Gebruiksaanwijzing /service van het product MX3710 van de fabrikant Memorex
Ga naar pagina of 21
HOME AUDIO SYSTEM WITH CD PLA YER, CASSETTE RECORDER AND AM/FM STEREO RADIO MODEL: MX3710 BEFORE OPERA TING THIS PRODUCT , PLEASE READ THESE INSTRUCTIONS COMPLETEL Y .
1 DANGER: Invisible and hazardous laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. W ARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
2 SAFETY INSTRUCTIONS INFORMATION: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
3 PREP ARA TION FOR USE (CONTINUED) SPEAKER CONNECTION 1. Place the speakers in convenient locations on either side of the unit. Usually a distance of fi ve to eight feet between speakers provides the best stereo effect, but this may vary depending on the size and acoustics of the room.
4 LOCA TION OF CONTROLS AND INDICA T ORS 1 15 13 17 16 18 21 22 23 25 24 14 20 19 2 5 4 3 6 7 8 9 10 11 12 1. CD Compartment 2. Display 3. DISPLAY Button 4. Function (CD/TAPE/TUNER) Buttons 5. STANDBY Indicator 6. POWER Button 7. PLAY/PAUSE ( ❿ ) Button 8.
5 LOCA TION OF CONTROLS AND INDICA T ORS 1 3 4 5 7 15 14 13 12 11 8 9 10 6 2 1. POWER Button 2. REPEA T/PRE (Preset) UP Button 3. FUNCTION Button 4. RANDOM Button 5. TIMER Button 6. PRE-EQ Button 7. VOLUME Down Button 8. PLA Y/P AUSE ( ❿ ) Button 9.
6 OPERA TING INSTRUCTIONS With the power off, press and hold the MEMORY/TIME SET button; “24H” will blink. 1 Press the MEMORY/TIME SET button and the hours will blink. 3 Press the TUNING/CD SKIP/ SEARCH ( ) ❶ or ( ) ❷ button to set the unit to the 24 hour (24H) mode (also known as military time, or 12 hour (12H) mode.
7 OPERA TING INSTRUCTIONS (CONTINUED) Press the POWER button to turn the unit on; the STANDBY indicator will go out. 1 Press the TUNING/CD SKIP/ SEARCH ❶ or ❷ button to select a station (see Tuning note below). NOTE: If the FM band is selected and you have tuned to an FM Stereo station, the FM Stereo indicator will light in the display.
8 OPERA TING INSTRUCTIONS (CONTINUED) Press the POWER button to turn the unit on; the STANDBY indicator will go out. 1 Press the MEMORY/TIME SET button ❶ . Within four seconds, press the REPEAT/PRE UP button ❷ until the desired memory number appears on the display.
9 Press the POWER button to turn the unit on; the STANDBY indicator will go out. 1 The CD player will read the table of contents on the disc and the total number of tracks and total playing time on the disc will appear in the display. CD 4 Press the CD OPEN/CLOSE button to open the CD compart- ment door.
10 After you insert the disc into the CD player and the total number of tracks appear on the display, you may press either the TUNING/CD SKIP/ SEARCH ( ) ❶ or ( ) ❷ button to select a specific track for playback. 1 2 1 When the desired track number appears in the display, press the PLAY/PAUSE ( ❿ ) button.
11 To repeat a single track, press the REPEAT/PRE UP button ❶ twice; “REPEAT” will blink in the display. Press the TUNING/CD SKIP/ SEARCH ( ) ❷ or ( ) button ❸ to select the specific track that you wish to repeat. When the desired track number appears in the display, press the PLAY/PAUSE ( ❿ ) button ❹ to begin playback.
12 Press the TUNING/CD SKIP/ SEARCH ( ) ❶ or ( ) button ❷ to select the first track that you wish to program. When the desired track number appears in the display, press the MEMORY/ TIME SET button ❸ again. 3 2 1 4 Press either the TUNING/CD SKIP/ Search ( ) ❶ or ( ) button ❷ to select the next track you wish to program.
13 Press the TAPE Function button. 1 Press the PLAY ( ❿ ) button to begin playback. 4 Insert a pre-recorded cassette into the slots in the Cassette Door with the open end facing up. Close the cassette door. 3 Open the Cassette Button compartment and press the STOP/EJECT button to open the cassette compartment.
14 Open the Cassette Button compartment and press the STOP/EJECT button to open the cassette compartment. Insert a good quality blank cassette tape and close the Cassette Door. 1 When you are ready to begin recording, press the RECORD () b utton. The PLAY ( ❿ ) button will also engage.
15 With the power off, press and hold the TIMER/SLEEP button ❶ until “TIMER” blinks in the display. Press and hold the MEMORY/TIME SET button ❷ until timer hour digits blink in the display. 1 2 1 Within a couple seconds, “TIMER” will light in the display to indicate that the timer is set.
SAFEGUARD AGAINST ACCIDENT AL ERASURE When a new recording is made, any program material previously recorded is automatically erased and only the new recording remains. To safeguard valuable recordings from being erased accidentally, the cassette and the deck are equipped with a special device.
Caring for Compact Discs • Treat the compact disc carefully. Handle the compact disc only by its edges. Never allow your fi ngers to come in contact with the shiny, unprinted side of the compact disc. • Do not attach adhesive tape, stickers, etc.
18 Symptom Possible Cause Solution Radio Noise or sound distorted Station not tuned properly for Retune the AM or FM broadcast on radio broadcasts. AM or FM. station. FM: Wire Antenna is not Extend Wire Antenna. extended. AM: Unit is not positioned Rotate unit until best reception is correctly.
19 FOR ADDITIONAL SET -UP OR OPERA TING ASSIST ANCE, PLEASE VISIT OUR WEBSITE A T WWW .MEMCORPINC.COM OR CONT ACT CUSTOMER SERVICE A T 1-800-919-3647. PLEASE KEEP ALL P ACKAGING MA TERIAL FOR A T LEAST 90 DA YS IN CASE YOU NEED TO RETURN THIS PRODUCT T O YOUR PLACE OF PURCHASE OR MEMOREX.
Memcorp, Inc. Weston, FL Printed in Hong Kong Visit our website at www .memcorpinc.com MX3710.O/M.QXD 4/30/02 10:49 AM Page 20.
Een belangrijk punt na aankoop van elk apparaat Memorex MX3710 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Memorex MX3710 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Memorex MX3710 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Memorex MX3710 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Memorex MX3710 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Memorex MX3710 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Memorex MX3710 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Memorex MX3710 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
