Gebruiksaanwijzing /service van het product IOD22030 van de fabrikant Ice-O-Matic
Ga naar pagina of 22
Part Nu mber 908 1286-01 Print Date 7/01P PRODUCT MA NUAL FOR MO DEL IOD16022 AND IOD22030 COUNTER TOP DISPENSER.
IOD16022 Introduction IOD22030 Page 1 To the owner or user: This product manual is a source of information about the installation, start up, cleaning, maint enance and repair o f the product.
IOD16022 Specificatio ns IOD22030 Page 2 Limitations: Must meet the same limitations as the cuber installed on top o f it: 50 ° F. air minimum 100 ° F. air maximum Must be installed indoors. Must allow at least 6 inch clearance a t the rear and both sides w hen using an air cooled ice machine.
IOD16022 Specificatio ns IOD22030 Page 3 Ice-O-Mati c ice mach ines are not designed for outdoor ins tallati ons. Machine requires voltage indicated on rating nameplate.
IOD16022 Installat ion : Gen eral IOD22030 Page 4 Equipment Description The IOD16022 and IOD22030 are counter top mounted ice only dispensers. These units are designed to dispense cube ice only and hav e ice storage capacities of 160 lb . and 220 lb. respectively.
IOD16022 Installat ion: Gen eral IOD22030 Page 5 Drain Line Installation (Dispenser) Connect a ¾” ID flexible drain hose to the drain nipple located under the ice storage bin. Clamp the hose in place and insulate the hose to prevent condensation. Connect a ¾” ID flexible drain hose to the drain tube at the back o f the drain pan.
IOD16022 Installat ion: Gen eral IOD22030 Page 6 Final Preparation Install the drain pan on the dispenser by en gaging the slots in the metal backplate o f the drain pan onto the brackets protruding from the lower left and right hand corners o f the dispenser front.
IOD16022 Installat ion: Gen eral IOD22030 Page 7 Ice Machine I nstallation Make sure the counter the dispenser is place on is structurally able to hold the co mbined weight of the dispenser, ice and ice machine. Remove the dispenser cover. (Retain for future use) Place the appropriate stainless steel KBT adapter onto the top o f the dispenser.
IOD16022 Cleanin g and Sanitizin g IOD22030 Page 8 The dispenser must be cleaned and sanitized periodically as prescribed by local health authority or the product supplier, which ever has jurisdiction. Ice-O-Matic reco mmends the dispenser be cleaned and sanitized at least monthly if not specified by local code re quirement.
IOD16022 Cleanin g and Sanitizin g IOD22030 Page 9 Monthly And Initial St art-Up: Sanitize the ice storage system Disconnect power to the dispenser and ice m achine.
IOD16022 Service Diagnosis/Electrical Sequence I OD22030 Page 10 Service Diagnosis PROBLEM PROBABLE CAUSE CORRECTION W ill not dispense No ice in hopper Fill bin with ice ice Vend switch does not clos.
IOD16022 IOD16022 and IOD2230 Service Parts IOD22030 Page 11 This parts list contains the service parts available for the IOD16022 and IOS22030 ice only dispenser. Check the model number on the da t a plate and refer to the cor rect column listing for the specific dispenser.
IOD16022 IOD16022 and IOD2230 Service Parts IOD22030 Page 12 Cabinet.
IOD16022 IOD16022 and IOD2230 Service Parts IOD22030 Page 13 Cabinet IOD16022 IO D22030 Item N umb er Part N umb er Part N umb er Descrip tion 1 30064502 30064512 Black Lid 2 30074312 30074312 Side Pa.
IOD16022 IOD16022 and IOD2230 Service Parts IOD22030 Page 14 Cabinet Front.
IOD16022 IOD16022 and IOD2230 Service Parts IOD22030 Page 15 Cabinet Front IOD16022 IO D22030 Item N umb er Part N umb er Part N umb er Descrip tion 1 30064206 30064226 Cover, Merch. Black-Lever 30064218 30064238 Cover, Merch. Black-Push Button 30069901 30069901 Screws For Cover 2 3015075218 3015075418 Merch.
IOD16022 IOD16022 and IOD2230 Service Parts IOD22030 Page 16 Control Box.
IOD16022 IOD16022 and IOD2230 Service Parts IOD22030 Page 17 Control Box IOD16022 IO D22030 Item N umb er Part N umb er Part N umb er Descrip tion 1 3000480001 3000480001 Relay 2 1193210500 1193210500.
IOD16022 IOD16022 and IOD2230 Service Parts IOD22030 Page 18 Ice Door and Solenoid A ssembl y.
IOD16022 IOD16022 and IOD2230 Service Parts IOD22030 Page 19 Ice Door A nd Solenoid Assembly IOD16022 IO D22030 Item N umb er Part N umb er Part N umb er Descrip tion 1 3A34801001 3A34801001 Ice Door 2 1061400000 1061400000 Cotter Pin (6 Req.
IOD16022 IOD16022 and IOD2230 W iring Diagrams IOD22030 Page 20.
IOD16022 IOD16022 and IOD2230 W iring Diagrams IOD22030 Page 21.
Een belangrijk punt na aankoop van elk apparaat Ice-O-Matic IOD22030 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Ice-O-Matic IOD22030 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Ice-O-Matic IOD22030 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Ice-O-Matic IOD22030 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Ice-O-Matic IOD22030 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Ice-O-Matic IOD22030 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Ice-O-Matic IOD22030 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Ice-O-Matic IOD22030 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
