NL
3M logo
Officiële handleiding

3M MP7720

34 pagina's·1.5 MB·Projector·PDF·EN
3M MP7720
Inhoudsopgave 55 secties MP7720 Personal Projector · English User’s Guide · · · … TonenVerbergen
Page 1 of the 3M MP7720 user manual — MP7720 Personal Projector
Pagina 1 · klik om te vergroten
Pagina 1

MP7720 Personal Projector

English User’s Guide

3M MP7720 — MP7720 Personal Projector diagram (page 1)
Afb. 1 · MP7720 Personal Projector

1 3M™ Multimedia Projector MP7630 © 3M IPC 2000

Page 2 of the 3M MP7720 user manual — MP7720 Personal Projector
Pagina 2 · klik om te vergroten
Pagina 2

3M™ Multimedia Projector MP7630 2 © 3M IPC 2000

Page 3 of the 3M MP7720 user manual —
Pagina 3 · klik om te vergroten
Pagina 3

INTRODUCTION - 1

Safety Instructions -1 Warranty -2

Limited Warranty - 2 Shipping Contents -3 Optional Accessories -4 Projector Description -4

Projector - 4 External Control Panel - 5 Projector Features - 6 Remote Control Description -7

Remote Control Features - 7 Installing or Replacing Batteries - 9 INSTALLATION - 10

Screen Size -10 Connecting to Various Equipment -10 OPERATION - 11

Start Up -11 Digital Keystone Correction -12 Auto Adjustment -12 Source Selection -13 Menu System -13

1. Display Menu - 14 2. Image Menu - 15 3. Image Sub-menu with AV Input - 17 4. Control Menu - 17 5. Source Menu - 20 Shutdown -21 MAINTENANCE - 22

Lamp Information -22

Use and Replacement of Lamp - 22 Status LED Indicators - 22 Lamp Replacement -23 Resetting Lamp Hours -24 Service information -25

Accessories (Included in standard packet) - 25 Description of Part Number (Not Included in Standard Packet) - 25 Ordering Parts or Getting Information - 25 TROUBLESHOOTING - 26

Common Problems & Solutions -26 Status Messages -27 SPECIFICATIONS - 28

Projector specifications -28 Timing chart -29 DIMENSIONS- 30

iii 3M™Personal Projector MP7720 © 3M IPC 2000

Page 4 of the 3M MP7720 user manual — Safety Instructions
Pagina 4 · klik om te vergroten
Pagina 4

Safety Instructions

1. Read all of these instructions before you operate your projector and save them for future reference.
2. The lamp becomes extremely hot during operation. Keep the projector cool for approximately 45 minutes prior to removing the lamp assembly for replacement. Do not operate lamps beyond the rated lamp life. Excessive operation of lamps beyond rated life could cause them to explode in rare occasions.
3. Power is still available when the projector is in the standby mode. Never replace lamp assembly or any electronic components unless the projector is unplugged.
4. To reduce the risk of electric shock, do not disassemble this appliance. Take it to a qualified technician when service or repair work is required. Incorrect reassembly can cause electric shock when the appliance is subsequently used.
5. Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious damage to the product.
6. This product is capable of displaying inverted images for ceiling mount configurations. Please use suitable equipment for mounting the unit and make sure it is securely installed.
7. To prevent the lamp from bursting, change the lamp after changing the mounting position of the projector (desktop to ceiling mount or ceiling mount to desktop mount).
  • Caution
  • Always open the lens shutter or remove the lens cap when the projector lamp is on.
  • Do not look straight at the projector lens during operation. The intense light beam may damage your eyesight.
  • In some countries, the line voltage is NOT stable. This projector is designed to operate safely within a bandwidth of 110 to 230 volts, but could fail if power drops or surges of ± 10 volts occur. In these high-risk areas, it is recommended to install a power stabilizer unit.

Save These Instructions: The information contained in this manual will help you operate and maintain your 3M™MP7720 Personal Projector.

Page 5 of the 3M MP7720 user manual — Limited Warranty
Pagina 5 · klik om te vergroten
Pagina 5

Warranty

Limited Warranty

3M warrants this product against any defects in material and workmanship, under normal usage and storage, for a period of two years from date of purchase.

Exclusion to Warranty: The lamps are considered a consumable item and are warrantied for 90 days or 180 hours, whichever occurs first. Proof of purchase date will be required with any warranty claim. In the event this product is found to be defective within the war- ranty period, 3M’s only obligation and your exclusive remedy shall be replacement of any defective parts (labor included). To obtain warranty service, immediately notify the dealer from which you purchased the product of any defects.

FCC STATEMENT - CLASS A: This equipment generates, uses and can radiate radio fre- quency energy, and if not installed and used in accordance with the instruction manual, may cause interference to radio communications. It has been tested and found to comply with the limits for a Class “A” computing device pursuant to Subpart B of Part 15 of the FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference, in which case the user at his/her own expense will be required to take whatever measures may be required to correct the interference.

FCC STATEMENT - CLASS B: This equipment generates, uses and can radiate radio fre- quency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equip- ment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

— Reorient or relocate the receiving antenna.

— Increase the distance between the equipment and receiver.

— Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

— Consult the dealer or an experienced radio/TV technician for help.

EEC STATEMENT: This machine was tested against the 89/336/EEC (European Economic Community) for EMC (Electro Magnetic Compatibility) and fulfills these requirements.

Page 6 of the 3M MP7720 user manual — 220V 240V 110V
Pagina 6 · klik om te vergroten
Pagina 6

Shipping Contents

The 3M™MP7720 Projector is shipped with the necessary cables required for standard PC, Macintosh or laptop computer connections. Carefully unpack and verify that you have all of the items shown below. If any of these items are missing, please contact your place of purchase.

3M MP7720 — Shipping Contents diagram (page 6)
Afb. 2 · Shipping Contents

Ventilation Hole Projection Lens

3M MP7720 — Shipping Contents diagram (page 6)
Afb. 3 · Shipping Contents

S-video cable VGA cable

3M MP7720 — Shipping Contents diagram (page 6)
Afb. 4 · Shipping Contents

220V 240V 110V

3M MP7720 — 220V 240V 110V diagram (page 6)
Afb. 5
Show 7 more labels / short text on this page
Battery · Remote Control · RCA cable · Power code · Audio cable · Soft carry case ·
Page 7 of the 3M MP7720 user manual — Shipping Contents
Pagina 7 · klik om te vergroten
Pagina 7
Page 7 of the 3M MP7720 user manual — Shipping Contents
Page 8 of the 3M MP7720 user manual — External Control Panel
Pagina 8 · klik om te vergroten
Pagina 8

External Control Panel

3M MP7720 — External Control Panel diagram (page 8)
Afb. 6 · External Control Panel

Auto source Lamp Status Indicator

  • The External Control Panel is located on the top of the projector, near the rear.
  • The Infrared Remote Receiver (Front and Rear) allows the projector to accept signals from the remote control. For best results, be sure to aim the control toward this sensor, without any obstructions between the two, and at a distance no greater than 6 meters/19 feet.
  • The Menu button will display the menu system onscreen. Press Menu again to access the sub-menus. The Left and Right buttons help you navigate among choices and settings in the menus and sub-menus. However, when the onscreen menu is not active, the Left and Right buttons will function as Keystone +/- hot keys.
  • Press the Exit button to go back to the main menu. Press Exit again to leave the menu system.
  • The Status Indicator will blink or light up when the lamp needs service, cooling or replacement. See “Status Messages” on page 27. for more detailed information.
  • When the projector is turned on, the back-lit Power button will blink during warm-up and lamp ignition, then stay green to indicate the projector is ready for use.
  • Press the Power button for 1 second to turn the projector on or off.
  • Auto key: Automatically fit in the best picture quality for current received signals.
  • Source key: Select signal sources, PC/ RCA/S-video.
Show 6 more labels / short text on this page
Exit · Left/Keystone · Right/Keystone · Menu · Power ·
Page 9 of the 3M MP7720 user manual — Projector Features
Pagina 9 · klik om te vergroten
Pagina 9

Projector Features

The MP7720 Projector integrates high performance optical engine design and user-friendly electrical design, which means more reliable quality and better experience in projecting with the unit.

The MP7720 Projector offers the following features:

  • Intelligent Auto-adjustment to display the best picture quality
  • Easy Digital keystone correction as hot keys to make tilted picture normal easily
  • Powerful AV function to show high AV capability
  • Small and portable unit
  • Full-function remote control
  • Easy to set up and use
  • On screen menus in 7 languages: English, French, German, Italian, Spanish, Portuguese, and Traditional Chinese.
  • Color balance control for data/video
  • Ultra-high brightness projection lamp
  • Ability to display 16.7 million colors

Page 10 of the 3M MP7720 user manual — Remote Control Features
Pagina 10 · klik om te vergroten
Pagina 10

Remote Control Description

3M MP7720 — Remote Control Description diagram (page 10)
Afb. 7 · Remote Control Description

Remote Control Features

The remote control sensors are located in the front/ back of the projector. The distance between the sensor and the remote control unit must be shorter than 6 meters.

Show 11 more labels / short text on this page
Power Source Auto · Zoom In · Zoom Out · Exit · Keystone · Freeze · Menu · Return · Blank · Volume Mute ·
Page 11 of the 3M MP7720 user manual — ZOOM IN/OUT
Pagina 11 · klik om te vergroten
Pagina 11

FREEZE

The image will be frozen when the FREEZE button is pressed. A “Pause” icon appears at the lower right of the screen for three seconds during the freeze function. A “Play” icon appears at the lower right of the screen for three seconds when the freeze function is released. To release the freeze function, press the FREEZE button, RETURN button or SOURCE button (when the input source is switched over during display).

3M MP7720 — FREEZE diagram (page 11)
Afb. 8

ZOOM IN/OUT

By pressing ZOOM IN +, the center of the picture can be magnified. When the button is pressed again, the picture is further magnified, up to four times the original size. By pressing ZOOM OUT -, the size of the image is reduced. When the button is pressed again, the picture is further reduced until it is restored to the original size. To return to the normal display mode, press the RETURN button. (This function can be used in combination with the FREEZE function.)

3M MP7720 — ZOOM IN/OUT diagram (page 11)
Afb. 9

Page 12 of the 3M MP7720 user manual — Installing or Replacing Batteries
Pagina 12 · klik om te vergroten
Pagina 12

Installing or Replacing Batteries

  • Push and slide the battery compartment lid in the direction shown.
  • Install one CR2025 battery as indicated by the diagram inside the compartment.
  • Position the lid over the compartment and snap it back into place.
3M MP7720 — Installing or Replacing Batteries diagram (page 12)
Afb. 10 · Installing or Replacing Batteries

Page 13 of the 3M MP7720 user manual — Installing or Replacing Batteries
Pagina 13 · klik om te vergroten
Pagina 13
Page 13 of the 3M MP7720 user manual — Installing or Replacing Batteries
Page 14 of the 3M MP7720 user manual — Start Up
Pagina 14 · klik om te vergroten
Pagina 14

Start Up

1. Plug the power cord into a wall socket.
2. Press the POWER button for 1 second.
3M MP7720 — Start Up diagram (page 14)
Afb. 11 · Start Up
3M MP7720 — Start Up diagram (page 14)
Afb. 12 · Start Up
  • The back-lit POWER key blinks green and then stays green when power is turned on. (When power is turned off, there is a 60-second reset period before the POWER button will function again.)
3. Turn on all connected equipment.

Page 15 of the 3M MP7720 user manual — Auto Adjustment
Pagina 15 · klik om te vergroten
Pagina 15

Digital Keystone Correction

System Setup

Keystoning is when the projected image is noticeably wider on either the top or bottom. To correct this, press KEYSTONE +/- (hot key) on the control panel of the projector or on the remote control, then adjust the sliding bar labeled Keystone, as needed. Pressing the + button will correct keystoning at the top of the image. Pressing the - button will correct keystoning at the bottom of the image.

3M MP7720 — System Setup diagram (page 15)
Afb. 13 · System Setup

Auto Adjustment

In some cases, you may have to optimize the picture quality manually. To do this, press the AUTO key on the control panel of the projector or on the remote control. Within 3 seconds, the built-in Intelligent Auto Adjustment function of the 3M MP7720 will show you the best picture quality.

3M MP7720 — Auto Adjustment diagram (page 15)
Afb. 14 · Auto Adjustment
Show 4 more labels / short text on this page
Projector · Remote Control · Projector Remote Control ·
Page 16 of the 3M MP7720 user manual — Menu System
Pagina 16 · klik om te vergroten
Pagina 16

Source Selection

Whenever several input sources are available, press the SOURCE key on the control panel of the projector or the remote control for selection.

3M MP7720 — Source Selection diagram (page 16)
Afb. 15 · Source Selection

Menu System

Press the Menu key and the main menu will display on the screen. Press Menu again to display the page items, and press to select the sub-menus. The main menu will disappear automatically if you do not undertake any further action for 10 seconds. Press the Exit button to leave the current sub-menu, and press Exit again to leave the main menu.

3M MP7720 — Menu System diagram (page 16)
Afb. 16 · Menu System

Menu Layout Display Image Control Source

PC input without AV Input

Show 42 more labels / short text on this page
Remote Control · Projector · Source · Auto source · Blank Mute · Menu Bar · Keystone · Auto resize · Language · Source · Brightness · Phase · Mirror · Volume · Contrast · Frequency · Auto off · Tremble · Color Balance · H-position · Reset · Bass · V-position · Mute · Video Input Keystone · Image Ratio · Language · Source · Brightness · System · Mirror · Volume · Contrast · Color · Auto off · Tremble · Sharpness · Tint · Reset · Bass · Mute ·
Page 17 of the 3M MP7720 user manual — 1. Display Menu
Pagina 17 · klik om te vergroten
Pagina 17

1. Display Menu

3M MP7720 — 1. Display Menu diagram (page 17)
Afb. 17 · 1. Display Menu
3M MP7720 — 1. Display Menu diagram (page 17)
Afb. 18 · 1. Display Menu
3M MP7720 — 1. Display Menu diagram (page 17)
Afb. 19 · 1. Display Menu

Keystone · Brightness ·

Page 18 of the 3M MP7720 user manual — 2. Image Menu
Pagina 18 · klik om te vergroten
Pagina 18
3M MP7720 — 2. Image Menu diagram (page 18)
Afb. 20 · 2. Image Menu
3M MP7720 — 2. Image Menu diagram (page 18)
Afb. 21 · 2. Image Menu

2. Image Menu

3M MP7720 — 2. Image Menu diagram (page 18)
Afb. 22 · 2. Image Menu

Will automatically adjust the image to fit on the screen.

3M MP7720 — 2. Image Menu diagram (page 18)
Afb. 23 · 2. Image Menu
Show 4 more labels / short text on this page
Contrast · Color Balance · Auto resize ·
Page 19 of the 3M MP7720 user manual — 2. Image Menu
Pagina 19 · klik om te vergroten
Pagina 19

Phase (Auto Resize OFF)

3M MP7720 — 2. Image Menu diagram (page 19)
Afb. 24 · 2. Image Menu

Frequency (Auto Resize OFF)

3M MP7720 — 2. Image Menu diagram (page 19)
Afb. 25 · 2. Image Menu
3M MP7720 — 2. Image Menu diagram (page 19)
Afb. 26 · 2. Image Menu
3M MP7720 — 2. Image Menu diagram (page 19)
Afb. 27 · 2. Image Menu

H-position · V-position ·

Page 20 of the 3M MP7720 user manual — 3. Image Sub-menu with AV Input
Pagina 20 · klik om te vergroten
Pagina 20

3. Image Sub-menu with AV Input

3M MP7720 — 3. Image Sub-menu with AV Input diagram (page 20)
Afb. 28 · 3. Image Sub-menu with AV Input

This menu is only available when the input signal is from Video and S-Video.

4:9 (Normal) 16:9 (Video)

Auto PAL-M PAL-N SECAM

Show 7 more labels / short text on this page
Image Ratio · System · Color · Less More · Tint · Red Green ·
Page 21 of the 3M MP7720 user manual — 4. Control Menu
Pagina 21 · klik om te vergroten
Pagina 21

4. Control Menu

3M MP7720 — 4. Control Menu diagram (page 21)
Afb. 29 · 4. Control Menu

English (En) French (Fr) German (De) Italian (It) Spanish (Es) Portuguese (Po) Traditional Chinese (TC)

Normal V-Inv (Vertically Inverted) H-Inv (Horizontally Inverted) H/V-Inv (Horizontally and Vertically Inverted) will invert image to display properly according to position of projector.

Language · Mirror ·

Page 22 of the 3M MP7720 user manual — 4. Control Menu
Pagina 22 · klik om te vergroten
Pagina 22
1. Default 3. Rear-screen projection 2. Ceiling-mounted projection 4. Ceiling-mounted and Rear screen projection
3M MP7720 — 4. Control Menu diagram (page 22)
Afb. 30 · 4. Control Menu

Will turn off the power after 60 minutes.

3M MP7720 — 4. Control Menu diagram (page 22)
Afb. 31 · 4. Control Menu

Will restore the projector to its factory default settings.

Auto off · Reset ·

Page 23 of the 3M MP7720 user manual — Off On
Pagina 23 · klik om te vergroten
Pagina 23

5. Source Menu

3M MP7720 — 5. Source Menu diagram (page 23)
Afb. 32 · 5. Source Menu
3M MP7720 — 5. Source Menu diagram (page 23)
Afb. 33 · 5. Source Menu
3M MP7720 — 5. Source Menu diagram (page 23)
Afb. 34 · 5. Source Menu
3M MP7720 — 5. Source Menu diagram (page 23)
Afb. 35 · 5. Source Menu

PC

3M MP7720 — PC diagram (page 23)
Afb. 36
3M MP7720 — PC diagram (page 23)
Afb. 37
3M MP7720 — PC diagram (page 23)
Afb. 38

Off On

3M MP7720 — Off On diagram (page 23)
Afb. 39 · Off On
Show 6 more labels / short text on this page
Source · S-Video · Video · Volume Treble · Bass Mute ·
Page 24 of the 3M MP7720 user manual — Shutdown
Pagina 24 · klik om te vergroten
Pagina 24

Shutdown

1. Press the POWER button and the lamp will shut down.
2. The fan will continue to run for approximately 60 seconds.
3M MP7720 — Shutdown diagram (page 24)
Afb. 40 · Shutdown
3. Disconnect the power cord from the wall socket.
3M MP7720 — Shutdown diagram (page 24)
Afb. 41 · Shutdown

Projector Remote Control ·

Page 25 of the 3M MP7720 user manual — Status LED Indicators
Pagina 25 · klik om te vergroten
Pagina 25

Lamp Information

Use and Replacement of Lamp

The projector lamp has a normal operating time of approximately 1200 to 1500 hours, called the lamp life. During the normal lamp life, the picture will be bright and the colors clear. If the lamp is used beyond the normal lamp life, the picture will become dark and the colors poor. Always replace lamps with new ones. Using an old lamp in the projector could cause a malfunction. When the power is turned on, the LAMP indicator will light up red or a message will be displayed to indicate when it is time to replace the lamp. Consult your dealer.

Status LED Indicators

Lamp Exceed Service Hours — When this LED lights red continuously, it is warning you that the lamp has exceeded 1500 service hours. Replace the projection lamp immediately.

CHANGE THE LAMP, AND RESET THE LAMP TIMER — The lamp has been in operation for 1200 hours.

CHANGE THE LAMP, THE POWER WILL TURN OFF AFTER 20 HOURS — The lamp has been in operation for 1479 hours, and the power will turn off after 20 more hours.

CHANGE THE LAMP! — The lamp has been in operation for over 1500 hours, and the power will turn off automatically in 10 minutes.

All of these messages will not display for more than 3 minutes, but each message will be displayed whenever you turn on the lamp again.

Lamp is not well attached — When the LED blinks rapidly, it indicates that the lamp is not attached properly.

Temperature is too high — When the projector’s internal temperature is too hot to operate safely, the LED blinks slowly for one minute and the lamp turns off automatically.

If the LED light is off, it means that the projector’s lamp and temperature are operating under normal conditions.

Page 26 of the 3M MP7720 user manual — Lamp Replacement
Pagina 26 · klik om te vergroten
Pagina 26

Lamp Replacement

3M MP7720 — Lamp Replacement diagram (page 26)
Afb. 42 · Lamp Replacement
3M MP7720 — Lamp Replacement diagram (page 26)
Afb. 43 · Lamp Replacement
3M MP7720 — Lamp Replacement diagram (page 26)
Afb. 44 · Lamp Replacement
1. Press the POWER button to turn the main power switch off and disconnect the power cord from the outlet.
2. Loosen the screw and remove the lamp cover. If the lamp is hot, avoid burns by waiting 45 minutes until the lamp has cooled.
3. Loosen the 3 screws indicated by the arrows below. (It is strongly recommended to use a magnetic-headed screwdriver, if possible. Pull the handle to remove the lamp housing. If the screws are not loosened completely, they could damage your fingers. Do not insert your hand into the box after the lamp is removed. If you touch the optical parts inside, it could cause color unevenness, etc.
4. Replace the lamp with the new one, insert it in the projector, and tighten the screws. Firmly tighten the lamp screws. Loose screws may cause a bad connection, which may result in a malfunction.
5. Re-install the lamp cover and tighten the screw. Do not turn on the power with the lamp cover removed. Whenever the lamp has been replaced, reset the total operation time of the lamp. Do not reset if the lamp was not replaced, as this could cause breakage.

Page 27 of the 3M MP7720 user manual — OSD FUNCTION
Pagina 27 · klik om te vergroten
Pagina 27

Optional Video Module

To reduce the risk of cuts to fingers and damage to internal components, use cau- tion when removing lamp glass that has shattered into sharp pieces.

To reduce the risk of cuts to fingers and/or decreasing image quality by touching the lens, do not touch the empty lamp compartment when the lamp has been removed.

This lamp contains mercury. Consult your local hazardous waste regulations and dispose of this lamp in a proper manner.

Resetting Lamp Hours

If you replace the lamp after 1500 hours of operation, please proceed as follows within 10 minutes of powering on.

OSD FUNCTION

Press the Exit button on the projector or the remote control for 3 seconds to display the total used lamp time.

3M MP7720 — OSD FUNCTION diagram (page 27)
Afb. 45

Press the MENU button on the projector or the remote control during the lamp hour message. An adjustment message will appear.

3M MP7720 — OSD FUNCTION diagram (page 27)
Afb. 46
  • Press or to select the setting. To select the default setting, select “Reset” (or “Cancel” to return to the default setting).
  • Press EXIT to leave.
Page 28 of the 3M MP7720 user manual — Description of Part Number (Not Included in Standard Packet)
Pagina 28 · klik om te vergroten
Pagina 28

Service information

Accessories (Included in standard packet)

Power Cord (EU) 78-8118-8840-9

Power Cord (US) 78-8118-8838-3

Power Cord (UK) 78-8118-8841-7

Signal Cable 78-8118-8710-4

RCA Cable DY-0205-1008-6

S-Video cable 78-8118-3238-1

PC - PC Audio Cable 78-8118-8290-7

Audio - PC Audio Cable DY-0205-1359-3

Remote Control 78-8118-8842-5

3-2 converter 78-8118-8704-7

Description of Part Number (Not Included in Standard Packet)

Description of parts Part number

Deluxe carry case (hold projector and notebook) 78-6969-9203-7

120W Lamp module 78-6969-9264-6

Description Part Number ·

Page 29 of the 3M MP7720 user manual — REMOTE CONTROL DOESN’T WORK
Pagina 29 · klik om te vergroten
Pagina 29

Common Problems & Solutions

PROBLEMS TRY THESE SOLUTIONS

NO POWER • Plug the power cord into the AC Inlet.

  • Plug the power cord into the power Inlet.
  • Wait two minutes after the projector has been turned off before turning the projector back on.

NO PICTURE • Check that you have selected the proper input source.

  • Ensure all cables are connected properly.
  • Adjust the brightness and contrast.
  • Remove the lens cap.

IMAGE ISN’T SQUARE ON THE SCREEN

  • Reposition the unit to improve its angle on the screen.
  • Use the keystone correction function key on the control panel of the projector or the remote control unit.

POOR COLOR • Select the correct video system.

  • Adjust brightness, contrast, or saturation.

IMAGE IS BLURRED • Press the Auto key on the control panel of the projector or the remote control unit to get better picture quality.

  • Adjust the focus .
  • Reposition the unit to improve its screen angle.
  • Ensure the distance between the unit and screen is within the adjustment range of the lens.

REMOTE CONTROL DOESN’T WORK

  • Replace the battery with a new one.
  • Make sure there is no obstacle between the remote control and the unit.
  • Stand within 4 meters (13 feet) of the unit.
  • Make sure nothing is blocking the receiver on the control pad.

Page 30 of the 3M MP7720 user manual — CHANGE THE LAMP, AND RESET THE LAMP TIMER
Pagina 30 · klik om te vergroten
Pagina 30

Status Messages

On Screen Messages Meaning

SEARCHING Projector is searching for input.

INPUT SIGNAL DETECTED, ACTIVATING AUTO IMAGE

Projector has identified the input signal and is processing the auto image adjustment.

SYNC IS OUT OF RANGE Input signal’s frequency exceeds that of projector’s

CHANGE THE LAMP, AND RESET THE LAMP TIMER

The lamp has been in operation for 1200 hours. Lamp replacement is recommended.

CHANGE THE LAMP, THE POWER WILL TURN OFF AFTER 20 HOURS

The lamp has been in operation for 1479 hours, and the power will turn off after 20 more hours. Replace the lamp as soon as possible.

CHANGE THE LAMP! The lamp has been in operation for over 1500 hours, and the power will turn off automatically in 10 minutes. Replace the lamp immediately.

Page 31 of the 3M MP7720 user manual — Projector specifications
Pagina 31 · klik om te vergroten
Pagina 31

Projector specifications

Product namePersonal Projector

Display system 1-CHIP DMD

Lens F/NumberF/2.6 Focal Length: F = 36 mm

Lamp 120W VIP lamp

Power supply AC90 ~ 240V, 6.5A ~ 2.9A, 50/60 Hz (Automatic)

Power consumption 200 W (Max)

Dimensions 186 mm (W) x 220 mm (H) x 52 mm (D)

Computer InputRGB input: D-sub 15-pin (Female)
Video Signal Input S VIDEOMini DIN 4-pin terminal
VIDEORCA Jack terminal

Audio Signal Input Mini Jack Mono Audio Terminal

1 Watt speaker x 1

Show 11 more labels / short text on this page
Technical Specifications · General · Model name MP7720 · Optical · Electrical · Mechanical · Operating temperature range · Weight 3 lbs · Input terminal · Output ·
Page 32 of the 3M MP7720 user manual — Timing chart
Pagina 32 · klik om te vergroten
Pagina 32

Timing chart

Resolution H Sync (kHz) V Sync (kHz) Remark

640x350 31.5 70.1

640x400 37.9 85.1 VESA

720x400 31.5 70.0

720x400 37.9 85.1 VESA

640x480 31.5 60.0 VESA

640x480 37.9 72.8 VESA

640x480 35 66.7 Macintosh

640x480 43.3 85.0 VESA

800x600 35.2 56.3 VESA

800x600 37.9 60.3 VESA

800x600 46.9 75.0 VESA

800x600 48.1 72.2 VESA

800x600 53.7 85.1 VESA

832x624 49.7 74.5 Macintosh

1024x768 48.4 60.0 VESA

1024x768 56.5 70.1 VESA

1024x768 60.0 75.0 VESA

1024x768 68.7 85.0 VESA

1280x1024 64.0 60.0 VESA

Page 33 of the 3M MP7720 user manual — Troubleshooting
Pagina 33 · klik om te vergroten
Pagina 33

Troubleshooting

3M MP7720 — Troubleshooting diagram (page 33)
Afb. 47 · Troubleshooting

· ™

Page 34 of the 3M MP7720 user manual —
Pagina 34 · klik om te vergroten
Pagina 34

Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly set forth in a written agreement signed by an authorized officer of 3M.

Warranty and Limited Remedy. This product will be free from defects in material and manufacture for a period of two years from the date of purchase. Exclusion to Warranty: The lamps are considered a consumable item and are warrantied for 90 days or 180 hours, whichever occurs first. 3M MAKES NO OTHER WARRANTIES, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product.

Limitation of Liability. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted.

Let us help you make the most of your next presentation. We offer everything from presentation supplies to tips for better meetings. And we’re the only transparency manufacturer that offers a recycling program for your used transparencies. For late-breaking news, handy reference and free product samples, call us toll-free in the continental United States and Canada, 24 hours a day, or visit our Internet Website.

3M MP7720 —   diagram (page 34)
Afb. 48

3M Austin Center Building A145-5N-01 6801 River Place Blvd. Austin, TX 78726-9000

3M Canada P.O. Box 5757 London, Ontario N6A 4T1

3M Mexico, S.A. de C.V. Apartado Postal 14-139 Mexico, D.F. 07000 Mexico

3M Europe Boulevard de l’Oise 95006 Cerge Pontoise Cedex France

Litho in USA Copyright © 2001 3M IPC.

All Rights Reserved 78-6970-9066-6 Rev. B

Probleemoplossing

Probleemoplossing

Veelvoorkomende problemen, mogelijke oorzaken en oplossingen.

ProbleemMogelijke oorzaakOplossing
NO POWER• Plug the power cord into the AC Inlet. • Plug the power cord into the power Inlet. • Wait two minutes after the projector has been turned off before turning the projector back on. p.29
NO PICTURE• Check that you have selected the proper input source. • Ensure all cables are connected properly. • Adjust the brightness and contrast. • Remove the lens cap. p.29
IMAGE ISN’T SQUARE ON THE SCREEN• Reposition the unit to improve its angle on the screen. • Use the keystone correction function key on the control panel of the projector or the remote control unit. p.29
POOR COLOR• Select the correct video system. • Adjust brightness, contrast, or saturation. p.29
IMAGE IS BLURRED• Press the Auto key on the control panel of the projector or the remote control unit to get better picture quality. • Adjust the focus. • Reposition the unit to improve its screen angle. • Ensure the distance between the unit and screen is within the adjustment range of the lens. p.29
REMOTE CONTROL DOESN’T WORK• Replace the battery with a new one. • Make sure there is no obstacle between the remote control and the unit. • Stand within 4 meters (13 feet) of the unit. • Make sure nothing is blocking the receiver on the control pad. p.29

Vraag stellen over de 3M MP7720

Eigenaren en ons team reageren doorgaans binnen een dag — en uw vraag helpt ook de volgende persoon.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
Nog geen vragen over de 3M MP7720

Stel als eerste een vraag — andere eigenaren of ons team geven antwoord.

Origineel document

3M MP7720 handleiding-pdf

34 pagina's·1.5 MB·Projector·PDF
Klik op een bovenstaande pagina om deze hier te openen
Pagina 1 / …
100%
Pagina's laden…