Gebruiksaanwijzing /service van het product 887 van de fabrikant ParaBody
Ga naar pagina of 16
1 887 LA T OPTION CLASS H PAR T # 7305601 REV . A Revision: 06/20/02 USER’S GUIDE W ARNING: Read and follow all directions for each step to insure proper assembly of this product.
THERE IS A RISK ASSU MED BY IND IVIDUALS W HO USE T HI S TYPE OF EQUIPMENT. TO MINIMIZE RISK F OLLOW THESE RULE S ! 1. Before u sing, read al l the w arnings and in structions on the use of this mach ine. Use only for in tended exercise. DO NOT mo dify the m achine.
IMPOR T ANT NOTES Please note: T ools Required for Assembly * Thank you for purchasing the ParaBody 877 Lat Option. Please read these instructions thoroughly and keep them for future reference. This product must be assembled on a flat, level surface to assure its proper function.
4 P AR TS LIST PA R T # LEA6800209 LEA6800610 LEA6800809 LEA6801009 LEA6801110 LEA6759810 LEA6274410 LEA6725310 LEA3116201 LEA3116101 LEA6802101 LEA6671601 LEA6692601 LEA3103102 LEA6140701 LEA6405201 .
5 FIGURE 2 STEP 2: 0 1 2 34 5 6 1/2 1/2 1/2 1/2 1/2 1/2 • LOOSEL Y assemble the PULLEY HOUSING (3) and the UPRIGHT (1) to the LOWER CROSS SUPPOR T using two 3/8 X 4” BOL TS (38), four 3/8” W ASHERS (30), and two 3/8” LOW HEIGHT LOCK NUTS (29).
6 STEP 3: FIGURE 3 • Insert two 2-1/2” ROUND END CAPS (19) into the ends of the ADJ. FOOT SUPPOR T (2) as shown in FIGURE 3. • Insert one 1-3/4” END CAP (20) into the end of the ADJ.
7 STEP 4: FIGURE 4 0 1 2 34 5 6 1/2 1/2 1/2 1/2 1/2 1/2 • Attach eight 1 X 1” GLIDES (15) to the ends the CARRIAGE (6) as shown in FIGURE 4 using the following steps: • Thoroughly clean all surfaces where the 1 X 1” GLIDES (15) are to be attached.
8 STEP 6: FIGURE 6 • LOOSEL Y assemble the TOP BOOM (4) to the UPPER CROSS SUPPOR T using two 3/8 X 4” BOL TS (38), four 3/8” W ASHERS (30) and two 3/8” LOCK NUTS (31).
9 0 1 2 34 5 6 1/2 1/2 1/2 1/2 1/2 1/2 STEP 8: FIGURE 8 • Route the 115-1/4” CABLE (11) through the TOP BOOM (4) as shown in FIGURE 8. • SECUREL Y assemble three 3-1/2” PULLEYS (9) into the sl.
STEP 9: FIGURE 9 10 31 • Place one 3-1/2” PULLEY (9) into the loop of the CABLE (12) below the second and third PULLEY of the TOP BOOM (4) as shown in FIGURE 9.
11 STEP 10: FIGURE 10 • Route the threaded end of the 121-3/4” CABLE (12) through the slot of the PULLEY HOUSING then SECUREL Y assemble one 4-1/2” PULLEY (10) to the PULLEY HOUSING (3) using two 3/8 X 2-3/4” BOL TS (32), two 3/8” FLANGE SP ACERS (33), two 3/8” W ASHERS (30), and two 3/8” LOCK NUTS (31).
12 STEP 1 1: FIGURE 1 1 • Loop the 121-3/4” CABLE (12) around one 3-1/2” PULLEY (9) as shown in FIGURE 11. • LOOSEL Y assemble the 3-1/2” PULLEY (9) to the 3/16 X 1-3/4 X 5-1/4” PLA TES (23) using one 3/8 X 2” BOL T (35), two 3/8” W ASHERS (30), and one 3/8” LOCK NUT (31).
13 STEP 12: FIGURE 12 Thank you for pur chasing the Parabody 887 LA T OPTION. If unsure of proper use of equipment, call your local Parabody distributor or call the Parabody customer service department at (800) 328-9714. • Attach the LA T BAR (8) to the ball end of the upper CABLE (1 1) using one 5/16” SNAP HOOK (34) as shown in FIGURE 12.
MAINTENANCE MODEL #________________________ SERIAL #_________________________ DA TE OF PURCHASE: _____________ DEALERS NAME: _________________ DEALERS PHONE #_______________ 14 * W e recommend cleaning your product (pads and frame) on a regular basis, using warm soapy water .
15 NOTES: LIMITED W ARRANTY ParaBody extends the following LIMITED W ARRANTY to the original owner of the ParaBody products. The W arranty terms apply to IN HOME USE ONL Y . 1. LIMITED W ARRANTY ON FRAME AND WELDS. If the frame of the ParaBody product or a weld should crack or break, it will be repair ed or replaced by ParaBody .
INTERNA TIONAL OFFICES Life FitnessAtlantic BV Atlantic Headquarters Bijdorpplein 25-31 2992 LB Barendrecht The Netherlands Phone: (180) 646 666 Fax: (180) 646 703 Life Fitness Japan 8/F , Nippon Brunswick Building 5-27-7 Sendagaya Shibuya-Ku, T okyo 151-0051 Japan Phone: 81 (3) 3359-4309 Fax: 81 (3) 3359-4307 Life Fitness (UK) Ltd.
Een belangrijk punt na aankoop van elk apparaat ParaBody 887 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen ParaBody 887 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens ParaBody 887 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding ParaBody 887 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over ParaBody 887 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van ParaBody 887 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de ParaBody 887 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met ParaBody 887 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.