




Introduction Intended use Page 3 Technical specifications Page 4 Scope of delivery Page 4 Description of parts Page 4
Safety Instructions Avoid danger to life by electric shock Page 5 Avoid injuries and damages of the electric unit Page 6 Avoid danger to life by environmental effects Page 7
Before operation Page 7
Operation Switching flame simulator on / off Page 8 Using the dimmer function Page 8 Switching heating function on / off Page 8 Using the thermostat Page 10
Maintenance and cleaning Cleaning the housing Page 10 Cleaning the interior Page 11
Disposal Page 11
Information Service / Warranty Page 12 Declaration of conformity Page 12


Unfold the page with the illustrations and become acquainted with the functions of the unit before putting it into operation for the first time. In order to do so, please read the following operating and safety instructions. Only use the unit as described and for the indicated range of operation. Keep these instructions in a safe place. Please also hand over all docu- ments to third parties when passing on the unit.
Intended use The unit is intended for the generation of hot air in closed, dry rooms. The unit is intended for instal- lation into existing fireplaces. The electric flame simulator conveys a log fire atmosphere. Other types of use or modifications of the unit are not regarded as intended and pose serious danger of accidents. The manufacturer is not liable for any damages caused by any use other than for the intended pur- pose. The unit is designed for use in private households and not suitable for industrial purposes.
Technical specifications Model: AJ55-A Nominal voltage: 230 V ~, 50 Hz Rated power: max. 1.800 W Power stages: 2 (900 W, 1.800 W) Illuminants: 2 x 1 W LED Dimensions: 62 x 26 x 62 cm (w x d x h) Installation dimensions: 58 x 24 x 60 cm (w x d x h) Weight: approx. 18.5 kg
Scope of delivery Immediately after unpacking please check if the delivery is complete and also if all parts of the product are in good condition.
1 Fireplace insert, electric 1 Operating instructions
Description of parts 1 Ventilation slots 11 Dimmer switch 2 Right hand cover 12 Screws side parts 3 Front 13 Holes front 4 Power plug 14 Holes side parts 5 Glass plate 15 Insert artificial logs 6 Left hand cover 16 Reflecting surface 7 Switch second heating stage 8 Switch first heating stage 9 ON / OFF switch 10 Thermostat control
Introduction


Avoid danger to life by electric shock

Avoid injuries and damages of the electric unit

Avoid danger to life by environmental effects
Note: Make sure that the dimensions of your fireplace correspond to the assembly dimensions of the electric fireplace insert. • Insert the electric fireplace insert into your existing fireplace. Pay attention that you insert the electric fireplace insert into the existing fireplace from the front. ATTENTION! Do not place the unit directly beneath a wall outlet. In the case of non-observance danger of injury and / or damage to the unit can result. ATTENTION! Please pay attention that you do not pinch the power line and protect it against sharp edges. Damaged power lines increase the risk of an electric shock. Note: Make sure that the electric fireplace insert is correctly installed in the existing fireplace. Refer to the assembly instructions (see separate supplement) for your existing fireplace and / or call on a professional.
Your electric fireplace insert is now ready for operation.
The voltage of the power source must comply with the specifications on the name plate of the heater. Devices marked with 230 V can also be operated with 220 V. Before operation it is imperative to make sure that the installation location corresponds to the requirements of the safety instructions.





Cleaning the interior ATTENTION! RISK OF INJURY! The edges of the electric fireplace insert are very sharp. Therefore, please wear protective gloves during all maintenance work. ATTENTION! In no case should aggressive or corrosive cleaning agents be used. Otherwise product damage could result. Note: You require a Phillips screwdriver for this procedure.
All the packaging and packaging material consist of environmentally friendly materials. They can be disposed of in local containers.
Do not throw electric appliances in household waste!
According to European Directive 2002 / 96 / EC regarding old electric and electronic appliances and conversion to national law, used electric appliances must be collected separately and conveyed to an environmentally suitable recycling.
Refer to your local government or municipality for the current valid disposal methods for disused electric appliances.

You receive a 2-year warranty on this unit from the date of purchase. The unit was carefully manufactured and diligently inspected before being dispatched. Damage which is attributed to improper use as well as wearing parts are not included in the warranty.
WARNING! Only let your units be repaired by qualified specialists using only original spare parts. This ensures that the safety of your unit is maintained. WARNING! Always have the manufacturer of the unit or his / her customer service conduct the re- placement of the power plug 4 or the power line. This ensures that the safety of your unit is maintained.
EC Low Voltage Directive (2006 / 95 / EC)
Electromagnetic Compatibility (2004 / 108 / EC)

Melini


Eigenaren en ons team reageren doorgaans binnen een dag — en uw vraag helpt ook de volgende persoon.
Stel als eerste een vraag — andere eigenaren of ons team geven antwoord.