Gebruiksaanwijzing /service van het product 747 van de fabrikant 3M
Ga naar pagina of 40
Digital Data Manager Model 747 Installation and Setup Guide Version 3. xx Software 3M Library Systems 3M Center, Building 225-4N-14 St. Paul, MN 55144-1000 www.
© 3M 2011. All rights reserved. Digital Data Manager Model 747 Installation and Set up Guide 78-8123-904 5-4, R e v. D 3M is a trademark of 3M. Adobe and Acrobat are regi stered trademarks of Adobe Systems Incor porated.
Installation and Setup Contents Introduction .................................................................................... 1 About Data Manag er ...................................................................................................
Step 7 – Test your export formats ................................................ 18 Step 7.1– Debug your export formats ........................................................................................ 18 Step 7.2 – Export lists and check for errors and warnings .
3M™ DATA MANAGER MODEL 747 SOFTWARE LICENSE Use of the 3M Data Manager Model 747 Soft ware (“Software”) is governed by the terms of the license between 3M and Customer.
© 3M 2011. All rights reserved. 7. Term and Termination. This License will terminate (i) if eit her party materially breaches a provision of this License and fails to cure such breach within thirty (30) days after receiving a written notice of breach from the nonbreaching party; or (i i) if Customer discontinues us e of the Software.
Introduction About Data Manager 3M TM Digital Data Manage r (Data Mana ger) software is used to transfer information between your circulatio n sy stem and 3M equipment such a s the 3M TM Digital Library Assi st ant (DLA).
Installation and setup overview The steps required to instal l Data Mana ger 3. xx software will vary depending upon the installation type. See the descriptions belo w for an overview of installation proc edures. Data Manager installation and setup should be perfo rmed by someone having in-depth knowl edge of t he library’s circul ation system.
Step 1 – Install Data M anager and DLA software Computer requirements Before you install Data Manager software, make sure that your com puter meets the following require ments: Computer Requirements.
Installing Data Manager software If an older version of Data Manager software (v2.0 or higher) i s installed on your computer, installing version 3.2 (or hi gher) will remove the older version and migrate your settings and formats to the new version. Database files reside in these locations: • Version 3.
4 Click Next to begin installing Data Mana ger software. 5 Click Next at each screen to follow the installation instructions. For a typical installation, accept the default s etting s on each screen. 6 On the final screen, click Finish to complete the installation.
6 © 3M 2011. All rights reserved. Step 2 – Install memory-card drive (new drive only) Before you begin The procedures that follow are only for users with new memory- card drives. If you are already using a drive delivered with a previous version of Data Manager, installing the ne w drive is not required.
Step 2.2 - Check the memory -card drive’s operation Procedure 1 After Windows installs t he memory-card drivers, double-click the My Computer icon on the de skto p. 2 Two new drive icons called Rem ovable Disk appear in the My Computer window. (Se e Figure 1 .
Removing a memory card IMPORTANT! Always use the followi ng procedure to remove the memory card from the memory-card drive. You must have “eject” privilege s to remo ve the memory card. DO NOT remove a memory card while the activity light on the memory-card drive is flashing.
Step 3 – Determine import/ export format requirements Use the 3M TM Digital Data Manager Model 747 Data Format Guide for step-by-step information on setting up Data Manager parameters. These parameters (such as import/export format s and barcode validation) depend on the forma t of the text files that you generate from your circulation system.
Step 4 – Create list folders Before you can use Data Manager, you must create Shelf Order List , Search List , and Pull List folders. Once created, you can config ure Data Manager to display the contents of these folders. Data Manager software uses list s that are sto red in th ese fold ers only.
Step 4.3 – Start Data Manager software 1 Double-click the 3M Data Manager icon on your PC desktop. - or - Use the Start button (located on the Windows task bar) to start Data Manager software. The Data Manager main scre en appears. 2 Enter Admin Setup .
Step 4.4 – Specify list folder and export/import locations 1 Insert a memory card into the memory-card d rive. 2 Start Data Manager software. 3 From the Admin Setup menu, click Fol ders . The Folders dialog box appears. 4 From the Folders dialog box, specify the locations for the folders that y ou created earlier.
Step 5 – Define list bar code validation parameters Step 5 – Define list bar code validation parameters Barcode validation parameters are used to validate the barcode d ata in the list files generated from your circulation system. Records with invali d barcodes are not exported and will gene rate an export error.
Step 6 – Set export parameters Export formats must be assigned to a list file before the list file can be exported onto a memory card for use by the DLA or other equipm ent. See the Data Format Guide for detailed descriptions and examples of various export formats.
Step 6.1 – Create export formats Step 6.1 – Create export formats The Data Format Guide includes detailed description s and examples of export-format parameters . 15 To create export formats 1 From the Admin Setup menu, cli ck Ex port Formats . The Export Formats dialo g box appears.
Designating a default export format (optional) If you set default export formats, Data Manager assigns the default export format to any new list file that you add to a list folder. List files that you move into the Shelf Order Lists folder are assigned the Order Defaul t e x port format.
Step 6.2 – Set up Duplicate It em Definitions (optional) Step 6.2 – Set up Duplicate It em Definitions (optional) Duplicate item checking is helpful if your library has groups of item s (each item.
Step 7 – Test your export formats Step 7.1– Debug your export formats Follow thi s procedure wh enever you create a new export format or edit an existing export format. To preview the file export 1 Select a list file from the main window. 2 Apply an export format to the list file.
Step 7.2 – Export lists and check for errors and warnings Step 7.2 – Export lists and check for errors and warnings Once you have set up export paramet ers and previewed the exp o rt, you can export the list files and check for any errors and warni ngs.
About debugging export errors and warnings You should have debugged your export formats in Step 7.1– Deb ug your export formats on page 18 . As you begin to use Data Man ager to ex port data, you will occasi onally encounter errors and warnings. If you encounter excessive errors and warnings There may still be problems with your ex port formats.
Step 7.3 – View the exp orted lists on the DLA or other equipment The final check of an export format requires that you view the exported information on the 3M equipment wh ere the lists will be displ ayed. 1 Insert the memory card into the DLA (or other equipment).
Step 8 – Set import parameters You must set up import formats and expo rt collection categ ory labe ls to a memory card before attempting to use the DLA to collect data. These collection category lab els are exported to a memory card for use by the DLA.
Step 8.1 – Create and preview import formats Step 8.1 – Create and preview import formats Data Manager imports the Item IDs from a collection category and/or Pull-list Results and converts them into text files. An Import Format defines how these text files are formatted.
Step 8.2 – Create co llection categories You can create collection categori es fo r variou s tasks. For example, you might create an “in-house” collection category where you save the Item IDs for each in-house item that you read with the DLA. 1 From the Data Manager List Ac tions menu, click Add Category to display the Add Category window.
Step 8.3 - Export collection-categor y labels to the memory card Step 8.3 - Export collection-categor y labels to the memory card Before you can use the DLA’s Collect Data function, you must export collection-category labels to a memory card. (See the Staff Guide for detailed descriptions of the export procedure.
Step 8.4 – Test your import formats The final test for your import formats requires using th e DLA to collect Item IDs, importing the collected Item IDs, and verifying that your ci rculation system accepts the formatted text files created by Data Manager.
Optional Procedures Specifying language settings (optional) The administrator can specify which lan g uages that staff will be able to select. To select which languages will be available in the View Languages menu 1 Enter the Administrator password to access the Admin Setup menus.
28 © 3M 2011. All rights reserved. Designating a default export format (optional) If default export formats are set, Data Manager a ssi gns the default export format to any new list file that you move into either list folder. List files that are moved into the Shelf Order Lists folder are assigned the Order Defaul t export format.
Designating a default import format (optional) Designating a default import format (optional) When you add a category, the default import format automatically appears in the Import Format text box (see Figure 3 3 ). Data Manager creates default import formats [( +) Pulled and (-) Not-Pulled ] that are always used for pull-list results.
30 © 3M 2011. All rights reserved. Using command-line scripts to aut omate Data Manager (optional) As shown on page 32, Data Manager in cludes a set of command-line paramete rs that can be used to automate program functions and operations.
If Data Manager is installed on a Windows 7 computer: If Data Manager is installed on a Windows 7 computer: 1 In the Start menu, go to Accessories > Sy stem Tools and then select Task Scheduler . The Task Scheduler window app ears. 1 In the Start menu, go to Accessories > Sy stem Tools and then select Task Scheduler .
32 © 3M 2011. All rights reserved. Command-line operations and arguments The following command-lin e parameters can be used to automate Digital Data Manager functions. Multiple commands in a script must be separated by spaces . (See following page for erro r cod es and messages.
© 3M 2011. All rights reserved. 33 Command-line error codes and messages The codes listed below appear when command-line operatio ns or arguments are used to automate Digital Data Manager ope ratio ns. Note that any non-zero code indicates an erro r.
34 © 3M 2011. All rights reserved. 3M Service Information to gather Before you call for service, please have the following informatio n available: • The name, address, and telephone nu mber of your.
Een belangrijk punt na aankoop van elk apparaat 3M 747 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen 3M 747 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens 3M 747 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding 3M 747 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over 3M 747 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van 3M 747 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de 3M 747 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met 3M 747 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
