the camera within the housing.
- 17 - INSTALLING QUICK RELEASE BRACKETS SONY SNCRZ30 2539 Mounting Plate: 1. Attach the camera to the 2539 mounting plate using the (1) ¼ x 20 bolt, washer and lockwasher provided. 2. The SNCRZ30 require 2” of spacing to properly position the camera within the housing.
- 18 - INSTALLING QUICK RELEASE BRACKETS SONY SNCRZ50 2539 Mounting Plate: 1. Attach the SNCRZ50 camera to 2539 mounting plate using 3mm x 8mm bolt lockwashers provided. 2. The SONY SNCRZ50 require 2 ½ ” of spacing to properly position the camera within the housing.
- 19 - INSTALLING QUICK RELEASE BRACKETS TOSHIBA IK-WB21A 2539 Mounting Plate: 1. Remove the quick release bracket from the camera. Using (4) 8 x 32 x 3/8 bolts and star washers attach the quick release place to the 2539 mounting plate. 2. The T oshiba 1K-WB21A requires 3” of spacing to properly position the camera within the housing.
- 20 - WIRING INSTRUCTIONS Wiring Color Code Power and Control Inputs RJ45 BNC (Large) Power (Small) Alarms AFTER CAMERA INSTALLATION Make inside housing wiring connections following Chart B below.
- 21 - 3. Mount the housing assembly to the mounting bracket and housing coupling. A safety cable is included with the housing to temporarily hold it while making wiring connections. Loop the safety cable over one of the set screws on the housing coupling and make the appropriate connections using the (2) screw-down connectors supplied.
- 22 - Exploded View for Replacement Parts 1 11 6 9 10 1 1 1 2 3 5 4 7 8 14 16 6 12 13 18 (1) (1) (3) (2) (2) (2) (8) (4) (2) (1) (1) (4) (4) (1) (3) (4) (3) (3) (1) (1) (4) (4) (1) (1) (4) (4) 19 17 .
- 23 - Part Number Description 1 RPFD7501 LOWER TRIM RING 2 FD7T TINTED REPLACEMENT CAPSULE FD7C CLEAR REPLACEMENT CAPSULE 3 RPFD703 DOME CLAMPING BRACKET 4 RPFD072 24 VAC HEATER 5 RPFD080 (12 VDC) BL.
- 24 - 2.000 3.250 R .733 2.132 2.981 1.537 5.500 Mounting Template.
Een belangrijk punt na aankoop van elk apparaat Canon IP ReadyTM Series Video Alarm FDP75C12N (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Canon IP ReadyTM Series Video Alarm FDP75C12N heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Canon IP ReadyTM Series Video Alarm FDP75C12N vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Canon IP ReadyTM Series Video Alarm FDP75C12N leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Canon IP ReadyTM Series Video Alarm FDP75C12N krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Canon IP ReadyTM Series Video Alarm FDP75C12N bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Canon IP ReadyTM Series Video Alarm FDP75C12N kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Canon IP ReadyTM Series Video Alarm FDP75C12N . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
