Gebruiksaanwijzing /service van het product S0850M van de fabrikant Manitowoc Ice
Ga naar pagina of 38
Thank you for selecting a Mani towoc Ice Machine, the dependa bility leader in ice making equipment and rela ted products. With proper in stallation, care and maintenance, your new Man itowoc Ice Machine will provide you with many years of reliable and economical pe rformance.
Safety Notices As you work on an S Model Ser ies Ice Machine, be sure to pay close attention to t he safety notic es in this manual. Disregarding the notice s may lead to serious injury and/or damage to the ice mach ine.
Table of Contents (continue d) Part No. 80-1560-3 1 Section 1 General Information Model Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 How to Read a Model Number . . . . . . . . . . . . . .
Table of Contents (continued) 2 Part No. 80-1560-3 Section 3 Ice Machine Operation Component Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 Sequence Of Operation . . . . . . . . . . . . . . . . . .
Section 1 General Information Part Number 80-1560-3 1-1 Section 1 General Information Model Numbers This manual co vers the following models: NOTE: Model numbers ending in 3 indicate a 3-phase unit.
General Information Section 1 1-2 Part Number 80-1560-3 Accessories Contact your Manito woc distribut or for these optional accessories: BIN CASTER Replaces sta ndard legs. ICE BAGGER Maximize profits fro m bagged ice sales with this convenient accessory .
Section 1 General Information Part Number 80-1560-3 1-3 Model/Serial Number Location These numbers are requir ed when requesting information from your local Manitowoc distributor , or Manitowoc Ice, Inc. The model and seria l number are listed on the MODEL/ SERIAL NUMBER DEC AL affixed to the ice machine, remote cond enser and stor age bin.
General Information Section 1 1-4 Part Number 80-1560-3 Owner W arranty Registration Card GENERAL The packet cont aining this manual also includes warranty information.
Section 2 Installation Instructions Part Number 80-1560-3 2-1 Section 2 Inst allation Instructions General These instructions are provided to assist the qu alified installer . Check your local Y ellow Pages for the name of the nearest Manitowoc distributor , or call Manitowoc Ice, Inc.
Installation Instru ctions Section 2 2-2 Part Number 80-1560-3 Location of Ice Machine The location selected for the ice machine must m eet the following criteria. If any of these criteria ar e not met, select another location. • The location must be free of airbo rne and other contamin ants.
Section 2 Installation Instructions Part Number 80-1560-3 2-3 Electrical Service GENERAL VO L T A G E The maximum allowable voltage variation is ±10% of the rated volt age at ice machine start-up (when the ele ctrical load is highest). FUSE/CIRCUIT BREAKER A separa te fuse/circuit br eaker must be provided for each ice machine.
Installation Instru ctions Section 2 2-4 Part Number 80-1560-3 Self-Cont ained Electri cal Wiring Connections SELF CONT AINED ICE MACHINE 1 15/1/60 OR 208-230/1/6 0 SELF CONT A INED ICE MACHINE 208-230/3/60 SELF CONT A INED ICE MACHINE 230/1/50 ! Warning These diagrams are not in tended to show prope r wire routing, wire sizin g, disconnects, etc.
Section 2 Installation Instructions Part Number 80-1560-3 2-5 W ater Supply and Drain Requirement s W ATER SUPPLY Local water conditions may require tr eatment of th e water to inh ibit scale for mation, filter se diment, an d remove chlor ine odor and taste.
Installation Instru ctions Section 2 2-6 Part Number 80-1560-3 W ATER SUPPLY A ND DRAIN LINE SIZING/CONNECTIONS T ypical Wat er Supply Drain Inst allation ! Caution Plumbing must conform to state and local codes.
Section 2 Installation Instructions Part Number 80-1560-3 2-7 Inst allation Check List Is the Ice Machine level? Has all of th e internal packing been remo ved? Have all of the electrical and water co.
Installation Instru ctions Section 2 2-8 Part Number 80-1560-3 Before St arting the Ice Machine All Manitowoc ice machines are factory-operated an d adjusted before shipmen t. No rmally , new installations do not require any adjustment. T o ensure proper op eration, follow t he Operat ional Checks in Section 3 of this manual.
Section 3 Ice Machine Operation Part Number 80-1560-3 3-1 Section 3 Ice Machine Operation Component Identification sv3150 sv3149 Check V alve Ice Thickness Probe Dump V alve T oggle Switch W ater Curt.
Ice Machine Operation Section 3 3-2 Part Number 80-1560-3 Sequence Of Operation NOTE: The toggle switch must be in the ice position and the water curta in must be in place on the evaporator before the ice machine will start. INITIAL ST ART-UP OR START-UP AF TER AUTOMATIC SHUT-OFF 1.
Section 3 Ice Machine Operation Part Number 80-1560-3 3-3 HARVEST SEQUENCE 5. W a ter Purge The harvest valve(s) op ens at the beginning of the water purge to divert hot refrigerant gas into the evaporator . The water pump co ntinues to run, and th e water dump valve energizes for 45 seconds to pur ge the water in the sump trough.
Ice Machine Operation Section 3 3-4 Part Number 80-1560-3 Operational Checks GENERAL Manitowoc ice machines are factory-operated and adjusted before shipmen t.
Section 3 Ice Machine Operation Part Number 80-1560-3 3-5 HARVEST SEQUENCE W ATER PURGE The harvest sequence water purge ad justment may be used when the ice mach ine is hooked up to special water systems, such as a de-ionized water treatment system. • The harvest sequence w ate r purge is factory set for 45 seconds.
Ice Machine Operation Section 3 3-6 Part Number 80-1560-3 THIS P AGE INTENTIONALL Y LEFT BLANK.
Section 4 Maintenance Part Number 80-1560-3 4-1 Section 4 Maintenance General Y ou are responsible for main t aining the ic e mach ine in accordance with the instru ctions in this manual.
Maintenance Section 4 4-2 Part Number 80-1560-3 Guardian ™ Slime is a lead ing cause of ice machine breakdowns and biological growth is a health concer n. The Guardian ™ system releases chlorine dioxide on a controlled basis to inhibit the growth of bacteria and fungi that form slime and cause malodors in the food z one of ice ma chines.
Section 4 Maintenance Part Number 80-1560-3 4-3 Interior Cleani ng and Sanitizing GENERAL Clean and san itize the ice machine every six month s for efficient oper ation. If the ice machine requires more frequent cleaning and saniti zing, consu lt a qualified service company to test the water quality and recommend appropria te water treatment.
Maintenance Section 4 4-4 Part Number 80-1560-3 SANITIZING PROCEDURE Use sanitizer to remove algae or slime. Do not use it to remove lime scale or other mineral de posits. Ste p 1 Set the toggle sw itch to the OFF position af ter ice falls from the evaporator at the end of a Harvest cycle.
Section 4 Maintenance Part Number 80-1560-3 4-5 REMOVAL OF PARTS FOR CLEANING/SANITIZING 1. Turn of f the electrical and water supp ly to the ice machine (and disp ense r when applicable). 2. Remove all ice from the bin. 3. Remove the water curtain and the component s you want to clean or sanitize.
Maintenance Section 4 4-6 Part Number 80-1560-3 1. Water Curt a in A. Gently flex the curt ain in the center a nd remove it from the right side. B. Slide the left pin ou t. W ater Curtain Removal 2. Ice Thickness Probe A. Compress the hinge pi n on the top of the ice thickness probe.
Section 4 Maintenance Part Number 80-1560-3 4-7 3. Water Distribution T ube NOTE: Distribution tube thumbscrews are retained by o- rings to prevent loss. Loosen thumbscre ws but do not pull thumbscre ws out of distributio n tube. W ater Distribution T ube Removal A.
Maintenance Section 4 4-8 Part Number 80-1560-3 W ater Level Probe 1. Remove t he water tr ough. 2. T he water level prob e normally does not re quire removal for cleaning. Th e probe ca n be wiped an d cleaned in place or proceed to step 3. 3. Pull the water level pr obe straight down to disengage .
Section 4 Maintenance Part Number 80-1560-3 4-9 W ater Dump V alve The water dump va lve normally does not re quire removal for cleaning. T o determin e if removal is necessary: 1.
Maintenance Section 4 4-10 Part Number 80-1560-3 Evaporator T ray Removal 1. Remove t he water tr ough. 2. Remove thumbscrew on left side of tray . 3. Allow left side of tray to drop as you pull the tray to the left side. Continue un til the outlet tube disengages fro m the right side.
Section 4 Maintenance Part Number 80-1560-3 4-11 W ater Inlet V alve The water inlet valve norma lly does not require removal for cleaning. Refer to Sectio n 5 for a list of causes for “No W ater Entering W ater T rough” or “W ater Overflows W ater Tr ough.
Maintenance Section 4 4-12 Part Number 80-1560-3 Removal from Service/Winterization GENERAL S pecial precautions must be ta ken if the ice machine is to be removed from service for an extended period of time or exp osed to am bient temp eratures of 32°F (0°C ) or below .
Section 5 Before Calling For Service Part Number 80-1560-3 5-1 Section 5 Before Calling For Service Checklist If a problem arises during operation of your ice machine, follow the checklis t below before calling service. Routine adjustment s and maintenance proced ures are not co vered by the warranty .
Before Calling For Service Section 5 5-2 Part Number 80-1560-3 Safety Limit Feature In addition to the standard sa fety controls, such as the high pressure cutout, your Manitowoc ice machine features built-in safety lim its which will stop the ice machine if conditions arise which could cause a ma jor component failure.
.
MANITOWOC ICE, INC. 21 1 0 South 26th S treet P .O. Box 1720 Manitowoc, WI 54221-1720 Phone: (920) 682-0161 Service Fax: (920) 683-7585 Web Site - www .
Een belangrijk punt na aankoop van elk apparaat Manitowoc Ice S0850M (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Manitowoc Ice S0850M heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Manitowoc Ice S0850M vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Manitowoc Ice S0850M leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Manitowoc Ice S0850M krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Manitowoc Ice S0850M bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Manitowoc Ice S0850M kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Manitowoc Ice S0850M . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
