NL
Topcom logo
Officiële handleiding

Topcom 2501

120 pagina's·1.6 MB·Bloeddrukmeter·PDF·ENITJA
Topcom 2501
Inhoudsopgave 37 secties BPM Wrist 2501 · USER GUIDE HANDLEIDING MODE D’EMPLOI BEDIENUNGSANLEITUNG · ANVÄNDARHANDBOK · BRUGSANVISNING ANVÄNDARHANDBOK · … TonenVerbergen
Page 1 of the Topcom 2501 user manual — USER GUIDE HANDLEIDING MODE D’EMPLOI BEDIENUNGSANLEITUNG
Pagina 1 · klik om te vergroten
Pagina 1

BPM Wrist 2501

Topcom 2501 — BPM Wrist 2501 diagram (page 1)
Afb. 1 · BPM Wrist 2501

USER GUIDE HANDLEIDING MODE D’EMPLOI BEDIENUNGSANLEITUNG

ANVÄNDARHANDBOK

BRUGSANVISNING ANVÄNDARHANDBOK

KÄYTTÖOHJE MANUAL DE USUARIO

Page 2 of the Topcom 2501 user manual — BPM Wrist 2501
Pagina 2 · klik om te vergroten
Pagina 2

Exclusively produced for Topcom Europe NV,

Grauwmeer 17, 3001 Heverlee, Belgium

by Rossmax Int’l Ltd. N° 6018 Huyi Rd., Waigang, Jiading District,

This product is in compliance with the essential requirements and other relevant provisions of the directive 93/42/EEC and 89/336/EEC.

The Declaration of conformity can be found on : http://www.topcom.net/support/cedeclarations.php

GB The features described in this manual are published with reservation to modifications.

NL De in deze handleiding beschreven mogelijkheden worden gepubliceerd onder voorbehoud van wijzigingen.

F Les possibilités décrites dans ce manuel sont publiées sous réserve de modifications.

D Die in dieser Bedienungsanleitung umschriebenen Möglichkeiten, werden vorbehaltlichÄnderungen publiziert.

S Funktionerna i denna bruksanvisning publiceras med reservation för ändringar.

DK Vi forbeholder os retten til ændringer af de specifikationer, der er beskrevet i denne brugsanvisning.

N Funksjoner beskrevet i denne manualen kan endres uten nærmere informasjon.

SF Tässä ohjekirjassa julkaissut tiedot voivat muuttua ilman ennakkoilmoitusta.

ES Las características descritas en este manual pueden ser objeto de futuras modi- ficaciones.

Shanghai China 201806

Page 3 of the Topcom 2501 user manual — BPM Wrist 2501
Pagina 3 · klik om te vergroten
Pagina 3

1. Introduction 4 2. Safety instructions 4 3. Helpfull tips 5 4. Disposal of the device 5 5. Blood pressure 6 5.1 What is Blood Pressure? 6 5.2 Why Measure Your Blood Pressure? 6 5.3 Blood Pressure Standard 6 5.4 Blood Pressure Fluctuation 7 6. Battery installatiON 7 7. Buttons 8 8. Display 8 9. Applying the cuff 9 10. Measuring posture 10 11. Measurement 10 11.1 Important 10 11.2 Procedure 11 12. Memory 12 13. time adjustment 13 14. Technical specifications 14 15. Topcom Warranty 15 15.1 Warranty period 15 15.2 Warranty handling 15 15.3 Warranty exclusions 15

The CE symbol indicates that the unit complies with the essential

requirements of the directive 93/42/EEC and 89/336/EEC.

Page 4 of the Topcom 2501 user manual — 2 SAFETY INSTRUCTIONS
Pagina 4 · klik om te vergroten
Pagina 4

1 INTRODUCTION

Congratulations with your purchase of the Topcom BPM Wrist 2501. This fully automatic, wrist mounted blood pressure monitor is both easy to use and ideally suited for daily measurements. The large display includes systolic, diastolic and pulse, all clearly shown at the completion of each reading. In addition, you can store up to 50 measurements per Memory Zone, ideal for users who want to monitor and track their blood pressure on a regular basis. The BPM wrist 2501 is compact and portable, making it ideal for home use and travel.

Please read this manual carefully before use. For specific information on your own blood pressure, contact your physician. Put the user guide away in a safe place for future reference.

2 SAFETY INSTRUCTIONS

1. This product is for household use only. Is is not intended as a substitute for consultation with your doctor. 2. For users diagnosed with common arrhythmia (atrial or ventricular prema- ture beats or atrial fibrillation), diabetes, poor circulation of blood, kidney problems, or for users suffered from stroke, or for unconscious users, the device might not be suitable for use. Consult your doctor in case of any doubt. 3. The unit should not be operated by children so to avoid hazardous situa- tions. 4. The unit contains high-precision assemblies. Therefore, avoid extreme temperatures, humidity, and direct sunlight. Avoid dropping or strongly shocking the main unit, and protect it from dust. 5. Leaky batteries can damage the unit. Remove the batteries when the unit is not used for a long time. 6. Do not press the START key when the cuff is not placed around the wrist. 7. Do not disassemble the main unit or cuff. 8. If the unit is stored in a cold place, allow it to acclimate at room tempera- ture before use. 9. Clean the blood pressure monitor body and the cuff carefully with a slightly damp, soft cloth. Do not press. Do not bend the pre-formed cuff inside out. Do not wash the cuff or use chemical cleaner on it. Never use thinner, alcohol or petrol (gasoline) as cleaner. 10. To ensure accurate measurements, it is recommended that calibration be completed every two years.

Page 5 of the Topcom 2501 user manual — 4 DISPOSAL OF THE DEVICE
Pagina 5 · klik om te vergroten
Pagina 5

3 HELPFULL TIPS

Here are a few helpful tips to help you obtain more accurate readings:

  • Do not measure your blood pressure immediately after consuming a large meal. To obtain more accurate readings, please wait one hour before measuring.
  • Do not smoke or drink alcohol before measuring your blood pressure.
  • You should not be physically tired or exhausted while taking a measurement.
  • It is important that you relax during measurement. Try to take 15-minutes rest before a reading.
  • Do not take measurements if you are under stress or under tension.
  • Take your blood pressure at normal body temperature. If you are feeling cold or hot, wait a while before taking a measurement.
  • If the monitor is stored at very low temperature (near freezing), have it placed at a warm location for at least one hour before using it.
  • Wait about 5 minutes before taking the next pressure measurement.

4 DISPOSAL OF THE DEVICE

At the end of the product lifecycle, you should not throw this product into the normal household garbage but bring the product to a collection point for the recycling of electrical and electronic equipments. The symbol on the product, user guide and/or box indicate this.

Some of the product materials can be re-used if you bring them to a recycling point. By re-using some parts or raw materials from used products you make an important contribution to the protection of the environment. Please contact your local authorities in case you need more information on the collection points in your area.

Page 6 of the Topcom 2501 user manual — Prehypertension Systolic 120 - 139 Diastolic 80 - 89 80
Pagina 6 · klik om te vergroten
Pagina 6

5 BLOOD PRESSURE

5.1 WHAT IS BLOOD PRESSURE?

Blood pressure is the pressure exerted on the artery tube while blood flows through the arteries. The pressure measured when the heart contracts and sends blood out of the heart is systolic (highest). The pressure measured when the heart dilates with blood flowing back into the heart is called diastolic (lowest) blood pressure.

5.2 WHY MEASURE YOUR BLOOD PRESSURE?

Among the various health problems afflicting modern people, problems associated with high blood pressure are by far the most common. High blood pressure's dangerously strong correlation with cardiovascular diseases and high morbidity has made measuring blood pressures a necessity of identifying those at risk.

5.3 BLOOD PRESSURE STANDARD

The World Health Organization (WHO) and National High Blood Pressure Education Program has developed a Blood pressure standard, according to which areas of low and high-risk blood pressure are identified. This standard however, is a general guideline as individual's blood pressure varies among different people and different groups...etc.

Systolic >= 160 Diastolic >= 100 Stage 2 Hypertension

Systolic 140 - 159 Diastolic 90 - 94 Stage 1 Hypertension

Prehypertension Systolic 120 - 139 Diastolic 80 - 89 80

Systolic < 120 Diastolic < 80 Normal

It is important that you consult with your physician regularly. Your physician will tell you your normal blood pressure range as well as the point at which you will be considered at risk.

Diastolic (mmHg) ! · Systolic (mmHg) ->

Page 7 of the Topcom 2501 user manual — AAA
Pagina 7 · klik om te vergroten
Pagina 7

5.4 BLOOD PRESSURE FLUCTUATION

Blood pressure fluctuates all the time! You should not be worried if you encountered two or three measurements at high levels. Blood pressure changes over the month and even throughout the day depending on circumstances (state of mind, temperature, ...)

Ex. Fluctuation within the day for a Male, 35 years old.

18u 24u 12u 6u

6 BATTERY INSTALLATION

+ - -

AAA

AAA

  • Open the battery compartiment by pulling the cover away
  • Insert 2 AAA non - rechargeable batteries. Follow the polarity as indicated in the battery compartiment.

Do not shortcircuit & dispose of in fire. Remove the battery if this device is not going to be used for a long period.

Show 4 more labels / short text on this page
200 mmHg · Systolic · Diastolic · +
Page 8 of the Topcom 2501 user manual — 8 DISPLAY
Pagina 8 · klik om te vergroten
Pagina 8

7 BUTTONS

Topcom 2501 — 7 BUTTONS diagram (page 8)
Afb. 2
1. DATE/TIME button 2. SET button 3. Wrist cuff 4. POWER / START button 5. MEMO button 6. MEMORY ZONE button 7. Battery compartment 8. LCD display

8 DISPLAY

Topcom 2501 — 8 DISPLAY diagram (page 8)
Afb. 3
1. Date and Time 2. Systolic pressure 3. Diastolic pressure 4. Pulse rate 5. Battery Low indicator 6. Memory number 7. Stored in Memory Zone 2 8. Stored in Memory Zone 1
Page 9 of the Topcom 2501 user manual — 9 APPLYING THE CUFF
Pagina 9 · klik om te vergroten
Pagina 9

9 APPLYING THE CUFF

1. Remove all watches, jewelry, etc. prior to attaching the wrist monitor.Clothing sleeves should be rolled up and the cuff should be wrapped on bare skin for correct measurements.Apply cuff to left wrist with palm facing up.
2. Make sure the edge of the cuff is about 1 cm from the palm. In order to insure accurate-measurements.
3. Fasten the velcro strap securely around your wrist so there is no extra space between the cuff and the wrist. If the cuff is not wrapped tight enough ,the measurement values will be false.
4. If your physician has diagnosed you with poor circulation on your left arm, place the cuff around your right wrist.
Page 10 of the Topcom 2501 user manual — 11.1 IMPORTANT
Pagina 10 · klik om te vergroten
Pagina 10

10 MEASURING POSTURE

1. Relax your entire body,especially the area between your elbow and fingers. Place your elbow on a table so that the cuff is at the same level as your heart.

Your heart is located slightly below your arm pit.

Topcom 2501 — 10 MEASURING POSTURE diagram (page 10)
Afb. 4
2. If the cuff is not at the same level as your heart or if you can not keep your arm completely still throughout the reading, use a soft object such as folded towel to support your arm.

(X)

3. Turn your palm upwards.Sit upright in a chair, and take 5-6 deep breaths. Avoid leaning back while the measurementis being taken.

11 MEASUREMENT

11.1 IMPORTANT

1. This monitor automatically switches off 1 minute after the last key operation. 2. To interrupt the measurement, simply press any key. The cuff will deflate immediately after a key is pressed. 3. During the measurement, do not talk or move your arm or hand muscles. 4. The result will be stored automatically in the selected Memory Zone. Select the desires Memory Zone before measurement (see §12)
Page 11 of the Topcom 2501 user manual — 11.2 PROCEDURE
Pagina 11 · klik om te vergroten
Pagina 11

11.2 PROCEDURE

Topcom 2501 — 11.2 PROCEDURE diagram (page 11)
Afb. 5
1. Press the POWER button. All digits will light up, checking the display functions. The checking procedure will complete after about 2 seconds.
2. After all symbols appear, the display will show "0" with the designated Memory Zone.
3. After initialisation the monitor automatically inflates the cuff to approximately 180 mmHg. The measurement will begin.
Topcom 2501 — 11.2 PROCEDURE diagram (page 11)
Afb. 6

This monitor will re-inflate automatically to approximately 220mmHg if the system detects that your body needs more pressure to measure your blood pressure.

4. When the measurement is completed, systolic, diastolic and pulse will be shown simultaneously on the LCD screen.

When a mistake was detected during measurement the Error mark appears on the display

Page 12 of the Topcom 2501 user manual — 12 MEMORY
Pagina 12 · klik om te vergroten
Pagina 12

12 MEMORY

The BPM 2501 has two Memory zones. Each can store up to 50 measurements including the date and time The result will be stored automatically in the selected Memory Zone after the measurement.

Select the desires Memory Zone before measurement.

  • Press the MEMORY ZONE button to activate the display. The actual selected Memory Zone is displayed.
  • Press the Memory Zone button again to select the memory zone 1 or 2 in which you want to store the measurement result.
  • Press the POWER button to switch the unit off.

mon. d PM AM

mem.

To recall measurement results:

  • Press the MEMO button to activate the display.
  • Press the MEMORY ZONE button to select the memory zone 1 or 2 from which you want to recall the measurement result.
  • Press the MEMO button to confirm. The calculated avarage of all measurement together is displayed.
  • Press the MEMO button again to see the last measurement result.
  • Press the MEMO successively for prior values stored.

mon. d PM AM

mem.

Topcom 2501 — 12 MEMORY diagram (page 12)
Afb. 7

When the batteries are installed, the data in the memories will not be lost even when the Blood Pressure Monitor is switched off. Remove the batteries for more than 10 seconds to erase the memories.

Page 13 of the Topcom 2501 user manual — AM
Pagina 13 · klik om te vergroten
Pagina 13

13 TIME ADJUSTMENT

To adjust the date an time:

  • Press the DATE/TIME button, the month will blink on the display.

mon. d

  • Press the SET button succesively to change the month.
  • Press the DATE/TIME button to confirm the month. The day will blink on the display.
  • Change the day, hours and minutes as described above, using the SET button to change and the DATETIME button to confirm every setting.

AM

  • After setting the minutes, "0" will be displayed.
  • Press the POWER button to switch the unit off.
Page 14 of the Topcom 2501 user manual — 14 TECHNICAL SPECIFICATIONS
Pagina 14 · klik om te vergroten
Pagina 14

14 TECHNICAL SPECIFICATIONS

3V DC: Two LR03 (AAA) Non rechargeable batteries Oscillometric Pressure: 20~250 mmHg Pulse: 40~199 beats/minute Pressure: ±3 mmHg Pulse: within ±5% of reading Semi-conductor Pump driven Automatic Pressure release valve 50 memories for each zone 1 minute after last key operation 10°C~40°C(50°F~104°F) 40~85% RH max. -5°C~60°C (23°F~140°F) 10~95% RH max. 120g (without batteries) 13.5~22 cm (5.3”~7.7”) Over 18 years old 79(L) x 72(W) x 71(H) mm Short time operation 2 minutes Classification of type BF

Measurement method Measurement zone

Pressure sensor Inflation Deflation Memory capacity Auto-shut-off Operation environment

Weight Wrist circumference Limited patient Dimensions K.B. Classification

*Specifications are subject to change without notice.

Power source · Accuracy · Storage environment

Page 15 of the Topcom 2501 user manual — 15.3 WARRANTY EXCLUSIONS
Pagina 15 · klik om te vergroten
Pagina 15

15 TOPCOM WARRANTY

15.1 WARRANTY PERIOD

The Topcom units have a 24-month warranty period. The warranty period starts on the day the new unit is purchased. Consumables or defects causing a negligible effect on operation or value of the equipment are not covered. The warranty has to be proven by presentation of the original purchase receipt, on which the date of purchase and the unit-model are indicated.

15.2 WARRANTY HANDLING

A faulty unit needs to be returned to a Topcom service centre including a valid purchase note. If the unit develops a fault during the warranty period, Topcom or its officially appointed service centre will repair any defects caused by material or manufacturing faults free of charge. Topcom will at its discretion fulfil its warranty obligations by either repairing or exchanging the faulty units or parts of the faulty units. In case of replacement, colour and model can be different from the original purchased unit. The initial purchase date shall determine the start of the warranty period. The warranty period is not extended if the unit is exchanged or repaired by Topcom or its appointed service centres.

15.3 WARRANTY EXCLUSIONS

Damage or defects caused by incorrect treatment or operation and damage resulting from use of non-original parts or accessories not recommended by Topcom are not covered by the warranty. The warranty does not cover damage caused by outside factors, such as lightning, water and fire, nor any damage caused during transportation. No warranty can be claimed if the serial number on the units has been changed, removed or rendered illegible.

Vraag stellen over de Topcom 2501

Eigenaren en ons team reageren doorgaans binnen een dag — en uw vraag helpt ook de volgende persoon.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
Nog geen vragen over de Topcom 2501

Stel als eerste een vraag — andere eigenaren of ons team geven antwoord.

Origineel document

Topcom 2501 handleiding-pdf

120 pagina's·1.6 MB·Bloeddrukmeter·PDF
Klik op een bovenstaande pagina om deze hier te openen
Pagina 1 / …
100%
Pagina's laden…